Best Swivel Vise

RIDGID 40220 461 Straight Pipe Welding Vise, 1/2-inch to 8-inch Pipe Welding Clamp,Red,Small

Designed for secure clamping onto straight pipes.
pipe welding vise is available in straight, angle, elbow and flange styles.
Constructed of durable, performance-proven material for reliable, long-lasting use.
Straight welding vise resists strain, heat and warping during tacking.
Machined swivel nuts and pins combined with special chain screws allow for smooth, trouble-free vise assembly onto the pipe.
Straight pipe welding vise has a 1/2-inch to 8-inch (15 mm to 200 mm) pipe capacity.

Check Stock

Yost Vises LDPV-6 Drill Press Vise | 6 Inch Jaw Width Portable Vise | Blue

...is crafted from cast iron. Durably light-weight and portable with texture jaws..
TECHNICAL SPECS: Jaw Width 6” (15.24 cm), Jaw Opening 5.75" (14.605 cm), Throat Depth 1" (2.54 cm), Slot Width: 0.6" (1.52 cm), Slot centerline: 7.15" (18.16 cm)..
HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual..

Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

...agnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching, as a golf club vise, and more. For mid-torque bench vise clamping applications see or SH60 grey medium density vise pads..
PROTECTIVE SURFACE – While incredibly tough, our 4″ vise soft jaws specially textured surface won’t mar, scratch or discolor delicate....

Check Stock

Raynesys Bench Vise, 4-1/2\ for Workbench, 4.5 Inch Table Vise Heavy Duty with 260° Flexible Swivel Base for Woodworking, Metalworking, Cutting Conduit, Drilling - Blue

...h ductile iron and chrome-plated spindle and nuts, durable for long-term use and reliable to grip. The jaw adopts quenching and re-fire technology to increase its hardness and strength. Non-slip textured surface increases the grip force of jaw, which firmly holds the material, save time and effort when you work..
【Swivel Feature】: Built in 260 degree swivel base, perfect for a wide range of clamping angles. It allows an ever greater degree of accuracy while you are working with a hand tool as there is no need to keep inserting and removing the piece you are working on..
【Rubber Jaws Covers】: Packaged with 125mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plastic, tubing, threaded items, safely protecting any flat or round product. Provide three kinds of angle for clamping items: 45°, horizontal angle, vertical angle. Please refer to the picture for angle diameter..

Check Stock

6-Inch Cross-Slide Drill Press Vise X-Y Compound Vise 2 Way Heavy Duty Cross Slide Vise Clamp Machine Metal Milling

Material - This X-Y compound vise made of heavy duty cast iron construction, Powerful serrated steel jaws.
Size - 6" wide machinist jaws ,Maximum jaws opening: 5.9" , Jaw depth 2.08 inch.
Vice Travel X: 5.5inch Vice Travel Y: 7.48inch.cold rolled steel....
Usage - uyoyous cross slide vise have swivel crank handles for adjusting vise front to back and left to right, bolt down slots for securing..
Function - Hinged vise crank handles drops out of the way, designed for woodworking and metalworking..
Wide Application - our heavy duty cross slide vise designed for woodworking and metalworking, widely used in milling machine, drill press and....

Check Stock

Work Bench Vise with 2 Packs Magnetic Vise Jaw Pads, Metal Table Vise with Swivel Base and Anvil, Heavy Duty Bench Vice for Home Workbench Woodworking Tool, 4.5 Inches, Blue

4.5 Inches Bench Vise Set: the package includes 1 piece blue bench vise and 2 pieces of magnetic vise pads, ready to install and use, no need to spend time looking for the right accessories.
Proper Size: machinist bench vise measures approx. 4.5 inches wide, opening size is up to 4.5 inches, magnetic vise pads measure about 4.5 inches long, matching size for simple operation and use.
Multi Functional Uses: our small bench vises are suitable for small parts processing and watch repair, such as woodworking, metalworking, sawing woodworking, drilling and bonding auxiliary installation.
The magnetic vise pad features a non slip design on the back, which is magnetic and difficult to separate when using.
Convenient to Use: the swivel vise is a lightweight tool that requires very little effort to get the job done and can be easily secured to the workbench for more convenience in your daily work.
Sturdy and Firm: the vice clamp adopts aluminum alloy material, and the magnetic vise pad is made of silicone and magnet, featuring a smooth surface and clear detail texture, which can apply for a long term use.

Check Stock

MYTEC Home Vise Clamp-On Vise，2.5

HOME VISE: Net weight 3.31 lbs, Maximum width of jaw opening 2.5 inch, Jaw width 2.0 inch.
EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..

Check Stock

MYTEC Home Vise Clamp-On Vise , 3.0"

HOME VISE: Net weight 3.62 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..

Check Stock

HIPOGT Table Vise Clamp Bench Vise Woodworking Vise with Anvil 360° Swivel Vice for Workbench Table Clamp Vise Grip, Cutting Conduit, Drilling, Metalworking

Table vise clamp : Aluminum body, Portable, vice for workbench quickly Clamps to surface.
360 Degree Swivel base allows rotating the vise for versatility.
Jaw opening: 2.16 in (55MM),vise stand, Non-slip textured surface increases the grip force of jaw, which firmly hold the material, save time and effort when you work.
Rubber on the jaws can be removed to reveal a cross pattern for use on wire/rods.
Ideal for Woodworking,Home Work Shop Vise, assembly,holding small parts in Jewelry, Model making, Electronics, general maintenance.

Check Stock