Best Steel Pipe Line

Faucet Supply Lines Connector Stainless Steel Braided Supply Hose 3/8-Inch Female Compression Thread x M10 Male Connector, 24-Inch Long x 2 Pcs (1 Pair)

Standard US 1/2 "internal thread, the faucet supply line connector inlet is 3/8" compression connection to the supply stop valve, its outlet is 1/2 "female iron pipe (FIP or IPS), its total length is 11-4/5". There are 6 pieces 1/2 supply line in the package..
The 1/2 inch faucet supply lines external and internal are made of high quality 304 stainless steel material, rust proof and corrosion proof, not easy to break, and longer service life..
Thick rubber gasket with a high sealing hose, can effectively prevent leakage.The 1/2 inch sink hose is woven of high strength stainless steel to ensure maximum pressure and optimal performance. Let you always avoid the unpleasant of a broken water pipe..
The braided faucet line connector is easy to install, flexible hose, easy to handle, sturdy stainless steel nut, plus the hose is equipped with an ABS wrench, no other tools, direct hand tightening to complete installation..
The 1/2 inch toilet supply line It can be compatible with most standard size faucets. Suitable for kitchen, bathroom, toilet, washbasin, water heater, toilet, hot and cold water supply, base faucet, etc..

Check Stock

OhLectric 1 Hole 1/2 Inch Pipe Strap - Reinforced Rib For Extra Strength - Zinc-Plated Steel Pipe Strap Clamp For EMT Conduit - Snap-On Installation - Pack Of 100 OL-43022

PREMIUM QUALITY: Quality is our foremost priority! Constructed with galvanized steel with a rigid EMT thickness, our pipe straps are sturdy, strong....
EXCELLENT FIT: Are you feeling irritated at using old steel pipe straps? The solution is here to make your work easier. This strap takes less time to....
IDEAL CHOICE: Stands for the tests of time! Engineered with innovative foldable features, it is used in fixing pipes to various supporting structures,....
EASY INSTALLATION: A single hole design makes it easy for the plumber or other installer to secure pipes to any surface! You can reuse our pipe strap....
ACCURATE SLIDE SIZE: This wide pipe strap measures ½ inch is the perfect clamp to hold EMT and IMC conduit, metal pipe, pipe, power line or cable for....

Check Stock

Fuel Line Pliers Quick Release Remover Set, 9 inch Fuel Filter Calipers Tools for Auto Removal Fuel Filter Line & 7PCS Air Conditioning Cooling Pipe Hose Circlip Pliers Kit

【Superior Quality】Fuel filter calipers is forged from high hardness carbon steel. After high-temperature smelting treatment, it is not only strong, but also durable. The metal surface is treated by the carbon black coating process with anti-oxidation treatment, so it will not become dim due to rust. The handle is made of PVC material and heated as a whole. It has a strong heat insulation effect and can provide you with comfortable grip without sliding easily..
【Ergonomic Design】The design of the spring automatic rebound function of the fuel filter caliper can help you save time and effort in the operation process. Coupled with the comfortable handle and the cooperation of different sizes and angles, you can easily disassemble the vehicle fuel pipe or air conditioning cooling hose even in the dead corner where the space is narrow or difficult to work..
【Easy To Use】This set of quick disassembly pliers for automobile oil pipe and air conditioning pipe has a variety of sizes, the handle is easy to grasp, and the jaw has a variety of angles such as 45º/ 90º/ 180º, allowing access to small areas that are difficult to reach. Clamp the jaw on the fuel p....

Check Stock

IZOKEE 1/4\ Inch ID Fuel Line Set - 2 Meter / 6-Foot ¼ Inch Fuel Line + 2 Pcs 1/4 Inch & 5/16 Inch Fuel Filters + 10 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine

【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line.
10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!.
【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications..
【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power..
【Hose Clamps】Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage..
【Wide Application】Fits selected Briggs & Stratton, Kohler, Craftsman, Simpson, Kawasaki, Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that use this type filter for motorcycle, lawnmower, power equipment and small engines ect..

Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
Tubing benders can make left, right, and offset bends up to 90-degree angles.
DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
Safe soft copper tubing bender and metal tubing bender for any brake line kit.
Excellent tubing pliers for mild steel pipes and tubes.
HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
Sturdy manual tubing bender makes the job much easier.
BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
Left, Right, and Offset Bends Up to 90-degree Angles.

Check Stock

DCT Multi-Angle Adjustable 13ft Band Wood Corner Clamp – Woodworking Clamping Kit that Clamps Picture Frames & More

...u will get 50 pcs metal u bracket. The M12 pipe strap clamp is suitable for pipes with a diameter of 12mm/0.47inch. The diameter of the mounting hole is 4mm/0.15inch, the width is 11.7mm/0.46inch, and the thickness is 0.5mm/0.02inch..
HIGH QUALITY CLAMP - Tube strap tension clip is made of high-quality 304 stainless steel material, high hardness, corrosion resistance, water resistance, oil resistance. The surface is treated with rust prevention, and it can be used in a humid environment without worrying about rust. The metal pipe clamp adopts superb production technology, the surface is smooth and burr-free..
MULTIPLE USE - The u-tube clamp is widely used in stainless steel pipes, rubber hoses, gas pipes, plastic steel pipes, drainage pipes, etc. The rigid pipe strap is suitable for fixing pipe line with oil, water and gas..
SLOTTED DESIGN - The slotted design is more sturdy and not easily deformed. The U-shaped slotted design is suitable for fixing pipes on various surfaces and supporting structures. The metal pipe strap can be fixed on the wall and ceiling with screws or expansion screws, and the installation is simple fast..
QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% sa....

Check Stock

Mechanical Test, Seal & Cleanout Pipe Plug, 3 9/16" to 4 1/8" Winterizing Pool Plug, Anti-Return Pipeline Plugging, Expandable Rubber Stainless Steel Marine Boat Drain Plug T-Handle

【Convenient, Practical & Leakproof Plugs】The BOPOREAE T-Handle Drain Plug is a twist/turn pipe plug for a leak proof seal. The Premium Stainless Steel and Nitrile Butadiene Rubber (NBR) construction makes this rubber hole plugs resists heat, anti-freeze, oil and rust inhibitors, wear-resistant, wet-dry versatile and airtight.
【What Is This Plug Used For?】This Universal Rubber Expansion Plug is an Adjustable Stainless Steel Scupper Plugs which can replace any standard 1" to 4 1/8""(25-105mm) test and seal plug for various Drainage Hole&Pipe Opening.
Round rubber pipe plugs can be used for Low Pressure & Leakage Test, Drain Pipe Sealing & Clean-Outs for Kitchen, Bathroom, Garden, Automotive, Construction Industry, Kayak and Marine Boats, etc..
【How To Use?】The BOPOREAE pipe hole plug seal installs easily, no tool required. Turn the handle clockwise the rubber will be squeezed and expanded until the hole is clamped forming a leak-proof seal.
Turn the handle counterclockwise the rubber plugs returns for easy removal and next installation.
You will love this premium practical and convenie....

Check Stock

KIPA 5/16\ Inch ID Fuel Line Set - 2 Meter / 6 Foot 5/16\ Inch Fuel Line + 4 Pcs 5/16 Inch Fuel Filters + 20 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines

...wer equipment and small engines Tool Etc..
Perfect fuel filters, They could effectively Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor & Fuel pump & Fuel Tank, transmiss Steady clean fuel flows and keep engines Running at the top performance...
Hose Clamps: They are Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage, make your fuel line mounting all the safe..
Super Pressure rating and permeability. Each KIPA Fuel Line sections are strictly tested to ensure the durable safe and reliable use. KIPA fuel line reduce permeability we will save money in lost fuel, save the environment big-time and most of all, They are the best-cost performance, you really deserve.

Check Stock

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..

Check Stock