Best Steering Tool Kit

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case - 648605

  • Made to be the most reliable tools in the market today.
  • Tool set for removal and installation of power steering pump and alternator pulleys.
  • For use on most power steering pump pulleys.
  • Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve.
  • Kit 20 includes 14-Piece for removal and installation of the power steering pump and alternator pulleys.
Check Stock

VQL Harmonic Balancer Steering Wheel Puller Kit (13 Piece) with Blow-Molded Case Use for Removing Harmonic Balancers, Gear Pulleys, Steering Wheels and Crank Shaft Pulleys

  • 【Widely Used】 Harmonic Balancer Steering Wheel Puller Tool are used to removal of harmonic balancers, gear pulleys, steering wheels and crank shaft pulleys. This is a universal type puller.003c/p003e.
  • 【Durable】 13 Piece Harmonic Balancer Steering Wheel Puller Kit are made of high-quality steel, Drop Forged, Heat Treated, this tool set is very durable.003c/p003e.
  • 【Apply Pressure Evenly】 Yoke allows for either 2 or 3-hole application. The harmonic balancer puller allows uniform pressure on the parts, No need to worry about the steering wheel puller and harmonic puller puller kit will damage the auto parts.003c/p003e.
  • 【Package Included】 1* center screw, 1* Floating swivel, 2* 5/16 x 4 bolts, 2* 1/4 x 3 bolts, 3* 1/4 x 2 bolts, 3* 5/16 x 2 bolts and 1* Blow-molded Case.003c/p003e.
  • 【Various Sizes】 Steering wheel pullers has a caster with four slots for using in nearly any configuration. Various sized provides necessary versatility.003c/p003e Buy with confidence. We provide refund and exchange service, if you have any questions, please feel free to contact us.003c/p003e.
Check Stock

Ducati Corse Windproof 3 Jacket - Size Medium

  • The Steering Stem Nut tool fits all Ducati's with a perforated top nut 748 749 900 916.
  • Using this tool is the only way to check the torque on the steering stem nut, or for its removal and assembly.
  • This Steering Stem Nut tool is equivalent to Ducati Part Numbers 887131058.
  • Steering Stem Top Upper Triple Tree Nut Special Tool Wrench for Ducati Model ST2, S4, ST4, S4R Streetfighter/ Multistrada/ Hypermotard.
  • Steering Stem Nut Removal Tool Fit Ducati 748 749 900 916 996 998 999 1098 1098S.
Check Stock

2009-2018 Subaru WRX STi Nitride Treated Hardened Crankshaft EJ257 2.5L 12200AA430 OEM GENUINE

  • 【Compatible】The crankshaft rear main seal & wear sleeve installer & remover tool kit compatible with Cummins ISX QSX ISX15 ISX12 diesel engines. Replaces OEM 3164780 3162994. Replace multiple seals including 4965569..
  • 【Features】Designed for easy removal and correct installation of the crankshaft rear seal and wear ring/sleeve on diesel engines..
  • 【Advantage】This crankshaft rear main seal & wear sleeve installer & remover tool kit helps reduce the risk of damage to the crankshaft seal surface during disassembly. In addition, the rear seal and wear ring will be automatically installed to the appropriate depth using this special tool 3164780 to prevent damage to the rear seal and leakage..
  • 【Quality】The crankshaft rear main seal & wear sleeve installer & remover tool kit is manufactured by an ISO-certified manufacturer, made of high-quality materials, and meets or exceeds OEM requirements. 100% factory tested, and durable..
  • 【Warranty】2 years warranty for the The upper gimbal steering arm shaft kit! When you have any questions about our products, please feel free to contact us, we will provide the best service..
Check Stock

Mityvac MVA660 Universal Power Steering Adapter Assists in Removing Trapped Air from Automobile Power Steering Systems Cone Shaped Rubber Body for Tight Seal

  • Mityvac MVA660 Universal Power Steering Adapter is used for removing trapped air from automobile power steering systems..
  • Universal cone-shaped rubber body adapts to the varying diameters of many automotive power steering reservoirs (5/8 up to 1 5/8 inches)..
  • Fits snuggly in the neck of the reservoir to form an airtight seal when vacuum is applied.
  • Reduces bleed time following power steering repairs..
  • A handy upgrade for any Mityvac hand pump kit and a must have tool for any automotive repair shop..
Check Stock

JYAU RZR Steering Wheel Puller Tool for Polaris UTV XP1000 Turbo

  • Steering Wheel Puller Tool is a must have for race teams and recreational riders. Made from billet aluminum construction, a heavy duty center bolt for maximum leverage and socket head allen screws for outer edge pressure..
  • Compatible Replacement for Polaris RZR UTV XP1000 Turbo with the 2 threaded holes steering wheel - DOES NOT fit 2018+ XP Turbo S with Sparco steering wheel..
  • This Steering Wheel Puller Tool is designed for Polaris Vehicles with the 2 threaded holes in the OEM steering wheel. We recommend you pop the center steering wheel cover off to verify that your steering wheel has the 2 holes..
  • Usage Method - Heavy duty center bolt for maximum leverage Socket head allen screws for outer edge pressure Screw it to the threaded holes in your stock steering wheel and then tighten the center screw..
  • 1-Year Warranty - This Steering Wheel Puller Tool comes complete with a 1-Year Warranty. If the puller tool ever fails on your Polaris RZR UTV XP1000 Turbo within the period, simply contact us for a replacement. Save time and money by taking advantage of this ..
Check Stock

For GM Vehicle 19168825 Power Steering Fluid Flow Control Valve Actuator Kit

  • Matching the original power steering pump accurately, direct replace the factory power steering actuator kit.
  • Valve actuator kit,it really helped the steering and fixed the jerking problem you having at random.
  • Sometime you had to replace your power steering pump , the pressure valve actuator kit might improve your steering.
  • The valve control kit made of superior material steel which have an unparalleled lifespan with great durability.
  • Package includes the 19168825 power steering fluid flow control valve actuator kit.
Check Stock

LMC5 Module - C5 Corvette steering column lock bypass module

  • The LMC5 bypasses the steering column lock system in 1997-2004 Corvettes. Eliminates Pull Key and Service Column Lock messages and the 2 mph fuel....
  • Important: We have 3 different LMC5 kits available: LMC5 - If your steering wheel turns freely. LMC5 and Unlocker Combo - If your column lock system....
  • The LMC5 installs in the passenger footwell, requiring no steering column access or disassembly. Detailed instructions with color photos are included.....
  • Only two tools are needed for the installation - 1/4 and 5/16 wrenches. Our LMC5 and Unlocker and Tool Kit Combo includes them. Please note: 2001-2004....
  • U.S based toll-free phone tech support is available 9-5 pst, Mon-Sat, to answer any and all product and installation questions - completely free of....
Check Stock