Best Straight Flute Plug Taps

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

HORUSDY 5-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

HORUSDY 6-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14NPT, 1"-11.5NPT. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
  • Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used..
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B Class High Speed Steel Screw Thread Threading Milling Taps Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 10-32 UNF Thread H2 Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock