Best Stronger X y Axis Rails

【SINIT-TTL Current Analog Tilt Switch】High-Stability Dual-axis Analog (4-20mA,±90 Degrees) Security Inclinometer, Anti-Vibration Tilt Angle Sensor (IP67 Waterproof) for Constructions Monitoring

【 Current-type Analog Inclinometer 】Dual-Axis Inclination Measuring: X-axis & Y-axis ( +-90 degree), Dual Axis Analog 4-20mA Current Data Output.
【 Robust Design 】 Cortex-M0 core processor, highly-integrated MEMS, and Kalman Algorithm combine to deliver measurement accuracy at 0.1 degree(X, Y-axis) even in the dynamic environment, professional for industrial safety monitoring system.
【 WITMOTION Advantage 】8-year Professional Attitude Measuring Solution Provider, sensors integrated R&D dynamic fusion algorithm and Kalman Filtering ensuring stable data output and excellent bias stability, low noise level, increasing measurement accuracy.
【 Worry-free Support 】12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the guiding card inside the package. Option 2. search wit-motion(dot)com and download the complete tutorial. Option 3. contact us if you need any help, support (at) wit-motion (dot) com.
【 What You Get 】1 x WitMotion SINIT inclinometer(9-36V TTL version) + 1 x Welcome guide (USB-UART converter not included ).

Check Stock

【SINVT Voltage-Output-Type Tilt Switch】High-Stability Dual-axis Analog (0-5V, 0.05° Accuracy) Secury Inclinometer, Anti-Vibration Tilt Angle Sensor (IP67 Approved) for Building/Bridge Monitoring

【 Voltage-type Analog Inclinometer 】Dual-Axis Inclination Measuring: X-axis & Y-axis ( +-90 degree), Dual Axis Analog 0-5V Voltage Data Output.
【 Robust Design 】 Cortex-M0 core processor, highly-integrated MEMS sensor, and Kalman Algorithm combine to deliver measurement accuracy at 0.1 degree(X, Y-axis) even in the dynamic environment, professional for industrial safety monitoring system.
【 WITMOTION Advantage 】8-year Professional Attitude Measuring Solution Provider, sensors integrated R&D dynamic fusion algorithm and Kalman Filtering ensuring stable data output and excellent bias stability, low noise level, increasing measurement accuracy.
【 Worry-free Support 】12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the guiding card inside the package. Option 2. search wit-motion(dot)com and download the complete tutorial. Option 3. contact us if you need any help, support (at) wit-motion (dot) com.
【 What You Get 】1 x WitMotion SINVT inclinometer(9-36V TTL version) + 1 x Welcome guide (USB-UART converter not included ).

Check Stock

Arduino Uno Nano 4 Axis Stepper Control CNC Mill G-Code Translator A4988 Compatible Easy to Use and Friendly Software

Runs on almost any PC which has : WIN 10, 8, 7, XP, Millenium, NT 2K, 98. Low PC CPU loading, that do not hang or overload your PC, so you can use....
Load your g-code and start machining. Easy straight forward operation. Quick configuration for many cnc type. Simple configuration for custom cnc..
When powering down record position of cnc x,y,z,w.
so it does not loose cnc machine position at start up. Integrated firmware to easily program....
Hints to help and guide during operation plus tutorial videos all embedded in the software. Up to 16 khz operation for precise stepper motor motion..
Jogging on all 4 axis x, y, z, w. 4th axis (w) can be geared to x or y (via g-code) to create surface of revolution. Emergency shutdown for safe....

Check Stock

ARCELI 5PCS PS2 Joystick Game Controller XY Dual-axis Joystick Breakout Module Compatible with Arduino

PS2 game joystick axis sensor module consists of using original quality metal PS2 joystick potentiometer system For the (X, Y) a 2-axis analog output and for (Z) 1 digital output channel button..
Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin..
This joystick module can be easily connect to Arduino by normal IO Expansion Shield with supplied cables..

Check Stock

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
Input voltage: 12-24VDC .CNC Router Machine Controller board.
Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
support 775 motor, 200W/300W/500W spindle.
support dual Y-axis use, three-axis and two-axis switching use.
support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..

Check Stock

CH Products Pro Pedals USB Flight Simulator Pedals (300-111)

3 Axis of Control: X & Y axis for left and right toe brake control and Z axis for self centering sliding mechanism for rudder control.
Realistic heel-toe differential brake control and Large, sturdy base with 7 foot USB cable.
Locking rudder axis for gas/brake emulation for racing games. It is only compatible with CH USB devices.
Plug and Play driverless USB installation for both PC and Macintosh.
Compatible with Windows 98, 2000, XP, Vista, 7, 8, 10 and Mac OSX.

Check Stock

LulzBot KT-PR0051NA TAZ Workhorse 3D Printer

Belt driven Z-axis for fast cycle times and elimination of Z wobble..
X/Y/Z Backlash Compensation* for 3D printed part accuracy..
Lightweight tool head design for faster, better looking prints.
Pre-configured material profiles created by expert in-house technicians..
Dual Z-axis limit switches for automatic x-axis gantry leveling.
The industry’s widest array of supported materials with ready-to-print profiles.

Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
Input voltage: 12-24VDC .CNC Router Machine Controller board.
Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
support 775 motor, 200W/300W/500W spindle.
support dual Y-axis use, three-axis and two-axis switching use.
support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..

Check Stock

Carmyra Portable Chainsaw Mill 36 Inches Planking Milling Bar Size 14 Inches to 36 Inches

...ng machine worktable consists of the table and the base. The table is made of high-quality aluminum alloy, which is sturdy, durable, and with a finely polished surface. With a green coating, the cast iron base is anti-rust and corrosion-resistant..
PRECISE & PRACTICAL - With 3 T grooves, the travel distance of the X axis is 200mm/ 8inches, the Y axis is 50mm/ 2inches. The hand wheel is on each side of the multifunction worktable. You can adjust the hand wheels to precisely control the travel distance in both directions. The laser-etched metric scale is on each hand wheel ensures the precision..
ADJUSTABLE LOCK-NUT - There are six pieces of adjustable lock-nuts on the base of the milling working table. 3 pieces on the X-axis and 3 on the Y-axis. You can slightly tighten the lock nuts if they get loosen on the table..
WIDE USAGE - The work table is designed to work with bench drills. It fits mini drills and electric drill brackets and is a good choice for DIY models. High quality structure can last for years of use..
SATISFACTION GUARANTEE - We promise to offer you a satisfying shopping experience with a refund guarantee within 30 days. If you have any dissatisfaction with our mill machines, please feel free to contact us. We’ll try our best to help you....

Check Stock