Best Steel Fittings

Northern Brewer Stainless Steel Counterflow Wort Chiller

Chill your wort like the professionals do!.
A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.

STEEL CABLE RAILING FITTINGS – This hand swager crimper is perfect for crimping the stainless steel fittings of cable railings and boat rigging..
Provides 8 US tons of crimping force for use with swaging 1/16″~1/4″ inch fittings onto 1/16″~1/4″ wire rope cable,.
This cable cutter is designed for cutting steel wire which up to 5/32”, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8” 7×7 assemble coated steel security cable it still very sharp and clean cut.

{SYSTEM COMPONENTS} Base 10 Nozzle Mist Kit Includes: 1- 250 psi mid pressure pump with built-in solenoid and filtration.
10- cleanable brass/stainless steel Nozzles (0.012").
Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
{MADE IN USA PUMP} Whisper quiet operation Built in Solenoid Valve.
Outdoor Enclosure Wall Mountable Enclosure Max Pump Pressure 250 Psi 110v AC (Available in 12vdc and 220v on request) Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable push lock fittings.
{APPLICATIONS) Residential Misting, Industrial Cooling, Warehouse Misting, Outdoor Restaurant.
{FITTINGS FEATURES} Fittings are Brass /Nickel Plated Fittings - to Make your Misting System more durable.
{SUPPORT} 24/7 Support from mistcooling Texas. MC12080-MC12092.

CONVENIENT TRAILER E TRACK KIT - This kit includes everything you need to get you started with your E Track System! The kit includes E Track Rails, Ratchet Straps, E Track Fittings with O-Ring, J Hook Fittings, End Caps and a storage bag!.
EASY TO USE - The included Cargo Straps, O-Ring Tie Downs, J-Hook Fittings, and Storage Bag all have E-Fittings which makes it easy to snap them in and out of the E Track Rails so you can customize your setup depending on what you are hauling..
BUILT TO LAST - Our E Track Rails, Cargo Straps, and E Track Accessories are made from high-quality materials such as galvanized steel and 6,000 lbs polyester webbing. They're strong and durablE - so you can secure your cargo with confidence..
KIT INCLUDES - (4) 5' Horizontal E Track Rails, (8) Plastic End Caps, (6) Straps (12', 16' and 20', 2 each), (4) O-Ring Fittings, (2) 2" J Hook Fittings, (2) 4.5" J Hook Fittings and (1) Storage Bag. NOTE: Hardware to fasten the Track not included..
SPECS - E Track Rails Made of 12-gauge Galvanized Steel | Cargo Straps Working Load Limit (WLL): 1,467 lbs. |....

[Complete Brake Line Replacement Kit] This complete stainless steel kit contains all parts necessary to replace a 3/16” brake line.
[Marine Grade] Our stainless steel brake lines are manufactured using 316L stainless steel with added molybdenum for superior corrosion proof properties.
[Extreme Strength] The included stainless steel fittings provide 2x the tensile yield strength as mild steel or brass fittings.
[16 Fittings Included] (2) 3/16 (7/16-24 Inv), (4) 3/16 (3/8-24 Inv), (2) 3/16 (M10 x 1.0 Bub), (2) 3/16 (M10 x 1.o Inv), (2) 3/16 (9/16-18 Inv), (2) 3/16 (1/2-20 Inv), (2) 3/16 (M12 x 1.0 Bub).
[Meets All Specifications] Meets all SAE J16776 and ASTM A249 specifications.
[Lifetime Warranty] All of our products are backed by our 4LifetimeLines Limited Lifetime Warranty.

Eliminate The Guesswork Of Which Wrench Is Needed To Tighten, Remove Or Check Steel Braided Hose Fittings.
Prevents Damage To Fittings And Is For Fittings.

Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.

... ✔ VERSATILE SNATCH BLOCK. Our snatch block is compatible with ⅜ inch wire rope, which makes it compatible with both steel core (IWRC) wire rope and fibre core (FC) wire rope options. Choose the wire rope that’s right for the job at hand!.
✔ GREASE FITTINGS FOR MAXIMUM SWIVEL. Our snatch block and shackle utilizes grease fittings, also called Zerk fittings or Alemite fittings, to continually move lube from a grease gun to the fitting point at the top and sides of the snatch block..