Best Stroke Oil Injection System

Diesel Motor Engine,3.6Kw 4 Stroke Single Cylinder Air Cooled Vertical Engine,Heavy Duty Diesel Motor Engine for Road Cutting Machine,Grinding Machine

【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..

Check Stock

Universal Cylinder Liner Puller Heavy Duty Diesel Engine Cylinder Liner Puller Fits for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” Bore, Replace for OEM PT-6400-C M50010-B 3376015

【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..

Check Stock

DEREAL Pro 62cc Gas Chainsaws 2-Cycle Gasoline Powered Chain Saws Handheld Cordless Petrol Chainsaws Optional 20 Inches Guide Board Power Chain Saws for Trees Wood Farm Garden Ranch Forest Cutting

♧[Safe and Reliable Structural Design]:DEREAL gas chainsaw is equipped with dual throttle switches, which need to be pressed by you at the same time....
♧[2-Stroke Cycle Engine]: DEREAL gas chainsaw uses the latest two-stroke cycle engine, which is high efficiency, high power, reliable work, and long....
♧[Professional Gas Saw Chain]：Saw chain is an important part of forest cutting saws, and its performance affects the efficiency of sawing, fuel....
♧[Automatic oil injection lubrication] : The automatic oil supply system can automatically spray oil for lubrication during the operation of the....
♧[Easy Purchase Decision]: DEREAL Gas Chainsaw has the advantages of high power, high efficiency, small size and light weight. Besides, DEREAL PRO....

Check Stock

DEREAL 58cc-Gas-Chainsaw 2 Cycle Gasoline Powered Chain Saws Handheld Cordless Petrol Chainsaws Optional 16-Inches Guide Board Power Chain Saws for Trees Wood Farm Garden Ranch Forest Cutting

[Safe and Reliable Structural Design]:DEREAL gas chainsaw is equipped with dual throttle switches, which need to be pressed by you at the same time to....
[2-Stroke Cycle Engine]: DEREAL gas chainsaw uses the latest two-stroke cycle engine, which is high efficiency, high power, reliable work, and long....
[Professional Gas Saw Chain]：Saw chain is an important part of forest cutting saws, and its performance affects the efficiency of sawing, fuel....
[Automatic oil injection lubrication] : The automatic oil supply system can automatically spray oil for lubrication during the operation of the....
[Easy Purchase Decision]: DEREAL Gas Chainsaw has the advantages of high power, high efficiency, small size and light weight. Besides, DEREAL PRO Gas....

Check Stock

Sea-Doo XP-S 2 Stroke Mineral Oil - 1 gallon

Full synthetic oil specifically engineered to meet the unique needs of Rotax engines, it provides maximum protection against engine wear in E-TEC engines..
Uses a highly-evolved additive package to keep engine parts lubricated, clean and free of wear..
This low smoke, low odor formula also allows for maximum engine performance..
Can be used in direct, semi-direct fuel injection system and high performance carbureted 2-stroke engines..

Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....

Check Stock

BJTDLLX 2 Stroke 12 HP Outboard Motor 169CC Heavy Duty Fishing Boat Engine Marine Engine with CDI Ignition System Water Cooling System

【2-stroke 12HP Outboard Engine】Displacement: 169CC.
Control System: Tiller control Starting System: Manual start..
【Details】Control System: #93 gasoline.
Recommended Propeller range: 3 -9"1/4''x8".
Recommended Lubricant: 2 Stroke Lubricating oil.
【Advantages】water cooling technology improves the reliability of the whole machine.
light weight, easy to carry, unique appearance, large fuel tank capacity. Standard fuel tank capacity: 24L..
【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours..

Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....

Check Stock

4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)

①4 STROKE 4 HP OUTBOARD MOTOR ENGINE:The JET PUMP 4HP 4 Stroke Outboard Motor Boat Engine provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport!.
②DETAILS: Model: 4.0 horsepower jet pump.
Refueling method: No. 92 unleaded gasoline is recommended..
③SIZE INFORS: Packing volume: 95*42*29cm/37.4*16.5*11.4inch.
Gross weight/net weight: 13(28.66lb)/9.7kg(21.3lb).
Recommended engine oil: four-stroke engine oil.
④ATTENTION:Use four-stroke special engine oil (automobile and motorcycle engine oil).
Add oil according to the scale indication on the oil dipstick (the rotating cover),do not add more or less.
The fuel tank of the four-stroke outboard engine can only be filled with....

Check Stock