Best Steel Connection

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Joywayus Pressure Gauge 0 to 200 PSI Brass 1/4" Male NPT Thread Lower Mount, Multiple Function

  • Brass 1/4" Male NPT Connection. 2" Dial Display..
  • Fluid: Brass Connection: 80°C / Steel Connection: 100°C.
  • This gauge is design For Plumbing, Heating, Air Conditioning, Pneumatic, Hydraulic, Water Tanks, And Air Compressors..
Check Stock

80Pcs M8x1.25 Threaded Inserts Stainless Steel Spiral Helical Thread Insertion Kit

  • GOOD CONNECTION PERFORMANCE: Steel thread inserts used in low-strength materials such as aluminum and magnesium can avoid thread damage and obtain good connection performance, thereby improving connection strength and improving connection conditions..
  • WEAR RESISTANCE: Used for parts that need to be disassembled frequently, which can greatly improve the service life and wear resistance of the thread..
  • ELASTICITY: Due to a certain elasticity, the thread insert can make the load distribution on each thread uniform, eliminate the pitch and tooth deviation between the screw and the screw hole, and absorb vibration, thereby improving the thread connection strength and fatigue resistance strength..
  • PREVENT LOOSENING: Wire sleeve thread repair insert can prevent loosening of screws, especially for products requiring high safety factor..
  • EASY TO MAINTAIN: Insert the thread into a damaged screw hole, and then use the screw hole normally to avoid the loss of the workpiece..
Check Stock

200 PCS Twist Nuts Caps, SIM&NAT Wire Nuts Screw-On Terminals Electrical Wire Connectors with Spring Insert Assortment Set

  • Wire Cap - No Pre-twisting wire & soldering & tools needed. pull the wires into connector and screw on, spring steel ensure a stable connection when working on wiring projects. They are plastic and they have the expected spring steel little twisty thing in the neck that helps complete a good connection..
  • Screw-On Wire Connector Assortment: Grey, Blue, Orange, Yellow and Red connectors, Perfectly fits for most electrical wiring projects and applications.
  • Applications: Electrical Wire Nuts are great for home theater, speaker wire, stereo wiring, automotive, marine wiring projects, househould wiring projects, commercial or residential applications and etc..
  • Assorted sizes 10ga-22gafor various electrical wire gauges, great addition to your electrical connector kit!.
  • Packaging Included: 60 pcs gray wire nuts, 60pcs blue wire cap, 50pcs orange electrical wire connectors, 18pcs yellow Screw-On Wire Connector, 12pcs red wire connection nuts.
Check Stock

Nite Ize SlideLock 360° Magnetic Locking Dual Carabiner, Twist-to-Lock Collar for Separating Keys, Olive

  • MAGNETIC LOCKING CARABINERS - Clip keys and small items for instant accessibility to one carabiner and clip the other to a bag, belt, or other set of keys, twisting the collar for a locked connection or leaving it unlocked for quick release.
  • PULL TO RELEASE + GO - When the collar is unscrewed, the magnetic carabiners can be separated with a light pull, keeping one side attached to your bag, belt, or key rack while bringing the other carabiner (and its items) with you.
  • TWIST TO LOCK THE CONNECTION - The two carabiners are joined by powerful neodymium magnets and an aluminum collar that requires a simple twist to lock, reinforcing the connection to prevent theft or drops.
  • SLIDE TO SECURE KEYS + VALUABLES - To keep your individual items secured on either carabiner, simply move the SlideLock collar down to lock the gate closed, preventing keys from getting lost or slipping off.
  • PREMIUM ALUMINUM + STAINLESS STEEL COMBO - Each solid aluminum carabiner is equipped with stainless steel locking gates and joined by an aluminum locking collar for rugged durability while remaining lightweight.
Check Stock

FATAWKC Sail Shade Pole Kit, 8.9FT Sun Shade Sail Pole Kit, 1.8\ Diameter Outdoor Sun Shade Sail Poles for String Light, Patio, Backyard (1Pack)

  • Quality Materials-FATAWKC sun shade sail pole is made of good quality steel, strong wind resistant, and rustresistant..
  • Unique Design--Most innovative designDifferent from the threaded connection of other manufacturers, the thread reduces the thickness of the steel pole body and is prone to breakage in the case of strong winds and heavy loads.FATAWKC Sun Shade sail Poles adopt a unique connection design of large and small heads, which not only avoids reducing the thickness of the steel pipe, but also ensures the stability of the connection..
  • Product includes--FATAWKC Outdoor Sun Shade SailPoles consists of 1x top rod with 3 fixed rings +2x middle rod + 1x buttom rod with fixed base (canvas not included)And the sail ring is directly welded to the pipe.We make every effort to make your sunshade sail stronger.
  • WideApplication--Sun shade sail poles can be installed on hard ground such as cement, concrete or wooden decks,Sun shade sail poles are suitable for garden, backyard, courtyard, private swimming pool, courtyard, etc.This pole is not suggested to use on grass or soft soi.
  • Customer Service– if any issue with your order, please feel free to contact us through your order with detailed photos, We'll try our best to solve any problem for coustomers.
Check Stock

FATAWKC Sail Shade Pole Kit, 8.9FT Sun Shade Sail Pole Kit, 1.8\ Diameter Outdoor Sun Shade Sail Poles for String Light, Patio, Backyard (4Pack)

  • Quality Materials-FATAWKC sun shade sail pole is made of good quality steel, strong wind resistant, and rustresistant..
  • Unique Design--Most innovative designDifferent from the threaded connection of other manufacturers, the thread reduces the thickness of the steel pole body and is prone to breakage in the case of strong winds and heavy loads.FATAWKC Sun Shade sail Poles adopt a unique connection design of large and small heads, which not only avoids reducing the thickness of the steel pipe, but also ensures the stability of the connection..
  • Product includes--FATAWKC Outdoor Sun Shade SailPoles consists of 4x top rod with 3 fixed rings +8x middle rod + 4x buttom rod with fixed base (canvas not included)And the sail ring is directly welded to the pipe.We make every effort to make your sunshade sail stronger.
  • WideApplication--Sun shade sail poles can be installed on hard ground such as cement, concrete or wooden decks,Sun shade sail poles are suitable for garden, backyard, courtyard, private swimming pool, courtyard, etc.This pole is not suggested to use on grass or soft soi.
  • Customer Service– if any issue with your order, please feel free to contact us through your order with detailed photos, We'll try our best to solve any problem for coustomers.
Check Stock

Shark Industrial 15FT Stainless Steel Braided Ice Maker Hose with 1/4 Comp by 1/4 Comp Connection

  • ONE 15FT 304 stainless steel braided premium icemaker hose with 1/4" comp x 1/4" comp connection..
  • BURST PROOF - Designed to last, our hoses use true 304 stainless steel for braided outer protective cover which last incredibly long time for....
  • INDUSTRY STANDARDS - Our hoses comply with following standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372.
  • EASY FIT - Our hoses connect to ice maker with standard 1/4" comp connections compatible with most ice makers. Make sure the connection is 1/4"....
Check Stock

CAMP Universal Piton - 2

  • Safety Material: 304 stainless steel assembly that offers excellent resistance to corrosion in typical exterior environments, high strength, good flexibility, light weight, rust resistance and corrosion protection..
  • Sturdy Anchor: The bolt hanger is rated at 25kN, which offers a safe connection point for you. The embedded end of the expansion screw is designed with an expansion sheet, which expands internally when stressed, which is safe and reliable..
  • Anti-rotation System: Textured back keeps the hanger from turning when the anchor is being installed or when it is heavily laterally loaded during use..
  • Easy clipping: The wide, ergonomic connection hole facilitates fast clipping - the width of the hole allows installation of two at the same time..
  • Prevents wear of connectors: The AOKWIT thickness of the hanger and the rounded edges of the connection hole limit wear of connectors..
Check Stock