Best Surface Plate Inspection

iBetter 2 PCS Thick Carbon Fiber License Plate Frames, Car Licence Plate Holder Covers with Bolts, Washers and Screw Caps for US Standard (2 Holes Wide Carbon Fiber)

...tional hardware. The stainless steel license plate screw are suitable for the license plate mount of most models. The carbon license plate screw caps perfectly decorate the carbon fiber frame. GIFT-The aluminum Tire Valve Caps easy to stick to your tire valve nozzle.Please be sure to unscrew the Tire Valve Caps for inspection within 1-2 months to avoid losses!.
License Plate Rust Proof /Rattle Proof- The frame is made of high-quality aluminum, the screws bolts and fastener nuts are made of stainless steel. They are anti corrosion and anti rust, and can well protect the license plate. The black foam rattle proof license plate pads are pasted on the back of the plate to reduce vibration noise and avoid scratching the paint of the car, so that your car is always clean, novel and cool. The black tire valve cap are good car accessories.
Note: The width of the upper and bottom edges is 28mm. Please measure your license plate to check whether the frame edges will obscure your plate tags, if your plate is for the following states: Alabama, Colorado, Georgia, Hawaii, Idaho, Kentucky , Minnesota, Nevada, North Dakota, New York, New Mexico, New Jersey, New Hampshire, Ohio, Oklahoma, Oregon, South Carolina, Wisconsin. If the screw size does not fit your car, pleas....

Check Stock

Lightening Corp Baby Plate Silicone Toddler Plates Suction Placemat Divided Dishes for Kids and Infants One-Piece Strong Suction, BPA Free, Microwave Dishwasher Safe (Grey)

...ing a mess on the floor or dropping their plates.
Durable - Silicone does not warp or damage and can withstand both hot and cold temperatures. It is also resistant to age, sunlight, moisture and chemicals.
Warning - It is normal for silicone products to contain odors. Our products are safe and non-toxic after quality inspection. Expose the plate to the air for 2-3 days and the smell will naturally dissipate.

Check Stock

BGMVFK Carbon Fiber License Plate Frame- 2 Pack Black Aluminum Front & Rear Auto Car Tag Holder Cover, Heavy Duty Bracket with Mount Hardware, Stainless Steel Screws, Caps, Rattle Proof Pads

...tional hardware. The stainless steel license plate screw are suitable for the license plate mount of most models. The carbon license plate screw caps perfectly decorate the carbon fiber frame. GIFT-The aluminum Tire Valve Caps easy to stick to your tire valve nozzle.Please be sure to unscrew the Tire Valve Caps for inspection within 1-2 months to avoid losses!.
License Plate Rust Proof /Rattle Proof- The frame is made of high-quality aluminum, the screws bolts and fastener nuts are made of stainless steel. They are anti corrosion and anti rust, and can well protect the license plate. The black foam rattle proof license plate pads are pasted on the back of the plate to reduce vibration noise and avoid scratching the paint of the car, so that your car is always clean, novel and cool. The black tire valve cap are good car accessories.
Note: The width of the upper and bottom edges is 28mm. Please measure your license plate to check whether the frame edges will obscure your plate tags, if your plate is for the following states: Alabama, Colorado, Georgia, Hawaii, Idaho, Kentucky , Minnesota, Nevada, North Dakota, New York, New Mexico, New Jersey, New Hampshire, Ohio, Oklahoma, Oregon, South Carolina, Wisconsin. If the screw size does not fit your car, pleas....

Check Stock

iLEEYU Automatic Door Closer, Safety Spring Door Closers - Easy to Install to Convert Hinged Doors to Self-Closing – Diecast Construction-White

◀Keep Quiet and Safe - Automatic closing and latching, maintaining quiet and security. During the break, you don’t have to worry about your kids escaping from home or your pet dogs, cats running into your room..
◀ EASY DIY PROJECT : Thanks to these iLEEYU safety spring door closers, your next to-do is quick and easy. Use these door closers to convert hinged doors to self-closing ones..
◀ EASY INSTALLATION : With a closer and plastic slide plate being surface mounted, installation is a breeze.(And there is a detailed installation manual in the box to ensure that there is no problem with the installation).This spring door closer can be used on doors up to 150 lbs and can be used on both left and right-handed doors..
◀HIGH QUALITY : Antioxidative, anticorrosive, weatherproof, steady, abrasion resistant, quiet and safe closer. Quality Warranty: Over 500,000 times open and close testing, at least 72 hours salt spray corrosion test, 100% inspection..
◀Includes - Surface mounted spring-loaded door closer with instruction, tension rod, sliding plate and hole plugs to cover adjustment holes in closer body after the required tension is set..

Check Stock

FHelectronic 6-Inch Marine Deck Plate Round Non-Slip Boat Cabin Vents Hatch Screw-in Deck Plate with Removable Cover ABS Plastic Deck Fittings (Black)

This inspection hatch is made of ABS plastic which has further resistance to sun, water and salt.
Made of ABS plastic, anti-aging, anti-corrosive, ultraviolet resistant.
Maintains an attractive clean surface for low maintenance costs for discerning yacht drivers.
Designed with a non-skid surface Heavy Duty Lid allowing horizontal as well as vertical mounting.
Separate cover plate and chassis, very easy to install,with pre-drilled countersunk fastening holes (White includes 6 pieces of screws, black no！！).

Check Stock

ZUZUAN 1PACK Wire Gauge Double-Sided Laser Calibration 0-36 American Standard & 1PACK Thickness Gauge， Stainless Steel with Clear Calibration

...ust and can not see the scale, easy to store in a dry environment, can be used for a long time, do not need to be frequently replaced..
✔【Widely Used】Used in measuring uncoated steel, leather, paper, wood, bolts, etc..
Welding wire/sheet metal thickness welding specification, welding wire/sheet metal dimension inspection before welding or processing packaging stainless steel welding specification, metal welding specification electroplating dimension inspection tool..
✔【 Compact and Exquisite】Small size, light weight,bring their own bags, easy to carry，you can bring it to anywhere you want to ..

Check Stock

MARINE BOAT WHITE PLASTIC DECK PLATE 4

This is a high quality waterproof inspection Deck plate made of UV stabilized plastic..
Opening Diameter: 4" Overall Diameter: 5.8" Distance between two opposite screw holes: 5".
The recommended screws for this deck plate is P20004-01..

Check Stock

75x25x36 AP30 Stainless Steel Angle Gauge Precision Micro Block Milling Adjustable Angle V Block Milling

【PREMIUM STAINLESS STEEL】Our angle v block milling is made of high-quality stainless steel. This angle gauge has the advantages of surface hardening and durability.
【NICKEL PLATED WORKING FACE】We carry out nickel plating treatment on the working surface of each degree angle plate angle, and the parallelism and perpendicularity of the rust removal of this adjustable angle v block are finely ground to 0.01mm.
【FIXED ANGLE PROCESSING】This precision gauge can use the cursor to indicate the stepless tilt adjustment angle, and then fix it with screws to make various fixed angle processing and inspection workpieces.
【ANGLE V BLOCK】The corner V-shaped block has the characteristics of high precision and easy operation. This micro v block milling can meet your various work needs.
【WIDELY USED】This high precision angle gauge uses adjustable angle grinders and adjustable blades on milling machines, planers, and drilling machines. After the workpiece is processed, this stainless steel block milling crosses or clamps the workpiece with other fixtures, such as processing inclined planes, inclined hole drilling, etc.

Check Stock

12.4 GE Microwave Glass Plate Microwave Glass Turntable Plate Replacement 12 1/25 Plate Equivalent to G.E WB39X10002 WB39X10003

Ideal Replacement For Many Models: Our microwave glass plate is an ideal replacement for an array of GE / G.E. (TM) models requiring 12.4 inch....
Easy To Install: Check your bushing coupler (the centerpiece that turns the plate) and ensure it has three notches, align w/ the middle of the plate.....
High Quality & Durable: Microwave Glass Plate is made of food grade toughened glass, not easy to break, durable and high temperature resistant for....
Professional Manufacture: Professional factory development, microwave glass turntable plate from molding, stamping to assembly, inspection of each....
Compatible with A Variety of Makes And Models of Small Microwaves: Compatible most Microwaves glass plates is 12.4 inch.

Check Stock