Best Surface mounted Light Covers

hykolity (6 Pack 2x4 FT LED Flat Panel Troffer Light, 50W Recessed Back-Lit Drop Ceiling Light, 0-10V Dimmable, 5000K 6500lm Lay in Fixture for Office, 3-Lamp F32T8 Fixture Replacement

  • HIGH PERFORMANCE: Smoothly dimming compatible with 0-10V dimmers (Dimmer Not Included). No flashing, No noise. Smooth PMMA cover with uniformity perfect light distribution..
  • ENERGY SAVING: Our 2x4 FT Back-lit LED flat panel light is an innovative alternative to 200W fluorescent tube fixture, which eliminates bulb replacement, buzzing, and wasted energy consumption over a rated lifespan of 50,000hrs. Saving up to 70% on your electric bill instantly..
  • EASY TO INSTALL: Drop ceiling panel light is designed with mounting clips on the sides and safety cable hole in each clip for easy and safety installation in standard grid ceiling and it can be surface mounted on the ceiling with optional mounting kit(Mounting Kit Not Included)..
  • WIDE APPLICATION: Our LED panel light fixtures are perfect for offices, schools, hospitality, retail store and other commercial applications..
  • 10-YEAR WARRANTY: Our LED flat panel troffer light is offered 10 years warranty against any defect in materials and workmanship, covers most damage and shipping costs for replacements. Contact us for any quality issues..
Check Stock

A-Team Performance - Fabricated Aluminum Valve Covers with Gasket Coil Mounts - Compatible with GM LSX Black

  • Fabricated Aluminum Valve Covers with Gasket Coil Mounts BLACK.
  • Compatible With — Chevrolet Small Block V8 Gen. III/IV (LS Based) - 4.8 L / 293 in3, 5.3 L / 325 in3, 5.7 L / 346 in3 (commonly referred to as 350), 6.0 L / 364 in3, 6.2 L / 376 in3, and 7.0 L / 427 in3.
  • Fabricated Aluminum — Valve Covers With a Clean and Unique Aesthetic Racing Look From Strong Yet Lightweight 6061-t6 Aluminum.
  • Tall Height — Added Clearance for High-performance Valvetrain Set-ups. Mounting Hardware — Complete Kit Which Includes Everything for Installation in LS Engine Covers.
  • Specifications — Center Bolt Mounting Style, Billet Aluminum Mounting Surface, and One-piece O-ring Gasket Included.
Check Stock

RT-TCZ Tail Light Guards Covers Brake Light Cover for Rear Taillights 2007-2017 Jeep Wrangler JK Unlimited Accessories (US Flag-1)

  • Durable Material:crafted from high quality metal.
  • Paint baking on surface and no rust, corrode or peel.
  • Easy to install and no need any drilling,enhance the Appearance & Style of your Vehicle. Protects Tail Light from damage..
  • Package included : A set of 2pcs of Tail Light Guards Covers (Includes mounting screws) + Third Brake Light Cover.
Check Stock

Hykolity (6 Pack) 2x2 FT LED Flat Panel Troffer Light, 40W Recessed Back-Lit Drop Ceiling Light, 0-10V Dimmable, 5000K 4600lm Lay in Fixture for Office, 2-Lamp T8 Fluorescent Replacement

  • HIGH PERFORMANCE: Smoothly dimming compatible with 0-10V dimmers. No flashing, No noise. Smooth PMMA cover with uniformity perfect light distribution..
  • ENERGY SAVING: Back-lit LED flat panel light is an innovative alternative to 200W fluorescent tube fixture, which eliminates bulb replacement, buzzing, and wasted energy consumption over a rated lifespan of 50,000hrs. Saving up to 80% on your electric bill instantly..
  • EASY TO INSTALL: Drop ceiling panel light is designed with mounting clips on the sides and safety cable hole in each clip for easy and safety installation in standard grid ceiling and it can be surface mounted on the ceiling with optional mounting kit(need to purchase separately)..
  • WIDE APPLICATION: Our LED panel light fixtures are perfect for offices, schools, hospitality, retail store and other commercial applications..
  • 10-YEAR WARRANTY: Our LED flat panel troffer light is offered 10 years warranty against any defect in materials and workmanship, covers most damage and shipping costs for replacements. Contact us for any quality.
Check Stock

NiteRider Omega 300 Lumens USB Rechargeable Bike Tail Light Powerful Daylight Visible Bicycle LED Rear Light Easy to Install Road Mountain City Commuting Adventure Cycling Safety Flash

  • ...ge in 2 hours 15 minutes. While plugged in, LED indicator will change from red to blue when it reaches a full charge..
  • LOW BATTERY INDICATOR upon powering off, indicator flashes blue notifying you that there is more than 20% battery level. And will light up red when below approx. 20% remaining..
  • LIMITED LIFETIME that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs..
  • FL1 STANDARD IP64 WATER AND DUST RESISTANT NiteRider taillights are engineered to withstand diverse riding conditions..
  • FAST / EASY TO INSTALL mounting, no tools required. Place seat post strap mount onto seat post, wrap durable strap around for a secure fitment. Seat Post Strap mount features angle adjustment capability, to fine tune light output direction..
  • allowing you to instantly remove the light from the mount, leaving the mount perfectly in place on the seat post and ready for the next ride. Ideal and very useful for when leaving/parking your bike..
  • COMPLETE REAR BIKE LIGHT SYSTEM comes with Daylight Visible 3-LED 300 lumen tail light with internal Li-Po battery, Seat Post Strap Mount and USB Charging Cable.
  • POWERFUL AND LIGHTWEIGHT AT ONLY 79 GRAMS, total weight includes tail light plus seat post strap mount.
Check Stock

YYST Clear Light saber Wall Mount Wall Rack Wall Holder - Hardware Included.

  • Patented Product for keeping lightsaber vertically displayed.Quantity : One clear blade holder , one wall mount clip. Hardware included..
  • Clear - Both the blade holder and the wall mount clip are clear. Does its job without being visually obtrusive. Before installing , Please peel off....
  • Easy to take in and take out - Put your light saber into the blade holder and push the tip into the wall mount clip..
  • Light Saber not included. 5 Pounds - the blade holder is very thick, which withstands up to 5 Pounds..
  • Screw Covers included - the screw covers are provided to hide your screws..
Check Stock

acegoo RV Boat LED Ceiling Light Surface Mount 12V Puck Light for Camper Van Travel Trailer Truck Car Interior Lighting 12 Volt Under Cabinet Kitchen Galley Downlight 4-Pack Small/Warm White

  • Slimline Design - Installation height only 1/2", this low profile puck light fits narrow places such as kitchen, cabinet, bookshelves, closet and RV....
  • Easy Installation - Surface mount is quite convenient and simple, only 2 screws are required. The bezel covers the mounting screws, very clean looking.
  • Energy Saving - LED is energy efficiency, it offer enough light with low power draw, these LED light fixture is great for RV boat interior lighting....
  • Lightweight - This light fixture is manufactured from full aluminum base LED board and strong PC shell. It is very lightweight, vibration resistance.
  • HINT: Lights are powered by DC 12V for RVs boat truck, etc application. If use for house, you need a DC12V power supply which converts AC 120v to DC....
Check Stock

RT-TCZ Metal Tail Light Guards Covers for Rear Taillights 1987-2006 Jeep Wrangler YJ TJ Accessories (TJ-US Flag)

  • Durable Material:crafted from High Quality Metal.
  • Paint baking on surface and no rust, corrode or peel.
  • Easy to install and no need any drilling,enhance the Appearance & Style of your Vehicle. Protects Tail Light from damage..
  • Package included : A set of 2pcs of Tail Light Guards Covers (Includes mounting screws).
Check Stock

YYST Clear Light Saber Wall Mount Wall Rack Wall Holder - 2 Pack

  • Patented Product for keeping lightsaber vertically displayed. Quantity : 2 clear blade holders , 2 wall mount clips. Hardware included..
  • Clear - Both the blade holder and the wall mount clip are clear. Does its job without being visually obtrusive. Before installing , Please peel off the white film of the acrylic , which protects the acrylic from scratches. Then you will see very clear acrylic..
  • Easy to take in and take out - Put your light saber into the blade holder and push the tip into the wall mount clip..
  • Light Saber not included. 5 Pounds - the blade holder is very thick, which withstands up to 5 Pounds..
  • Screw Covers included - the screw covers are provided to hide your screws..
Check Stock