Best Surface Pro Ssd Manufacturer

2Pcs m.2 Thermal pad， 70x20x2mm for Pcie M.2 2280 SSD NVMe Heatsinks M.2 Laptop Cooling

【Dimensions】- thermal pad fits for M.2 2280 SSD (22 x 80mm) Heatsinks..
【Nano Grease Material】- Made from unique Nano Silicon Grease Material, with good thermal conductivity ability..
【Soft and Low Viscosity】- Soft enough and good ductility, compatible with uneven surface of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label..
【 Wide Compatibility】- Item Size: 70 x 20 x2mm, Compatible : 850EVO / 860EVO / 960EVO / 970EVO / 950PRO / 960PRO / 970PRO / SM951 / SM961 / PM951 / PM961 / CM871a / PM871 / PM981 / XP941, no cutting required..
【Safe and easy to use】- Remove the protective films on both sides of the thermal pad and put it under the M.2 SSD Heatsink..

Check Stock

Aluminum M.2 2280 SSD Heatsinks with 20mm Fan Powerful Cooling for PCIE NVME or SATA M.2 SSD Cooler

➤ 【Designed for Desktop PC】- Specially designed for desktop computers, this M.2 SSD heatsink compatible with M.2 2280 SSD, perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc..
➤ 【New upgrade fan cooling】 – Aluminum alloy – Groove design with high performance fan, dual powerful cooling system, with 15 ° C – 40 ° C cooling effect (depending on the environment), Improve your computer performance, perfect for gamers.
➤ 【SATA power interface】- Fan use 15PIN SATA power interface, stable and simple, 5V working voltage, good versatility and easy to install..
➤ 【Easy to Install and Operate】 – With double-sided clip design, 6 adjustable height screws, suitable for M.2 SSD of various heights, stable installation, better protection of your M.2 SSD..
➤ 【Fine Workmanship】- Main body material: Aluminum alloy, silver plating (Helps eliminate static electricity), anodic oxidation surface treatment. Dimensions: 3 x 0.95 x 0.4in., net weight: 1oz., minimum installation height requirement: 12mm..

Check Stock

M.2 Heatsink Cooler 2280 SSD Double-Sided Heat Sink with Thermal Silicone pad for PS5/PC PCIE NVME M2 SSD(Black）)

【Designed for desktop PC/PS5】- Perfectly fit for Samsung 860 EVO, 960 EVO, 970 EVO, 970 Pro, 980 Pro, PS5 etc. this M.2 SSD heatsink compatible with all single sided Type..
【Main body material】- Aluminum alloy, silver plating (helps eliminate static electricity), anodic oxidation surface treatment. Dimensions: 3 x 0.95 x 0.4inm.2 heatsink well fit for PS5 installation as well as PC M.2 Slot..
【Thermal Pads】- with good thermal conductivity ability. Low viscosity, with no damage to the M.2 SSD..
【High Performance】- With 10°C - 20°C cooling effect (varies depending on the environments), cool your M.2 2280 SSD to a safe temp to avoid overheating and throttling, improve your computer's performance..
【Easy to Install 】 - With double-sided clip design, are suitable for M.2 NVME SSD of various heights, stable installation, better protection of your M.2 SSD with good heat dissipation performance..

Check Stock

M.2 PS5 SSD NVMe Heatsink for Samsung 980 Pro 970 EVO Plus SN570 SN750 SN850 Firecuda 530 NVME or SATA m2 2280 SSD Cooling Heatsink, Black

...install and better protect your M.2 SSD during disassembly and installation..
【Three Nano Thermal Pads】Advancing Gene thermal pad is made of a unique nano-silicone material, which makes it better in thermal conductivity. The thermal conductive pad is soft enough and well ductile to be compatible with both uneven surfaces of M.2 SSDs. The standard low viscosity will not damage the SSD warranty label..
【Small & Light-Weight】Aluminum alloy, silver plated (good for eliminating static electricity), anodized surface treatment. Size: 3 x 0.95 x 0.4 inches, net weight: 1oz. 12-months warranty and lifetime friendly customer service..

Check Stock

NVMe M.2 SSD Cooler Heatsinks with 20mm Fan Powerful Cooling…

Compatible with PCIe NGFF NVMe Key-M Key-B M.2 SSD Size: 0.87 x 3.15in. (22 x 80mm), fits for 850 EVO, 860 EVO, 960 EVO, 950 PRO, 960 PRO, etc..
20x20 FAN: 10000 rpm high-perfermance fan, low noise and no vibration, with 10°C - 30°C cooling effect (Varies depending on the environments).
5V Power Supply: 15PIN SATA Power interface, 1W power consumption..
Heatsink Design: Groove design, greatly increase the heat dissipation area. Aluminum alloy material, silver plating, anodic oxidation surface treatment. M.2 SSD Heatsink size: 0.94 x 2.95 x 0.24in. (24 x 75 x 6mm), net weight: 0.78oz / 22g. Thermal conductivity of the heatsink: 560W/mK, minimum installation height requirement: 10mm, ONLY FIT FOR DESKTOP.
Unique Nano silicone thermal pad. Soft and good ductility, compatible with uneven surfaces.
Low viscosity, no damage to the M.2 SSD warranty label..

Check Stock

JESOT NGFF M.2 NVMe SSD Convert Adapter Card for Upgrade MacBook Air 2013 2014 2015 2016 2017 and Mac Pro Retina 2013 2014 2015, NVMe AHCI SSD Upgraded Kit for A1465 A1466 A1398 A1502

... to upgrade your storage capacity, perfect for tech enthusiasts, high-end gamers, 4K & 3D content designers.
[Applicable SSD Hard Drive] - ONLY support PCIe NVMe based based M Key and B+M Key SSD (NVMe & AHCI), such as Adata NVMe SSD: SX6000, SX7000, SX8200, SX8200 Pro etc, Corsair : MP500, MP510, Crucial: P1, HP: ex920, ex950. Intel NVMe SSD: 600p, 660p, 760p, Toshiba XG3-XG4-XG5-XG5p-XG6 line, Samsung: 960 Evo, 960 Pro, 970 Evo, 970 Pro, WD: v1, v2 and v3, MyDigital: SBX - BPX. NOT support any SATA based SSD.
[Support System] - It is compatible with MacBook Air 11 “A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13 “ A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
[Please Note] - Require Mac OS 10.13 High Sierra or Later.
DO NOT compatible with earlier than Mac OS 10.13 versions.
DO NOT support Samsung 970 Evo Plus, PM981, 950 Pro. Please use your original SSD to upgrades your Mac OS before installation.

Check Stock

USB C 3.2 MacBook SSD Enclosure for 12+16 PIN MacBook Air/Pro SSD, Aluminum M.2 NVMe MacBook Pro Enclosure Adapter Support MacBook Pro,MacBook Air, Mac Pro, iMac from 2013 to 2017

⚡⚡【Designed for MacBook】USB 3.2 Gen 2 Apple ssd enclosure compatible with 12+16 PIN MacBook Air/Pro SSD, also compatible with Toshiba MacBook SSD/Toshiba MacBook SSD 656-0021A and OWC Macbook SSD, compatible with 2013/2014/2015/2016/2017 MacBook Air Retina/Macbook Pro/IMac, equipped with adapter to support M.2 NVMe SSDs..
⚡⚡【Extremely Fast Data Transfer】Macbook pro ssd enclosure is equipped with USB 3.2 Gen 2 interface, the average transmission speed is 10Gbps, USB 3.2 Gen 2 nvme ssd enclosure can also reach 20Gbps through USB 3.2 Gen2x2, which is very suitable for transmitting large files, and it only takes a few seconds to complete large files. save and transfer..
⚡⚡【Advanced Heat Dissipation Technology】Macbook ssd enclosure adopts aluminum alloy design, which has better thermal conductivity than traditional ABS material. At the same time, the shell is designed in a fish scale shape, which expands the thermal conduction area, improves the thermal conduction effect, and is easier to hold..
⚡⚡【Compatible Systems】USB 3.2 Gen 2 Macbook air ssd enclosure is compatible with Windows7/8/10/11, Mac OS 10.0, Linux 2.6 or later. Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro..

Check Stock

Dell 1410X Value Series Projector

Dell Latitude 7420 14" Business Laptop | Dell Certified Refurbished | 3-Year Manufacturer Warranty through Dell including Pro Support.
Intel Core 11th Generation i5-1145G7 Processor (Quad Core, Up to 4.40GHz, 8MB Cache) | 256GB PCIe SSD | 16GB DDR4 RAM.
14 inch FHD (1920 x 1080) Wide View Angle Anti-Glare 300-nits Touch Display, WLAN Capable (Carbon Fiber) | IR Camera | Fingerprint Reader.
4-Cell, 63 WHr Battery (Express Charge Capable) | 65 Watt Type-C AC Adapter | Windows 11 Pro | Intel Wi-Fi 6 AX201 2x2 802.11ax 160MHz + Bluetooth 5.2.
1 USB 3.2 Gen 1 port with PowerShare 2 Thunderbolt 4 ports with DisplayPort Alt Mode/USB4/Power Delivery 1 Universal audio port 1 HDMI 2.0 port.

Check Stock

JEYI Copper M.2 HeatSink, Passive Nvme SSD Heatsinks with Copper Fins - Finscold Q80

Heavy-duty copper heat sink with 36 built-in copper fins, thermal conductivity 401 (W/m.K), surface area 20 times larger than ordinary M.2 heat sinks..
Full CNC cutting aluminum frame for good appearance and solid construction,.
Equipped with 3 soft thermal pads to improve thermal conductivity and adjustable screw fixing holes to prevent the chip of SSD from being damaged.
Perfect fit for M.2 2280mm SSD, especially for SAMSUNG PCIE 4.0 980Pro and EVO 970Pro Which has very high heat generation.
Note: The height is 12mm/0.45" and supports mounting under the graphics card, But still please double check before you buy it ".

Check Stock