Best Suction Fittings

Seaworks Boat Winterizer Gravity Motor Cleaner with Flusher Kit - Gravity Flow System DIY Winter Preparation Solution for Marine Engines - For Inboard and Outboard Engines

  • Seaworks Boat Winterizer flow system flushes, prepares and protects your boat engine for winter storage. Compatible for inboard and outboard engines. Flusher included with kit..
  • Kit includes: antifreeze tank with on/off valve, T-Connector, shutoff valve, braided hose with fittings, flusher..
  • Fittings designed for uninterrupted antifreeze flow to your engines, cleans impurities and enhances engine performance. Use at regular intervals to improve engine life expectancy..
  • Antifreeze(not included) and flusher (included) required to operate kit, 5-gallons of compatible antifreeze required for boat winterization. Do not use an antifreeze with a burst protection level of less than -50°F..
  • For front engine mounted raw water pumps (including most Volvos and inboards) a Front Engine Pump adapter (not included) is needed to connect directly to the suction side of the raw water pump. Do not attempt to to connect directly to the suction side of the raw water pump. Do not attempt to winterize a front engine mounted raw water pump system using this method..
Check Stock

Baracuda R0527700 MX8 Cleaner Hose for Pool Cleaner (Fоur Paсk)

  • This listing includes everything needed to get started today ~ New G3 Cleaner For In-Ground Pools, 36 Feet of Hose and an additional Diaphragm and additional finned disc..
  • works with low-speed pumps for maximum efficiency. Durable Long-Life Diaphragm with reliable, one-moving-part-technology.
  • FlowKeeper Valve automatically regulates water flow to maintain peak cleaning performance even with lower horsepower pumps. Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces..
  • 36-Fin Disc increases adhesion to pool surface and avoids getting hung-up on lights, drains covers, fittings and other pool features..
  • The Zodiac G3 In-Ground Suction Pool Cleaner is a quiet and powerful suction cleaner that works with low-speed pumps to clean with maximum efficiency..
Check Stock

Intex 28005E ZX300 Deluxe Automatic Pool Cleaner, Grey

  • KEEPS YOUR POOL CLEAN: Powerful 700 gal/hour water powered suction.
  • ALL-WHEEL DRIVE: Water powered all-wheel drive for swift cleaning action and superior wall-climbing performance.
  • REQUIRED PUMP: Intex pump with a flow rate between 1,600-3,500 gal/hour required.
  • DUAL SCRUBBERS: Rotating dual dirt scrubbers for cleaning even the finest and hard to remove dirt up to the water line.
  • DEBRIS FILTERING: Fine 6ga (0.15mm) mesh filter for capturing even the finest debris. 0.48gal large capacity debris container. 21ft 4in non-tangle hose.
  • PRESSURE SIDE OPERATION: Hooks up to the inlet for water coming back into the pool and uses the water pressure (not suction) to operate.
  • For use with Intex above ground pools with PVC liners and 1.5in threaded inlet fittings ONLY.
  • Not suitable for Intex Easy Set Pools or pools with inflatable top ring.
Check Stock

ZZHXSM Plastic 10 Pcs Standard Couplers Cake Decorating Pipe Tip Couplers for Icing Nozzles, White

  • Packing: 10 cake decoration couplers, enough to meet different purposes, you can change the test tube of similar size without emptying the contents in the decoration bag.
  • Standard fittings: These white fittings are 3 cm / 1.2 inches long and have a base diameter of 2.5 cm / 1 inch, suitable for standard size icing nozzles.
  • Available range: The standard coupler is suitable for all decorative bags and standard size tips, which can help you replace pipe tips without unnecessary waste.
  • Simple and easy to use: cut a small hole in the corner of the bag, insert the plastic coupler, and then fix the suction head and screws on the ring. After completion, remove the tip and coupler and clean them.
  • Durable and practical: The tube head connector is made of high-quality plastic and has a sturdy structure that allows you to decorate cakes and biscuits quickly and easily.
Check Stock

Kitty Cot Original World's Best Cat Perch (Deluxe)

  • Kitty Cot Original (Deluxe) PATENTED Giant Suction Cups.
  • CLOSE Your BLINDS & SHADES without Removing from Window - Heavy duty corners.
  • Safely holds easy 25 pounds of Cat(s) - Simple to Install & Absolutely No Tools Needed.
  • Made with "TIGER MESH" a Super Tough & Rugged, Waterproof Stain Resistant Nylon Fabric.
  • Steel Frame & Wires - NO PVC PIPE or FITTINGS.
Check Stock

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Meter 1/4" Fittings Can Tap Quick Coupler Adapter, 42" Long

  • AC U CHARGE HOSE: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly..
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge..
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass R134A self-piercing can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of refrigerant bottle opening. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. There is also a 1/4" male ....
Check Stock

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Measuring Meter 1/4" Fittings Can Tap Quick Coupler, 42" Long

  • AC U CHARGE HOSE: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly.
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge. (NOTE: Use valve core tool to unscrew the valve core thimble a little bit if the hose angled connector would not depress the Schrader valve).
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of piercing type re....
Check Stock

OEMTOOLS 87201 Lever Action Grease Gun, Manual Grease Gun, Auto Grease Gun, High Pressure Grease Gun, Grease Gun Coupler, 6 Inch Grease Gun Syringe

  • MAKE GREASING EASY: Our grease pump features a lever action handle for greasing.
  • The steel extension and hydraulic grease gun coupler make tight spaces accessible.
  • Multiple filling options include suction, filler, and grease gun cartridge loading.
  • MAINTAIN EFFICIENTLY: The lever grease gun delivers a maximum pressure of 7000 PSI ensuring that your greasing job gets done quickly.
  • Use our cordless grease gun's hydraulic coupler to grease suspensions, ball joints, and more.
  • STURDY DESIGN: Our hand grease gun comes with a cast iron pump head to withstand the maximum 7000 PSI output of the grease gun pump and prevent leaks.
  • The cast iron head ensures that the automotive grease goes into the zerk grease gun fittings.
  • EASY HANDLING: The heavy duty grease gun's spring pump dispenses marine grease and effectively operates during suction filling.
  • The grease gun lever action handle is easy to use.
  • Added grip and slip resistance is provided by the knurled barrel.
  • SPECIFICATIONS: Our grease guns feature a 14 inch barrel with a knurled grip.
  • A cast iron head keeps leaks from occurring during high pressure grease pumping.
  • The small grease gun kit is filled using a 14oz grease gun cartridge, suction, or a filler.
Check Stock

SongLong Submersible Pump 400GPH Ultra Quiet with Dry Burning Protection 6.5ft High Lift for Fountains, Hydroponics, Ponds, Aquariums & More……

  • 【High Quality】Ultra-quiet design and stainless steel makes pump working quiet and long life..
  • 【Water Flow Control】The adjustable knob can contorl the flow rate,you can get the amount of water pressure you want. Max flow 400GPH, High Lift 6.5ft..
  • 【SUCTION CUP and 6Ft POWER CORD】Long enough cord for easy installation. 4 strong suction cups at the bottom of the pump help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally.
  • 【3 NOZZLES】SongLong water pump comes with 3Nozzles,0.51in,0.62in,0.75in, Provide a different water flow as you need. Threaded fittings make it more stable. Detachable and cleanable..
  • 【Detachable & CLEANABLE】 No need any tools to detach it, easy to seperate, easy to clean..
Check Stock