Best Structural Steel Workshop

Heavy Duty 75" Rotary Tiller 3 Point Rototiller Tractor Tiller Attachment PTO Tiller Cultivator C Blade

  • 【A DECK MATERIAL】:Shaped and formed 5/32"16"8gauge. Heavyformed Q-235 (American standard ASTM A-36) structural steel plate. Forming allows for additional strength and rigidity..
  • 【SIDE PLATE MATERIAL】:5/16",32".heavy-235(American standard ASTM a-36) structural steel plate.
  • think steel to ensure the structural integrity of the unit during heavy use..
  • 【HITCH TYPE】:Standard3-pointhitch14.Orcategory1quick hitch. Clevis-type lower hitch makes attaching to your tractor a breeze..
  • 【ROTOR SHAFT SPEED】:540RPM PTOinputspeed=210RPM rotor shaft speed. The rotor speed is matched with the number of times to reach the ideal torque required to tear through the earth..
  • 【BLADE TYPE】:Self-sharpening C-shaped.Compared to L-shaped the shape is more efficient and requires less HP todigintothesoilThegradual C-shape is stronger than the sharp bend of the L-shaped blades..
Check Stock

Lenox - 29232CLB72360 Classic Tuff Tooth Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 18 TPI

  • Tuff tooth design reduces tooth strippage.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • Wavy tooth set helps prevent stripping for cutting thin workpieces.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
Check Stock

Lenox Classic Tuff Tooth Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 186\ Length, 3/4\ Width, 0.035\ Thick, 3 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, tubular shapes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Raker set for general-purpose cutting applications.
Check Stock

3M Panel Bonding Adhesive, 38315, 50 mL Cartridge

  • Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass).
  • A high performance two component epoxy adhesive..
  • Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components..
  • Also use to reinforce welded or riveted structural components..
  • Use with 08190 Performance Manual Applicator and 38191 Static Mixing Nozzle. The Net Fill amount is 47.5mL. Cartridge Volume is 50mL.
Check Stock

25 pcs M16-2.0 X 105mm DIN 6914 / ISO 7412 / EN 14399-4 Metric Heavy Structural Hex Bolts Class 10.9 Steel Galvanized

  • Heavy hex structural bolts are designed to withstand the load of a steel-to-steel connection..
  • Commonly used in structural steel joint in construction and building applications..
  • Class 10.9 steel is an alloy steel, quenched and tempered, with a minimum tensile strength of 1,040/mm-2 (Mpa)..
  • The washer face under the head provides a precision bearing surface..
  • The chamfered point improves engagement with a nut or pre-tapped hole..
Check Stock

Lenox Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93.5" Length, 1/2" Width, 0.025" Thick, 14-18 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Wavy set helps prevent stripping for cutting thin workpieces.
Check Stock

Lenox - 76123D2B51638 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 18 TPI

  • Regular tooth design for general-purpose cutting.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
  • Flexible back is suitable for contoured cuts.
Check Stock

Lenox - 72100CLB72360 Classic Tuff Tooth Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 8-12 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Vari-raker tooth set for multipurpose cutting applications.
Check Stock

Lenox - 80209D2B72390 Diemaster 2 Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 94\ Length, 1/2\ Width, 0.025\ Thick, 14 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
Check Stock