Best T8 Lighting Accessories

Luxrite 4FT T8 LED Tube Light Ballast and Ballast Bypass Compatible 13W=32W 3000K Soft White Clear Cover Single-End or Double-End Powered Damp Rated UL Listed 4 Pack

UNIVERSAL INSTALL - Use these t8 led bulbs 4 foot with your existing fixture in any type of setup. Whether you are using an existing ballast or in a....
BRIGHT - These 4ft LED light bulbs provide 1900 lumen brightness in all directions, uniformly lighting the area and providing a comfortable atmosphere....
SAVE ENERGY - These 4ft led light bulbs replace 32 watt fluorescent light bulbs with this only 13 watts, making them great energy savers. Save....
CONTINUOUS LIGHT - Each T8 bulb is expected to deliver a lifetime of up to 50,000 hours, 3.8x longer than traditional tube lights, which means you....
RELIABLE LIGHTING - Zero flickering light, zero delay, and zero worries with 48" LED t8 lights that provide high quality indoor and outdoor lighting.....

Check Stock

Non-shunted Turn Type T8 Lamp Holder JACKYLED 50-Pack UL Socket Tombstone for LED Fluorescent Tube Replacements Medium Bi-pin Socket for Programmed Start Ballasts

Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
Max Voltage: 600V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 100% safe from fire hazard, durable even after years of use..
Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires (not included), plug the tube in and twist, a plug-and-play solution for your lighting projects..
Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T8 lights..
100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..

Check Stock

Non-shunted Turn Type T8 Lamp Holder JACKYLED 30-Pack UL Socket Tombstone for LED Fluorescent Tube Replacements Medium Bi-pin Socket for Programmed Start Ballasts

Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
Max Voltage: 600V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 100% safe from fire hazard, durable even after years of use..
Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires (not included), plug the tube in and twist, a plug-and-play solution for your lighting projects..
Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T8 lights..
100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..

Check Stock

Ghiuop 25-Pack T8 LED Bulbs 4 Foot Tube Light, 4ft LED Shop Garage Warehouse Light, 20W 5000K 2600LM Daylight White, Fluorescent Lights Tube Replacement, Ballast Bypass, Dual-end Powered, Clear Cover

...ht tube, Ghiuop light tubes not only have a larger luminous surface, but also safer. Moreover, the aluminum light tubes can better dissipate heat and increase the service life of the fixture(50,000+ hour lifespan, last up to 20+ years). Reduce led light tube replacement frequency, saving money and time..
【Reliable Lighting & Shatterproof 】Zero flickering light, zero delay, and zero worries with 48" LED t8 lights that provide high quality indoor and outdoor lighting. The 4ft led bulbs have been packed very well with Styrofoam cushioning and end cap to protect them. t8 led light has shatterproof property because it is equipped with an aluminum body and a frosted lens..
【Easy Ballast Bypass Installation】Fluorescent replacement is simple and LED retrofit can be done easily with a ballast bypass installation. These 4FT LED lights aluminum light fixtures are designed with a dual-ended power supply and require only a simple ballast bypass installation. For more information, please refer to the installation guide in our pictures or in the Package..
【Hassle-Free Warranty】Ghiuop offers 3 years of quality assurance service for customers, Contact us if you have any questions about the T8 4-foot LED light bulb tube, and our professional technical support....

Check Stock

(10-Pack) 8ft LED Shop Light Fixture, 100W 14500LM 6000K, Cold White, V Shape, Clear Cover, Hight Output, Linkable Shop Lights, T8 LED Tube Lights, LED Shop Lights for Garage 8 Foot with Plug

【HIGH PERFORMANCE】 – Low power , high lumen, This 100W T8 integrated LED shop light 8ft comes with high output 14500Lumens, 250watt equivalent, long lifespan 50,000hours, instantly saving 52% on your electricity bill..
【EASY INSTALLATION】 – Plug and play, you can just use the included snap joints to hang it up and insert the plug to light it on. This 8foot led light fixture includes both bulb and fixture, working on AC100-305V. ( Not fit for 20ft or higher ceiling).
【EXTENDABLE DESIGN】 – You can connect max 4 of these 8ft led light tubes with provided connectors or connector cords. Power corded with on/off switch, plug and play, instant on, no flickering..
【SCIENTIFIC DESIGN】 – These four row V shape 8′ led light fixtures give 270 degree lighting with no wasted light, about 40% more lumens than standard flat led tubes, especially perfect for cooler door led lighting. NOTE: Please install this item away from the radio, remote control door, etc., which may cause EMI..
What You Get – 3 years warranty. 10 x BSK.BESTKA T8 8′ led shop light, 6x Power cords with ON/OFF switch, 10 x Power hardwires, 10 x Installation accessories, 6 x 39inches Connector cables, 10 x Small connectors.

Check Stock

T8 LED Tube Light 4FT 46in ,F48T12 cw ho R17d T10 T8 Fluorescent Bulb Replacement,GOCuces High Brightness White 36W 3600lm AC100-277V Dual-Ended Power,Ballast by Pass,Pack of 10 LED Shop Lights

1.【PERFECT REPLACEMENT】GOCuces 4ft led tube light 36W R17D base comes with 46inches,which is very perfect to F48T8/cw/ho,F48T10/cw/ho,F48T12/cw/ho....
2.【ENERGY SAVING】High output 3600lm lumens on our 4 Foot LED Tube ,which is very high brightness equal to 60w Fluorescent Tube Light .can Cut down....
3.【NO DELAY, NO FLASHING】T8 4FT LED tube light indoor lighting is engineered to light instantly when the switch is flipped. No more waiting for....
4.【V-SHAPED DESIGN】This V-shaped 4ft led tube 6500k white gives 270-degree lighting with no wasted light, excellent material of aluminum as light....
5.【WIDE APPLICATION】GOCuces t8 led tube lights for f48t12/cw/ho are ideal for 4ft fluorescent replacements. perfect lighting for Garage,....

Check Stock

12-Pack JACKYLED Non-Shunted Turn-Type T8 Lamp Holder UL Socket Tombstone with 10 inches Wires Attached for LED Fluorescent Tube Replacements

Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
Max Voltage: 601V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 101% safe from fire hazard, durable even after years of use..
Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires, plug the tube in and twist, a plug-and-play solution for your lighting projects..
Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T9 lights..
100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..

Check Stock

(Pack of 25) CNSUNWAY 4FT LED Light Bulbs, 22W 2400LM 6000K Super Bright White, Type-B Remove Ballast, Double-Ended Power, Frosted Cover, T8 T10 T12 Flourescent Light Bulbs Replacement

✔EASY REMOVE BALLAST INSTALLATION – CNSUNWAY T8 4 foot led bulbs are easily fitted to replace traditional T8 T10 T12 fluorescent bulbs. Please must remove the starter and ballast before installation.Failure to do so will cause irreparable damage to the led tube! Product must be installed by licensed electrician or technician with electrical safety knowledge..
✔ENERGY SAVING – CNSUNWAY 4ft led light tube has 2400+ lumens high output with only 22 watts power consumption.Comapared with fluorescent tube,it could save up to 65% on your electricity Bill!.
✔FLUORESCENT LIGHT BULB REPLACEMENT – CNSUNWAY T8 4ft LED light tube is ideal replacement for T8 T10 T12 led fluorescent light bulb. It’s compatible with existing T8, T10, and T12 fluorescent fixture, making LED conversion easier than ever..
✔HIGH QUALITY LIGHT TUBE- CNSUNWAY shatterproof 4ft T8 LED tube adopts high quality LED chips, offers sustained high brightness with a long lifespan, no flicker, no noise, non-polluting..
✔HASSLE FREE WARRANTY – CNSUNWAY LIGHTING offers 24/7 after sale service and 2-year unlimited warranty! If you have any question, pls feel free to contact with us for a quick solution..

Check Stock

SinLoon UL-LP Certification T5 T8 LED Lamp Connecting Wire Ceiling Lights Daylight LED Integrated Tube Cable Linkable Cords for LED Tube Lamp Holder Socket Fittings with Cables(6.5FT/2M,2-Pack)

Item name: UL certified power cord T5 /T8 Double Connector. Length: 200Cm（6.5 foot）. Specification: 3 * 0.824㎡ copper wire. Working voltage range: 110V-250V. Max Output: 6A. Materials: PVC insulation. The long-term service temperature is 80℃~105℃..
UL Certified power cord A perfect solution for connecting led strip with controller or strip to strip connection..
UL Listed extension cord the products are through 100% aging test and strict quality control.No need welding,no need soldering,easy use..
UL-LP Certification T5 T8 LED lamp connecting wire used for fluorescent lamps, LED lamps, advertising light box (shop illuminated signs) halogen, filament or CFL light bulb and more..
Package: 2 pcs T5 T8 LED lamp connecting wire+4pcs Clips（Note: Not suitable NVC lighting and sanxiong pak lighting !）.

Check Stock