Best T slot Grooving Bars

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

Hooke Road Overland HD Truck Bed Rack Adjustable Height Aluminum Ladder Rack for Toyota Tundra Tacoma Nissan, Rooftop Tent Carrier Cargo Storage Luggage Organizer

【800 lbs Capacity】 - Maximum on-road rating of 800 lbs. Maximum off-road rating of 500 lbs. Carries luggage from snowboards, kayaks, surfboards, bikes, rooftop tents, lumber, and more.
【Secure Your Load】 - T-Slot Attachments make adding gear mounts and accessories fast and simple. Accepts T-Slot accessories like Eye Bolts, Recovery Track Mounts, RotoPax Mounts, and Tool Holder(Not included). Integrated Tie Down Points that allow you to secure your load with ratchet straps or bungees. Integrated SKS (Same Key System) locks to secure your rack system to the truck bed.
【Reinforced Structure】 - Heavy-duty aluminum alloy construction and durable textured black powder-coat finish. Reinforced structure with 4 adjustable bed side bars. Each side is equipped with 2 side bars and creates the ultimate truck bed cargo management system by adding these telescoping bars. Product Weight about 88 lbs.
【Adjustable Bars】 - Adjustable height to create custom set-ups for maximum utility and versatility. Adjustable height from 18.7" - 23.5", adjustable side bars....

Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using the Fulton 18 inch Precision Steel Miter Bar! Attach the steel bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our steel bar versus plastic or aluminum gives your sled, jig or fixture more strength and stability and it won’t bend or warp..
When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The Fulton Precision Steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit..
Not only is the Fulton Steel Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are three threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (not included). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included)..
Once you mount the bars to your sled, jig or fixture you are sure to fee....

Check Stock

PVC Plastic Floor Slotting,Groover Beech Wood Grooving Gouge Steel Slotting Knife Flooring Tools for PVC Plastic Floor

【Durable in use】Made of beech wood and steel material, whic is hard and impact resistant, not easy to deform and durable..
【Easy to use】Using newly upgraded beech wood handle with comfortable hand grip and easy to use..
【Apply to】This slotting tool is suitable for PVC plastic floor grooving gouge, practical and powerful..
【High Efficient】Adopt riveting method to lock, no rotation during slotting operation with high work efficiency..
【Professional design】Come with 3 slotting spare blades, which make construction more convenient and quick..

Check Stock

MEIGGTOOL Three Gear Spoilboard Surfacing Router Bits, 1/2-Inch Shank,Lab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Bit

Easy To Use - Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine.
Material - Industrial grade C3 micro grain carbide blade, more sharp, smooth cutting, impact resistance, high toughness.
Wide Usage - This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking.
Feature: The MEIGGTOOL Surfacing Router Bit is perfect for woodworking, edging, trimming, grooving, veining wood projects, and ideal for carpenters and hobbyists of all experience levels..

Check Stock

Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do..
The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect sub-fence on the crosscut sled. The included knob and bolt is for making a simple stop block which when finished, can slide the length of either track along the sub-fence. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut..
We have also included a full color and detailed how to guide book to help you with the crosscut sled building process. Each kit comes with 2 each 19” long by 3/4” by 3/8” UHMW bars, 2 each 12” long mini tracks, 1 each knob, 1 each 1/4” by 20 tpi bolt and a how to build your own crosscut sled guide book. Make your crosscut sled to the size you want or....

Check Stock

ZEROPLAY 360 Sled Kit

ZEROPLAY Miter Bar’s hassle-free miter bars using One-Touch Calibration..
ZEROPLAY Miter Bars will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0. 73" and 0. 79" wide and at least 5/16" deep..
Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks..
No slop, side-to-side play or seasonal warping..

Check Stock