Best T c t Saw Blade

FOXBC U-Shank Jigsaw Blades Set fit Black+Decker BDEJS600C BDEJS300C, JS515 (75-626) for Cutting Wood Metal - 24 Pieces with Case

  • GINEPAN Jigsaw Blades T Shank are made of High-Carbon steel through multiple processes such as quenching/burning/returning/Grinding, making the jig saw blades more durable..
  • T101AO 20TPI Jigsaw Blade Designed for Curved & Scrolling Fine Finish Cuts in double-sided laminates, laminated substrates, mdf, hard and soft woods, and plywood. Pointed teeth reduce splintering on both sides of the workpiece..
  • COMPATIBLE -- T-shank design fits over 95 percent of current jigsaws such as : GINEPAN, Bosch , DEWALT , BLACK and DECKER , TOOLDO , Makita , SKIL , Ryobi and Rockwell BladeRunner x2 jigsaw blades.
  • Factory direct price! GINEPAN T Shank jigsaw blade provide the best cost but remain in great quality. 30-day no reason return service, please rest assured purchase products..
  • 20 Piece GINEPAN universal T101AO jigsaws jig saw blades accessory kit with case. (Warm tips: Since the attached Case is compatible with most saw blades, the gap is relatively large. T101AO saw blade is small, easy to scatter in the Case, but does not affect the use).
Check Stock

Sailor Moon Short Stories 1

  • Replaces Part Number : Stihl 3610 005 0055, 61 PMM3 55 ,Oregon 90PX055G,Husqvarna H38-55.
  • TriLink CL14355TL2.Carlton N4C-556. For saw sizes up to 42 cc.
  • Firmer grip on wood and Less chance of kickback..
  • Compatible with chainsaws :017, 018, 019, E 140, MS 170, MS 171, MS 180 C, MS 180 C-B, MS 180 C-BE, MS 180 G, MS 191 T, MS 192 C, MS 192 C-E, MS 192 T, MS 192 T C-E, MSE 140, MSE 140 C.
  • Compatible with pole saw: HT70, HT73, HT75, HT100, HT101, HT130, HT131, HT250.
  • For McCulloch 2012, 3214, 3216, 3516, 3518, 3816, 3818, D176 110, D176 115, D176 120, D176 130, D176 140, D176 155, D176 160s, D176 165, D176 175, D176 310, D176 320, D176 330,.
  • Delivering a high-quality, load-bearing surface that resists wear and improves strength.
  • If you can't make sure the specs of above models , please contact us before make order..
Check Stock

Sili Saw Blade Sleeve • 10 inch Saw Blade Protector • Protects 10 inch Table Saw and Circular Saw Blades

  • If you’re like most DIY’ers or woodworkers, you have a few saw blades laying around your garage or workshop. You could make a saw blade rack out of scrap lumber or maybe stack the blades in a corner exposing your blade cutters to getting chipped. The best solution is to protect your blades by simply slipping a blade into a Sili Saw Blade Sleeve. Once in a sleeve, you can hang your blade up and out of the way! All the while protecting you and your saw blade from harm while its not in use..
  • Made from a softer silicone rubber material, the Sili Saw Blade Sleeve is perfect for protecting your saw blades. While some blades are inexpensive compared to others, why not protect your blades from the daily rigors of job site or workshop use to get the absolute most out of them. The silicone material neatly wraps around the teeth of your saw blade and won’t mark or mar the blade..
  • These are the ideal storage solution for contractors. With each of your blades protected with a Sili Saw Blade Sleeve, you’ll know that when you get to the next job your blades are ready to go! No more changing blades and seeing a chipped tooth or two rendering the blade useless. Not only will the Sili Saw Blade Sleeves save you time, but they’ll save you money by cutting back ....
Check Stock

BLACK+DECKER Jig Saw Blade for SC500 Navigator Saw, Wood Cutting (74-591) Large

  • GINEPAN Jigsaw Blades T Shank are made of High-Carbon steel through multiple processes such as quenching/burning/returning/Grinding, making the jig saw blades more durable..
  • T101BR Jigsaw Blade Variable-pitch tooth pattern for Fast & Accurate/clean cuts（Tooth Down） in hard and soft wood, plywood, plastics, OSB, laminated particle board 3/16 In. to 1-1/4 In. thick. 10 TPI Tooth.
  • T-shank design fits over 95 percent of current jigsaws such as : Compatible with DEWALT, GINEPAN, Bosch, BLACK and DECKER, TOOLDO, Makita, SKIL, Ryobi and Rockwell BladeRunner x2 jigsaw blades.
  • 20 Piece GINEPAN universal T101BR jigsaws jig saw blades accessory kit with case..
  • Factory direct price! GINEPAN T Shank jigsaw blade provide the best cost but remain in great quality. 30-day no reason return service, please rest assured purchase products..
Check Stock

AUTOTOOLHOME TCT Hole Saw for Steel Tungsten Carbide Tipped Hole Saw Drill Bit T.C.T Hole Cutter with M2 Titanium Plated Pilot Drill Bit Professional for Hard Metal Stainless Steel Cast Iron (2-3/8\(60mm))

  • ... cutting, more precise, smooth,longer service life cuts up to 1~25mm thick material like stainless steel, high alloy steel, aluminum, castings, section steel, iron, copper and other hard alloys. plastic,wood, FRP and PVC.Note: Cannot be used for concrete, tiles and stone..
  • This TCT hole Saw teeth designed with Three-blade,with outer blade, middle blade, inner blade, small incision resistance and no burrs during drilling. Opening neat, smooth, no broken edges, no tremor phenomenon, chip easily.ideal for cutting hard metals.
  • T.C.T. cutters widely used for electrical construction, transit work and general metal fabrication.Suitable for installation in drill presses, bench drills,hand held electric drill,impact drill,magnetism drilling machine and so on..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body with chip hole,Fast chip removal, then cuts a clean, burr-free hole faster than conventional twist drills or hole saws.Remember to add coolant during continuous high-speed drilling..
Check Stock

Outdoor Edge SwingBlade-Pak, Knife-Saw Hunting Combo Set with Rotating SwingBlade Skinning-Gutting Knife, T-handle Wood/Bone Saw and Leather Sheath - Orange

  • The ultimate hunting combo set with the rotating SwingBlade knife and T handle wood and bone saw is ideal for quartering big game..
  • SwingBlade knife skinning blade 3.6 inches, gutting blade 3.2 inches, overall length 8.3 inches.
  • Kodi Saw 6 inches long, overall: 9 1/4 inches long.
  • AUS 8 Stainless steel vacuum heat treatment and subzero quenched Rockwell C hardness: 57 to 58.
  • SERVICE FOR LIFE – Outdoor Edge produces quality cutting tools that are built to last.
  • If you have a problem with your Outdoor Edge knife contact us.
  • we address all replacement and service requests..
Check Stock

DEWALT 20V MAX XR Jig Saw, Tool Only (DCS334B) , Yellow

  • Brushless motor of the cordless jigsaw delivers efficient performance for longer runtime (vs. DCS331 Jig Saw).
  • Compact size for easy grip and maximum control of the jig saw.
  • Bright LED on the jigsaw tool helps illuminate dimly lit work surfaces.
  • Variable speed trigger and dial provide precise speed control.
  • All-metal, lever-action keyless blade change allows for quick and easy t-shank blade changes.
  • Integrated dust blower helps clear line of sight while cutting.
  • 4-position orbital action provides control of cut quality and speed.
  • All-metal, keyless shoe bevel with detents at 0 degree, 15 degree, 30 degree, and a positive stop at 45 degree for easy adjustment.
  • No-mar shoe cover to help protect work surface from scratches.
  • Accepts t-shank jig saw blades for optimal holding power and professional results.
Check Stock

DEWALT 20V MAX Jig Saw, Barrel Grip, Tool Only (DCS335B) , Black

  • Brushless motor of the cordless jigsaw delivers efficient performance for longer runtime (vs. DCS331 Jig Saw).
  • Jig saw has a compact size for easy grip and maximum control.
  • Bright LED light on the jigsaw tool helps to illuminate dimly lit work surfaces.
  • Variable speed dial provide precise speed control.
  • All-metal, lever-action keyless blade change allows for quick and easy t-shank blade changes.
  • Integrated dust blower helps clear line of sight while cutting.
  • All-metal, keyless shoe bevel with detents at 0 degree, 15 degree, 30 degree, and a positive stop at 45 degree for easy adjustment.
  • No-mar shoe cover to help protect work surface from scratches.
  • 4-position orbital action provides control of cut quality and speed.
  • Accepts t-shank jig saw blades for optimal holding power.
Check Stock

WORKPRO 36-Piece Woodworking Jig Saw Blade Set, T-Shank, Assorted Blades for Fast and Clean Wood Cutting

  • Woodworking Applications: The WORKPRO 36-Piece T-Shank Jig Saw Blade Set offers an assortment of blades to woodworking applications.
  • CRV Steel: Made with CRV(Chrome Vanadium) steel for maximum life in wood material for clean and speed cuts. High-Quality manufacturing to provide superior wear tolerance and life.
  • T-Shank Design: T-shank design fits all Bosch, DEWALT and other major brands jig saws.
  • Including: The blade set includes twelve each of T101D, T101BR and T144D jig saw blades. The T144D(4'', 6TPI) speed for wood, straight and very fast cuts. The T101D(4'', 6TPI) for clean and precise straight cutting. The T101BR(4'', 10 TPI) clean for wood (reverse tooth to minimize top splintering).
  • Storage: The set comes with a durable case to keep blades neatly together.
Check Stock