Best Steel Pipes Tubes

Knipex 95 36 250 Cable Cutters 9,84\ VDE-tested in black

  • For cutting composite pipes with diameters from 12.0 to 25.0 mm and for cutting flexible Protective tubes with a diameter of 18.0 - 35.0 mm.
  • A calibration arbor can be fitted, for example for Geberit composite pipes with 11.5 and 15.0 mm diameter.
  • Tool body made of high-grade chrome vanadium electric steel, oil-hardened.
Check Stock

Spears 448-G Series PVC Pipe Fitting, Cap, Schedule 40, Gray, 2' NPT Female

  • Protective - Carbon steel pipes are easy to get rust from the two sides of the pipe, for its coating/ painting on the two sides will be damaged easily. The vinyl caps can protect these ends by covering it, anti slip &tear, and they can also block water vapor to some extent..
  • Flexible - Made of high quality PVC, super soft &flexible. (Attention! The size in the title means they fit for the OUTSIDE DIAMETER of the pipes).
  • Easy to install - Just slip them on both ends of the pipes, and they will be firmly fixed to both ends of the pipe..
  • Multi-purpose - Suitable for covering posts, feet of furniture ,handrails, wrought iron pipes, tubes for indoor& outdoor uses..
  • Optional sizes - Round: 3/4”, 7/8”, 1”, 1 1/4”, 1 1/2”, 1 3/4, 2”. Square: 1”..
Check Stock

Spurtar Mini Tubing Cutter Pipe Cutter Tube Cutter Tool 1/8 to 1-1/8 inch (3-28mm) for Copper Pipe Thin Stainless Steel, Brass, PVC Plastic Aluminum Pipe

  • Mainly used for cutting of soft and hard copper, aluminum, brass, plastic tubes, thin-walled stainless steel pipes and other thin pipes or tubes. Please note not suitable for bike seat or bike handlebar cutting, only for soft or thickness wall ≤3.8 mm tube.
  • Spurtar Pipe Cutter is a Must have Steel Cutting tool for every plumbers, electricians, vehicle mechanics, homeworkers for hobby or proffesional work.
  • The tube cutter has a sturdy, lightweight slide, wheel housing and large knurled screw knob for easy control of cutting pressure for clean cuts..
  • Metal pipe cutting tool with adjustable cutting capacity range between 3mm to 28mm (1/8 inch to 1-1/8 inch).
  • Anti-scratch electrostatic powder coating reduces the effects of static electricity during use, resistant to corrosion and rust..
Check Stock

Bristle Cleaning Brush with Fan-Shaped End 12.5 - Twisted Stainless Steel Wire Handle - Ideal for 1.25 - 1.5 Diameter Glassware Beakers Tubes Cylinders Flasks Cups Jars Vases - Eisco Labs

  • CLEANING BRUSH || Brush designed to scrub narrow neck bottles, tubes, pipes and more. Brush (including handle) measures 12.5" in total length.
  • STAINLESS STEEL HANDLE || Brush features a stainless steel, twisted wire handle that is resistant to corrosion. Moderate flexibility allows you to modify the handle shape if needed.
  • GREAT FOR CLEANING NARROW SPACES || Excellent for scrubbing hard-to-reach, narrow spaces including test tubes, pipes, cups, bottles, jars, vases, laboratory glassware, measuring cylinders, beakers and more.
  • FANNED TIP || Brush features medium soft fiber bristles with a fanned end for reaching every surface and corner. Fiber section measures 5" in length and is 1.5" in diameter.
  • DESIGNED FOR PROFESSIONAL LABORATORIES || Designed for use in professional laboratories, but is perfect for use in the home and garage.
Check Stock

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

  • 1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
  • Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
  • 180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
  • Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
  • Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..
Check Stock

Anderson Metals - 00069-1212 Brass Tube Fitting Elbow 3/4 Compression x 3/4 Male Pipe

  • 90-degree elbow for connecting two pipes or tubes at an angle.
  • Fitting connects to pipes or tubing on one end and an NPT male connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -65 to 250 degrees F.
  • Suitable for copper, brass, aluminum, and steel tubing.
Check Stock

Bates- PVC Pipe Cutter, Cuts up to 1-1/4\

  • Bates ratchet-type pipe cutter is made of manganese steel with high hardness, good toughness, strength, and durability. It also features a ratchet mechanism that makes cutting through pipes quick and easy - perfect for anyone who wants to get the job done fast..
  • The rubber-textured handle is comfortable to use, reliable to hold, and not easy to hurt. A stainless steel buckle is at the bottom of the tube cutter for easy storage. When you don't use it, you can shrink the handles on both sides and lock the security lock to save space and prevent accidental injury..
  • Bates ratchet-type pipe cutter is perfect for easily cutting through pipes. The triangle design at the edge of the knife allows better access to the pipe, while the unique structure design makes it easy to cut pipes with a few presses..
  • This tool is not only powerful but also easy to use, which makes it an ideal choice for people who are not familiar with such tools. The fish-shaped handle provides a comfortable grip that guarantees long-lasting working..
  • Our tube Cutter is ideal for use on various plastic pipes and tubes. It is an essential cutting tool for handymen, plumbers, electricians, and vehicle mechanics. The cutter is commonly used for cutting most kinds of plastic (PVC, CPVC, PP, PEX, ....
Check Stock

Tapered Nylon Cleaning Brush with Cotton Yarn Tip 8.75 - Twisted Stainless Steel Wire Handle - Ideal for 0.5 - 0.75 Diameter Test Tubes Bottles Flasks Cylinders Jars Vases Cups - Eisco Labs

  • CLEANING BRUSH || Brush designed to scrub narrow neck bottles, tubes, pipes and more. Brush (including handle) measures 8.75" in total length.
  • STAINLESS STEEL HANDLE || Brush features a stainless steel, twisted wire handle that is resistant to corrosion. Moderate flexibility allows you to modify the handle shape if needed.
  • GREAT FOR CLEANING NARROW SPACES || Excellent for scrubbing hard-to-reach, narrow spaces including test tubes, pipes, cups, bottles, jars, vases, laboratory glassware, measuring cylinders, beakers and more.
  • TAPERED NYLON BRISTLES WITH COTTON TIP || Brush features tapered, medium soft nylon fiber bristles with a cotton tip to prevent scratching glassware. Fiber section measures 4" in length and tapers from 1" to 0.5" in diameter.
  • DESIGNED FOR PROFESSIONAL LABORATORIES || Designed for use in professional laboratories, but is perfect for use in the home and garage.
Check Stock

Makita B-40559 Compact Portable Band Saw Blade 32-7/8 18TPI 5/pk stainless

  • Improved Welding Process for Longer Blade Life.
  • Wavy Tooth Set for Clean Cuts in Sheets, Tubes and Pipes.
  • Designed to Cut Non-Ferrous Metal, Mild Steel, Cast Steel and Cast Iron and Stainless Steel.
Check Stock