Best Sump Pump Battery Backup

B BURCAM QUALITY PUMPS SINCE 1978 300828BUPZ 1/3HP Cast Iron Sump Pump With 12 Volts Battery Backup System

SUMP PUMP: 1/3 Pro Series cast iron sump pump preassembled with 12 volts battery back up for maximum protection..
EMERGENCY BACK UP PUMP: Helps reduce the risk and costly repairs in case of power outage or primary sump pump failure..
PERFORMANCE: Sump pump moves up to 3050 gph with a maximum lift of 18 feet. The 12 volts backup operation moves up to 16 gph and can lift water up to 10 feet..
FAST AND EASY INSTALLATION: The system comes preassembled for fast and easy installation..

Compatible with the Basement Watchdog Emergency (BWE) battery backup sump pump system or Basement Watchdog Combination primary and battery backup sump....
Pumps intermittently for days on the Basement Watchdog Emergency (BWE) or Combination (DFK961) system.
Accommodates the Basement Watchdog fluid sensor to sound an alarm when distilled water is needed.
Shipped dry to remain fresh until activated.
Can be easily and safely filled with a 6 qt. battery fluid pack (sold separately Model # Z-PACK).

Primary pump-pumps up to 4200 gallons per hour, pumps water up to 25 vertical feet.
Pre-assembled kit: Primary pump model 92511 cast iron sump pump and 12V DC backup pump.
Kit includes 87 decibel alarm, electronic control panel with indicator lights, battery box, mounting hardware, 2 AMP DC charger (12 volt deep cycle battery not included).
Vertical float switch on primary and backup pumps.

Automatically switches over to battery power when AC power goes out. The PumpSpy 75 Ah Deep Cycle AGM Battery (not included) is recommended.
Generates a Pure Sine Wave 120 VAC voltage to reliably power your primary sump pump.
Automatically recharges a battery When AC Power is restored with a powerful 10 Amp built-in charger.
1500 Watt output is enough to power two primary sump pumps simultaneously (with a combined Amp draw not exceeding 12.5).
Can be used as a power inverter for many applications requiring backup power.

EASY INSTALLATION: Installing a backup sump pump can be tedious but not with the PumpSpy Dual Pump Install kit! This kit comes with everything you need to connect 2 sump pumps together to a single discharge line. All you’ll need for the process is a standard screwdriver. Install your pumps in a fraction of the time..
IDEAL SAFEGUARD SYSTEM: A flooded basement can cost thousands of dollars in damages. The best way to protect yourself from this kind of disaster is with a backup sump pump. This dual water pump installation kit makes it easier for you to install a backup system to avoid what could potentially be a major inconvenience..
HASSLE-FREE SET UP: There’s no cutting or gluing required during installation with this dual pump backup installer kit. Everything you need to connect a back up sump pump is in the box. There’s no need to purchase a PVC pipe, elbows, couplings and cement. Say goodbye to messy, laborious installations!.
WHAT’S IN THE BOX: This kit contains a Y-Connector, Two (2) 1-1/2″ Threaded Silent Check Valves, Stainless Steel Clamps and Buna-N Rubber Couplings. The only thing you’ll need to put everything together is a standard screwdriver. This kit is compatible with all pumps that have a standard 1-1/2″ NPT pump discharge/....

Replacement AC Adapter/Charger ,100% Compatible with the device model listed..
Compatible with: FUTURE RETRO REVOLUTION.
JAMECO RELIAPRO ADU120160H4120 ADU120150E1012.
Sangean WR-5 FM-RDS Table-Top Radio with iPod Dock.
Relaxor Model: APC542201 P/N: 50283 PRO SERIES Class 2 Transformer.
Bose Lifestyle Model 20 50 40 25 LS-20 LS-25 LS-30 LS20 LS25 LS30 Music Center Console 12VAC 1.5A - 1.6A - 2A Power Supply (NOT 12VDC).
Compatible with: The Basement Watchdog Special + Connect, with BWSP-A Backup Controller Battery Backup Sump Pump System.
New 12V AC / AC Adapter Compatible with The Basement Watchdog BW Model: AC1201600-1 AC12016001 Part Number PARTNO. 1015001 Design No.: SSA-0990-00, BWSP1730 BWSP 1730 Gallons Per Hour Base ment Watch dog Special Sump Pump 12VAC 1600mA AC12V 1.6A - 2A Bulldog Battery Back Up 12.0V 12 VAC Class 2 Transformer Power Supply Cord Cable Battery Charger Mains PSU (w/ Barrel Round Plug Tip. NOT 2-Prong Connector. Please Check For Compatibility With Your Unit. Thanks.).

BACK-UP SUMP PUMP: Emergency water back-up system that operates without a battery or power to protect your home from flooding in case of power failure or pump failure..
EMERGENCY PUMP: It does not require electricity or a battery to function, but is powered by your municipal water supply. It is easily connected to the municipal water supply line and to your existing conventional sump pump discharge line..
EASY INSTALLATION: No electricity, no battery, no maintenance required..
POWER OUTAGE PEACE OF MIND: In the event of a power outage or an electric pump failure, the rising water in the sump will activate an automatic control valve which will start the system. Water under pressure will flow through the Contractor Sump Buddy which creates a vacuum and causes the water in the sump to be drawn out into the discharge line..
HEAVY DUTY BRASS CONSTRUCTION: The pump and valve are made of brass for strength and longevity..
PUMP PERFORMANCE: The maximum lift is 15 feet and the moves up to 1200 GPH..

Pre-assembled system allowing for easy installation with little or no plumbing knowledge necessary.
1/3 HP energy efficient permanent split capacitor (PSC) primary pump can save money on your electric bills.
Primary pump capacity 3,100 GPH at a 10 ft. lift and 3,720 GPH at 0 ft. lift.
Backup system capacity 1,000 GPH at 10 ft. lift and 2,000 GPH at 0 ft. lift.
Includes emergency battery backup sump pump system with 24 hour a day monitoring controller.