Best T type Elevator Guide Rail

Router Table Coping Sled, Rail Guide Safety Coping Sled Router Table Tenoning Safety Pushing Clamp for Cutting Precise Joints for Cabinet Door Drawer Fronts Carpenters Woodpeckers Woodworking Tools

  • Clear Acrylic Fence: Our coping sled uses the fence as a reference instead. The rail guide coping sled features a clear acrylic fence for reference which is offset and raised 2″ above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • How It Works: Hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
Check Stock

OdontoMed2011 New German Grade Basic Dental Instruments Set Mouth Mirror, Explorer #5,Cotton PLIER ODM

  • EXCELLENT QUALITY NEW GERMAN SET OF 25 Veterinary Dental Extraction Instruments Kit Forceps.
  • 1 ROUND SCALPEL HANDLE 10 SCALPEL BLADE # 15C 1 GERMAN BABY PEROSTEAL ELEVATOR 1 GERMAN DENTAL EXTRACTING FORCEPS, UNIVERSAL, MINI-150S 1 GERMAN DENTAL EXTRACTING FORCEPS, UNIVERSAL, MINI-151S 1 GERMAN DENTAL EXTRACTING FORCEPS, UNIVERSAL, MINI-23S 1 EACH IRIS SCISSORS CURVED BLADE.
  • 1 T/C OLSEN HEGAR NEEDLE HOLDER, COMBINED SUTURE SCISSORS 5.50" 1 BROWN-ADSON TISSUE FORCEPS 4.75" 7X7 TEETH 1 OPERATING SCISSORS (SUTURE SCISSORS) 5.50" STRAIGHT S.
  • 1 GERMAN DENTAL LUXATING ELEVATOR STRAIGHT, 2mm 1 GERMAN DENTAL LUXATING ELEVATOR STRAIGHT, 3mm 1 GERMAN DENTAL LUXATING ELEVATOR STRAIGHT, 5mm 1 GERMAN DENTAL LUXATING ELEVATOR CURVED, 3mm 1 GERMAN DENTAL LUXATING ELEVATOR CURVED, 4mm 1 GERMAN DENTAL LUXATING ELEVATOR CURVED, 5mm.
Check Stock

POWERTEC 71387 55\ Guide Rail Joining Set for Makita or Festool Track Saws | Includes (2) Aluminum Extruded Guided Rails and (2) Guide Rail Connectors for Woodworking Projects

  • Kit includes: (2) 55” guide rails and (2) track saw guide rail connectors.
  • Function: This exclusive track saw track connector kit conveniently helps you to align your saws, while connecting one guide rail to another guide rail.
  • Premium quality: Made from professional grade extruded aluminum for high performance use, long lasting durability and dependable rust resistance for all of your track saw applications and woodworking projects.
  • Compatibility: The 55” GUIDE rails is compatible with Makita plunge saw and Festool track saws.
  • Plus you can easily customize length using the POWERTEC Saw Guide Rail Connector kit, or fits Makita connector or Festool Connector for longer cuts. Additionally, this handy track saw tool can be used with the guide rail adapters and other rail guide devices to extend its compatibility to a wider range of machines, such as routers.
Check Stock

Iverntech MGN12 400mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Surface technology: Anti-oxidation by electroplating (nickel plating).
  • Rail Guide Material: bearing steel. Rail Guide Length: 400mm.
  • Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile.
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out.
Check Stock

Usongshine MGN9C Linear Rail Bearing Sliding Block Match use with MGN9 Linear Guide for CNC xyz DIY Engraving Machine (200mm, C-Type)

  • Surface technology: Anti-oxidation by electroplating (nickel plating).
  • Rail guide material: bearing steel. Rail guide length: 300mm.
  • Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile.
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out.
Check Stock

Fulton Rail Guide Coping Sled PRO For Cutting Profiles Into The End Grain Of Your Stock | Ideal for Cutting Precise Clean Joints for Cabinet Door and Drawer Fronts

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock

Lil' Jumbl Kids Wooden Dollhouse, with Elevator, Balcony & Stairs, Accessories & Furniture Included X-Large 3 Story Easy to Assemble Doll House Toy

  • A KID’S DOLLHOUSE DREAMS COME TRUE | Discover a Multi-Story Mansion Beyond Your Child’s Wildest Imagination! | This Magnificent 4’ Wooden Dollhouse Provides Tots with a Life-Size Domestic Diorama Featuring 3 Floors, Multiple Rooms, a Built-In Elevator, Balcony & 12-Piece Accessories Set.
  • FINELY CRAFTED WOOD CONSTRUCTION | Unlike Cheap Cardboard & Other Inferior Materials, Our Heirloom-Quality Dollhouse is Built to Last for Decades with a Combination of Solid Pinewood, Plywood, MDF & Fabric Materials for Lightweight Maneuverability & Heavy-Duty Performance | Freestanding Design Gives Children Easy Eye-Level Access & Displays Beautifully on the Floor Like a Piece of Furniture.
  • DOLLHOUSE FURNITURE SET INCLUDED | Highly Realistic, Meticulously Decorated & Fully Immersive, Our Imaginative Play Set Has Little Ones Playing Straight Out the Box with 12 Lifelike Accessories: Living Room Sofa, Lamp, Kitchen Table, Chairs, Bathtub, Toilet, Piano, Bench, Patio Umbrella, Canopy Bed & Bedroom Nightstand | Rooms are Also Covered in Colorful, Detailed Wallpaper for Gorgeous Aesthetic.
  • WORKING ELEVATOR & JULIET BALCONY | Fun Extras Encourage Educational Play, Creativity, Imagination & Collaboration Including an Integrated Outdoor Balcony Space, Window Cut-Outs, Fu....
Check Stock

SIMAX3D MGN12H 350mm Linear Rail Guide 2pcs MGN12 Linear Slide 8mm for 3D Printer and CNC Machine Upgrade (2pcs/Pack)

  • Package Include: MGN12H 350MM Linear Rail Guide *2PCS.
  • Each MGN12 350MM is fully oiled and packed individually..
  • SIMAX3D MGN12 Linear Rail Guide 350MM is made of heavy-duty bearing steel, which is more durable than other bearings, high stiffness, high precision, smooth running and low noise..
  • Linear Rails 350MM is widely used in industrial robots and CNC and other large.
  • MGN12H Linear Slide 350MM Note: Please use M3 T nut and screw to fix the linear rail for 20 series EU Al-profile..
Check Stock

Mssoomm 15mm HGH15 CNC Square Linear Guide Rail Kit 2Pcs HGH15-25.2 inch / 640mm +4Pcs HGH15 - CA Square Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project

  • HGH15 linear guide rail set includes 2Pcs HGH HGR15-640mm（25.2 inch）linear guide rail and 4Pcs HGH15CA square type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGW 15 linear rail kit.
  • The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
  • The square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
  • More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
  • Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGH-HA, HGW-CA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you can use s....
Check Stock