Best Steel Swivel Trailer Jacks

Boat Trailer Jack,Heavy Duty Trailer Jack with 6 Inch Dual Wheels,1500 lbs Swivel Trailer Tongue Jack,Bolt-on Trailer Jacks,10\ Vertical Travel, Black

【Corrosion Resistant Finish&Bearing Capacity】Boat Trailer Jack body is made of high quality black powder-coat corrosion-resistant steel,Zinc finish on the rest.Overall heavy-duty steel structure, reliable strength, long-lasting corrosion resistance.Features 1500 pound bearing capacity..
【Adjustable Height&Easy to Operate】 This trailer tongue jack allows 10 inches of vertical movement (12.6 inches retracted height, 22.6inches extended height).The ergonomic hand crank handle is easy to grasp and comfortable to hold,which allows you to easily swing jack in place,The height of the whole dual wheel jack will can be stretchable from 24.8inch to 34.8inch..
【Double Wheel Design】 For easier coupling and positioning of your boat trailer,each boat trailer jack is equipped with 6inch diameter double wheel at the base, can rotate 360 degrees,giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue.Compared with most wheels on the market, dual wheel trailer jack wheel replacement is stronger and more stable..
【Swivel Plate & Pull Pin Design】 For increased safety while towing and ease of use, this trailer jack stand is equipped with a swivel bracket,can 360° swivel.the jack swings up and out of the way for....

Stability: The base of these machinist tools is 1.5” for added stability.
Durable: Consists of a heavy steel cast base with an adjustable steel screw and a tilting swivel head with a lock nut for permanent positioning.
Weight Capacity: The total weight capacity for the machinist jacks is 1000lbs.
Set Includes: Two machinists jacks along with a fitted case.

Powered trailer jack with 4,500 pound rating, 12-volt operation, hardened steel gears, and soldered connections.
18-inch full stroke with 6-inch adjustable drop-down leg reduces time to set jack and reduces wear on motor.
3-sided LED light system to illuminate hitch and spring bar area.
Features a friction-reducing ball screw, usually only found in more expensive jacks.
Weather-resistant trailer connector storage bracket with durable hammer gray finish.

Stabilize your Trailer in less than 60 Seconds. Made in USA System Stabilizes Parked Travel, Camper, or Fifth Wheel Trailer.
Trailer Must Have 4 Jacks, 2 front and 2 Rear for the system to be installed. Includes the two required Foot Plates plus two additional so all jack footplates will match..
Installs Permanently so there is nothing to setup or store. Approximately 2-3 hour install...
Works on both 5th Wheels and Travel Trailers with existing stabilizer jacks. If you have an Auto Leveling system Please check out our Item C..
Eliminates Need for Tripod. Between Wheel Chocks, and Slide Out Jacks.

... Heavy Duty RV Stabilizer Jacks will minimize front-to-back and side-to-side motion so you can enjoy your everyday activities discreetly.
[Physics At Work]: Align gooseneck camper stabilizer jacks under the king pin of your camper or motorhome to lift the front end of your trailer and adjust the center of gravity.
5,000-pound (2.5ton) weight capacity adds support and enhances stability.
[Built to Last]: Steel RV fifth wheel tripod stabilizer jack is powder-coated to resist elements and provide optimal durability.
Zinc-plated chain keeps RV stand legs aligned for optimal strength and reliability.
[Fits Your Needs]: 4.5-inch (11.4cm) tall cup has a 3-inch (7.6cm) internal diameter to fit the king pin on your travel trailer, camper, boat, and mobile home.
Threaded bar makes it easy to adjust the cup height.
[Adjust and Store Easily]: King pin 5th wheel stabilizer jacks adjust to heights between 39 and 57 inches (99.1 x 144.8cm).
When not in use, adjustable tripod folds to 7-inch (17.8cm) diameter for easy storage.

Fulton F2 Jack Adapter Plate allows you to upgrade from a Fulton Center-Bolt Swivel Mount Jack to an F2 Series Marine and Recreational Jack.
Fits Fulton's patented center-bolt design - used on XP10 and XP15 weld-on jacks.
Heavy-duty, cast aluminum mount is tapered, moving wheel closer to center line of trailer frame to optimize castering performance.
installs easily - no drilling or welding required.
All necessary mounting hardware and complete installation instructions included.

DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
EASY OPERATION. This trailer tongue jack allows for 15 inches of vertical movement and operates using a top-wind handle (16-1/2-inch retracted height, 31-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.

DEPENDABLE STRENGTH. This trailer jack is rated to support up to 2,000 pounds trailer tongue weight.
SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
EASY OPERATION. This trailer tongue jack allows for 10-1/2 inches of vertical movement and operates using a top-wind handle (11-1/2-inch retracted height, 21-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel bracket for ready welding.

DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
EASY OPERATION. This trailer tongue jack allows for 10 inches of vertical movement and operates using a side-wind handle (10-1/4-inch retracted height, 20-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.