Best Steel Toggle Bolts With Wing Nuts

ABN Wing Nut Assortment Set - 150pc Standard SAE Steel Wall Anchors Wing Nuts for 3/16in, 1/4in, and 5/16in Bolts

[Secure Anything]: Use the ABN Wing Nuts Assorted Sizes Kit to secure your bolts and screws for applications where frequent adjustments are needed or for quick part removal.
[Fits Your Every Need]: 6 assorted wingnuts sizes include 1/4-inch wingnuts with a 20 or 28 thread count, 5/16-inch wingnuts with an 18 or 24 thread count, and #10 machine screw wingnuts (3/16-inch) with a 24 or 32 thread count.
[Built To Last]: Constructed from stainless steel with a zinc-coated finish, these assorted size wing nuts ensure maximum strength, longevity, and resistance to rust and corrosion.
[Easy Storage]: 8.3 x 4.3 x 1.3-inch (21 x 10.9 x 3.3cm) transparent plastic carrying case for easy transportation, safe storage, and quick organization.
(6) 4 x 1.3-inch (10.2 x 3.3cm) compartments contain the different size wing nuts.
[Contents]: Wing nut variety pack includes (150) individual butterfly fastener small wing nuts.
(60) #10 machine screw wingnuts, (50) 1/4-inch screw wingnuts, and (40) 5/16-inch screw wingnuts.

Check Stock

PAGOW Power Wing Nut Driver Set Wing Nut Drill Bit Socket Wrench Tool Set 1/4 Hex Shank for Panel Nuts Screws Eye C Hook Bolt Q-Hanger

SAVES YOUR TIME: Wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane....
Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware....
This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6....
This little wing nut driver is made from CR-V steel, highly strong and sturdy.

Check Stock

Smittybilt XRC/SRC Gen2 Bolt-On Tire Carrier - 76857

replacement Hardware Fasteners for Dog Kennels, Cat Carriers.
Replaces missing nuts bolts screws for all plastic pet crates.
Universal will fit all brands - Must measure for bolt-screw length requirement.

Check Stock

PAGOW 2pcs Power Wing Nut Driver Set Wing Nut Drill Bit Socket Wrench Tool Set 1/4 Hex Shank for Panel Nuts Screws Eye C Hook Bolt Q-Hanger

This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing....
Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware....
This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6....
This little wing nut driver is made from CR-V steel, highly strong and sturdy.

Check Stock

Lenink 24 Pcs Toggle Bolt and Wing Nut Kit, Zinc Plated Steel Round Head Butterfly Drywall Anchor 1/4\ 3/16\ 1/8\ for Hanging Lamps, Curtain Rods, Photo Frames

♛【What You Get】: In this toggle bolt kit, it include three most used size which are 1/8'' x 30pcs, 3/16'' x 20pcs, 1/4'' x 10pcs total 60pcs are packed in a durable plastic box, convenient for your use and storage..
♛【Product Material】: All the toggle bolts are made of high quality carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items. Zinc plated on the surface make the product appearance is exquisite..
♛【Spring Wing Design】: Collapsible spring-loaded wings desigh allows you to fold the wings so that they can be placed in the drilled hole. The wings will open behind the plasterboard to provide a reliable fixation..
♛【Easy to Install】: First pre-drilled hole for installation, and then poke these toggle bolts through the hole. Then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, use an screwdriver to screw the bolt in..
♛【Wide Application】: These Toggle bolts can be widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..

Check Stock

MARRTEUM 3/16\ Toggle Bolt and Wing Nut Zinc Plated Steel Toggle Drywall Anchors Screws for Hanging Heavy Items, 20 PCS

✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..

Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....

Check Stock

Pagow Deep Power Wing Nut Driver Set- Slot Wing Nuts Drill Bit Socket Wrenches Tools Set Hex Grooved Socket for Panel Nuts Screws Eye C Hook Bolt Q Hanger 1/4 Hex Shank 2

Size: this steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about....
This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or....
Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware....
Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook....
This nuts tools A must have for hurricane Snowstorm prone areas.

Check Stock

PAGOW Upgraded Large Slotted Hurricane Wingnut Driver - Wing Nut Drill Bit Socket Tool 1/4 Hex Shank for Panel Wing Nuts Screws Eye C Hook & Q-Hanger Steel

This wing nut driver has a big slot with more than 7.5mm (0.3 inch) wide, which's bigger than other wingnut drivers, if you are looking for a big one....
Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
Designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panel, matches with any power drill....
A must have for hurricane prone areas, up to 5x faster than you can by hand, save your time when hurricane is coming..
Made from CR-V steel, which is highly strong and sturdy for long time use..

Check Stock