Best Steel Trailer Light Kit

ONLTCO 12V Red Led Square Submersible Trailer Lights, Turn Signal License Brake Tail Light Kit for Under 80 Inch Boat Camper RV Trailers Shorelander Marine, IP68 Waterproof, DOT

✅KIT INCLUDE: 2 Pcs Trailer Lights build in with License Plate Light, Turn Signal Light, Tail Light and Stop Light.
2 Pure Copper Wires: Long Wire is 21.75ft, Short Wire is 4.05ft.
1 Pc License Plate Bracket with lengthened mounting holes makes adjustable when installing license plate and a bag of mounting hardware.
✅COMPLETE SUBMERSIBLE: We sank the light into the lake under 65ft for half an hour, then picked it up and the lights works well. Water-proof IP68, Sealed & Waterproof assemblies, engraved panel makes LED condense, and the light brighter. Please make sure wiring connect correctly.
✅MATERIAL: Accessory Wires is 100% Copper Wires.
License Plate Bracket made from Polypropylene Plastic.
Trailer Lights’ tail light surface and turn signal light surface made from Polycarbonate Plastic with Reflective Function, it's safer to use in the dark. License Plate Light surface made from Acrylic Plastic,with crystal-like transparency, and the light is soft and clear.
and black shell is made from Polypropylene Plastic. Screws and nuts on the lights are made from 304 Stainless Steel.
✅ALL LED: The lights are all led, 12 LEDs in trailer light surface, 4 LEDs in license plate light surface, 1 LED in turn signal Light surface. Complies with DOT standa....

Check Stock

Linkitom New Submersible LED Trailer Light Kit Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Over 80 Inches

HALO Trailer Light Kit : Trailer tail light kits has everything you need, includes two stop turn LED tail lights(Unique halo glow and solid light....
IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of....
Compliant with DOT approved standards: The lamp shade of utility trailer light kit with corrosion resistant ABS material, 100% compliant with DOT....
25ft wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in....
Widely Used: Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure....

Check Stock

Carrep Submersible Square LED Trailer Lights Kit Waterproof 12V Utility Red LED Stop Turn Tail License Brake Running Light Lamp Under 80' Boat Trailer DOT Compliant

Widely Application + DOT Certification⭐ Designed for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc. The LED trailer tail Lights Serves 7 functions: Stop/Turn/Tail/Rear reflector/side reflector/side marker light/ license plate light..
All-in-one Kit⭐Trailer tail light kits has everything you need, with 1 Pairs trailer Lights + 2 gaskets + 2 amber clearance lights + one 22 feet and one 4 feet wiring harness + 1 license plate bracket + 4 reflective sticker + some screws..
Completely Sealed and Waterproof⭐ No screw on the lamp shade.Submersible Led Trailer Lights's lens and housing are completely welded together, The circuit board of tail light is seal..
High Visibility LED⭐ All diodes are LED, NOT Any incandescent bulbs! High Brightness LED Combination tail lights last more 30-40 times than standard incandescent lights.And trailer light kit uses less energy than traditional standard incandescent lights. It saves you time and money..
Installation Tips⭐Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Product Description or User manual. Gifts for dad men him..

Check Stock

MAXXHAUL 50520 12V LED Compact Submersible Trailer Light Kit for Vehicles Under 80 Inches

Our trailer light kit has multiple useful functions such as for stopping and turning, as a tail light, as a rear or side reflector, as a side marker light, or as a license plate light..
Wiring harness is made from 18 gauge 100% pure copper wire to ensure a reliable and long-lasting product that remains effective even underwater..
Designed with LED instead of incandescent lights, further adding visibility and providing a much more energy efficient product..
Our product is sealed with sonic welding technology to prevent any liquid or debris from entering and to secure the trailer lights while being used underwater..
The compact size of the trailer lights provides further portability and the attachable bolts guarantees easy installation on either the rear or the side of your vehicle..
Our trailer light kit is compatible with towing vehicles such as boats, trailers, trucks, etc. that are under 80 inches..
PLEASE SCROLL DOWN AND BROWSE OUR A+ PAGES FOR MORE PRODUCT INFORMATION..

Check Stock

LINKITOM Submersible LED Trailer Light Kit, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Under 80" Inch

Trailer Light Kit : Led boat trailer light kits has everything you need,includes two stop turn signals LED marker lights, two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker..
IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards..
Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, 100% compliant with DOT standards.
25ft wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and durable for the long term..
Widely Used : Widely applicable to 80 Inch wi....

Check Stock

The Long, Long Hauler!

CONVENIENT TRAILER E TRACK KIT - E Track Kits make it easy to get started with E-Track or to pick up coordinated essentials. This kit includes components well-suited for securing cars, ATVs, and other recreational vehicles on your flatbed trailer..
EASY TO USE - The included wheel straps are fitted with E-Fittings so you can easily snap them in and out of the horizontal E Track Rails. The rubber blocks fit into the rain grooves of the tire for a secure fit. Great for low-profile vehicles..
STRONG AND DURABLE - Our E Track Rails are made from high-quality 12-gauge galvanized steel and the wheel straps carry a working load limit of 2,000 pounds each. This kit is a great system for your vehicle transportation needs!.
E TRACK KIT INCLUDES - (4) 5' Horizontal E Track Rails, (8) Plastic End Caps for Horizontal E Track, and (4) Wheel Straps with E-Fittings. NOTE: Hardware (screws/bolts) to fasten the E Track is not included..
SPECS - Utility Car Hauling Kit | E Track Rails Made of 12-gauge Galvanized Steel | Wheel Straps Working Load Limit: 2,000-pounds each | For safety, it's recommended....

Check Stock

LIMICAR Trailer Wiring Harness Kit, 25ft Trailer Wire, Trailer Wiring Harness with 4 Flat Extension Connector, 4 Pin Flat Wishbond Trailer Wiring for Utility Boat Trailer Light Kit

25FT Male & 4-Flat Female Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (25' & 4') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
25' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..

Check Stock

20' Magnetic LED Trailer Tail Towing Light Kit [DOT FMVSS-108] [SAE STIP] [IP67 Submersible Waterproof] [55lb Magnet] Turn Brake Parking Lights for Truck RV Boat Car Bike Trailer

WATERPROOF - There are times when it's good to think about your towing lights' waterproof rating, 2 AM on a rainy, poorly lit highway is not one of those times. Set your mind at ease with our fully sealed, IP67 rated LED towing light kit..
DOT COMPLIANT - Take the guesswork out of buying taillights online. Our magnetic towing light kit is DOT compliant and SAE rated for use as brake lights, parking lights, turn signals, and taillights..
SECURE - Our kits feature scratch-free 55lb pull force magnets designed to keep your lights firmly attached to your vehicle. Why so strong? Because magnetic trailer lights don't work so well when they're dragging behind you on the ground..
BUILT TO FIT - Equipped with 20' of harness between the trailer plug and the first light unit, 5' between the two lights, and a 4-pin trailer plug, these universal towing lights have you covered no matter what you're towing or what you’re driving..
COMPLETE KIT - Avoid all the shopping around. Our kits come with an extra 4-pin female trailer plug with 3' of harness and quick-connect terminals so you can add these trailer lights to your vehicle even if you don't already have a trailer plug..

Check Stock

LINKITOM New Submersible LED Trailer Light Kit, Super Bright Fully Waterproof Tail Lights, Combined Stop,Tail Lights,Turn and License Lights Function for Boat Trailer

Trailer Light Kit : Led boat trailer light kits has everything you need, includes two stop turn signals LED marker lights, two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker..
IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together. excellent tightness makes it be definitely waterproof and submersible. Work excellent under long rainy days, foggy days or heavy snow weather.
Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, 100% compliant with DOT standards. Combine brake, tail, turn signals, side marker, side reflector, rear reflector, and license plate light..
18 AWG 4 Pin Wiring Harness: 25ft wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and durable for the long term..
Widely Used: Widely applicable to 80 Inch width tractor, such as truck, trai....

Check Stock