Best Steel Banding Machine

Chamfer Plane Edge Plane Edge Banding Trimmer Veneer Edge Trimmer Edge Chamfer Burr Scraper for Woodworking (R1)

  • This plane is used to chamfer or deburr edge banding to give sheets with smooth curved edges.
  • Aluminum alloy body,tungsten steel blade,CNC machined,well made and sturdy.
  • Replaceable tungsten steel blade and on one blade has two cutting edge,equivalent to you get two blade.
  • This edge banding trimmer with portable size and easy to carry.
  • 3 Types Optional: The R1 type is suitable for both thin and thick edge banding, thickness from 0.8mm to 2.0mm.
  • R2 type is suitable for the thicker edge banding, thickness from 1.5mm to 2.0mm.
  • R3 type is suitable for solid wood board chamfering.
Check Stock

Edge Banding Trimmer for All Directions, Edge Trimmer with Tungsten Carbide Blades (1-Pack)

  • Easy To Use - Works perfectly with no practice or experience, Pneumatic action allows the edge banding cutter to adjust to different thicknesses very easily. Makes edge banding a breeze, is very comfortable to use, will not cause palm fatigue..
  • Save Time - Using our edge banding tools can greatly reduce the time and effort to complete the work, no more utility knives or razor blades. This plywood edge trimmer tool makes it so easy!.
  • Sharp, Leave No Trace - The sharp tungsten carbide blades to make the trimmer cut smoothly and cleanly and leave a nice edge. Will not cause the problem of excessive cutting. Clean, tight incisions, no confusion or fuss..
  • Easy Conversion - Easy to disassemble and assemble! When you cannot slide the tool with the two jaws due to the special gap problem, you can take the veneer edge trimmer apart and use it on one edge at a time..
  • Cuts in Both Directions - The edge banding machine has four sharp cutting edges, which can trim forwards and backward. This is very suitable for trimming oak edge banding and is suitable for any project that involves installing ....
Check Stock

Pallet Packaging Strapping Banding Kit Tensioner Tool Sealer, 3200' Length x 1/2' Wide Coil Reel for Packing (Yellow)

  • ...arge boxes or cartons as well as bundles and crates. Ideal for every busy packing department or warehouse, this sealing tool is manufactured with full-length chrome steel handled sealing jaws that allow maximum seal strength to be achieved with minimum physical effort.
  • Widely Used: A must have if you are moving. The banding tools could strap anything you want. In addition to the corrugated box for the sealing, hot-rolled steel strapping, cold-rolled steel bundles, the belt tensioner tool is also used for bundling glass, pipe, material and fruit ..
  • High Quality: Made of high quality PP material, the banding strapping kit is durable and sturdy enough for long life time. You can create much tension in the bander, perfect for storage of pallets and heavy bundles. The packaging strapping kit would be strong enough or tight enough for shipping, it won't break ..
  • Sealer Tool: the sealer tool is long handles with excellent grip ensure the product?¡¥s safety and manageability. It is flexible enough to be used either vertically or horizontally, and provides maximum seal strength for your products without the operator having to exert too much effort.
  • Easy to Use: if you don't know how to use our strapping tensioner and sealer tool, please contact with us soo....
Check Stock

Edge Supply Maple Wood Veneer Sheet Flat Cut, 24\ x 96\

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” X 50' iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to w....
Check Stock

Tabazy CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit,

  • ...le ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. ).
  • Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width & 0.023" (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354" (9mm) in width & 0.031" (0.8mm) in thickness..
  • Package Included: 1Pcs Ear Clamps Pliers, 1Pcs CV Joint Ba....
Check Stock

OKVEQUIP Automatic Strapping Tool, Electric Packaging Strapping Machine, 2 4000mAh Battery Powered Banding Tools for 1/2-5/8 Inch Wide PP/PET Straps

  • ...ners for fixing. Our Strapping machine uses vibration to generate heat between 2 metal plates then the heat welds the straps together rather than using binding clips .Using our machines can reduce packaging costs.
  • [Automatic and Efficient]£ºYou just need to simply wrap the belts manually and tuck the ends into the banding machine's joints . the strapping machine will automatically tighten. weld ,strap, and cut . Polyester Plastic Strapping machine allows the operator to bundle a pack of timber in less than 1 minutes! Save time and Save labor.
  • [ Rechargeable Lithium Battery]£ºBattery Powered Strapping machine can work anytime, anywhere without the need to connect wires when fully charged. The product contains a 4000 mAh lithium battery that can be recharged 2000 times. Only charge for 90 minutes, then it can work outdoors more than 4 hours, and pack about 80-200 belts.The battery can be charged independently.
  • [Easy to Operate]£ºThe electric strapping machine plus battery is only 6.6 lbs, so it can be operated automatically with one hand. And you can bundle more belts in a shorter time, greatly improving work efficiency..
  • [High-quality and Wide application]£ºThe welding base plate of this strap belt banding machine is made of high-quality meta....
Check Stock

Mixed Variety Domestic Veneer Pack 5-6 sq ft/9 Sheets Or More

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this maple iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to wood, plywood,....
Check Stock

Cv Joint Ear Clamp Banding Tool Cv Boot Clamp Pliers Automotive Hose Axle Plier for  ATV UTV Most Cars Boot Clamps

  • Design:The CV joint boot clamps pilers are newly.With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively.Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • Funnction:This CV joint boot clamps pilers are key tools to fix the CV boots.They are used to bind, tenseion and sercure CV boot banding straps It helps you work morequickly.Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses..
  • MATERIAL:CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish.It looks much more shinning and it is totally rust adn corrosion resistant. Safe and durable..
  • APPLICATIONS: Use with any banding up to 2/5-inch (10mm) in width and vacuum hoses,for Ear-Type Clamp Crimping or Removal on for Audi, VW, BMW, Mercedess, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps,also be used for securing ATV UTV boot clamps..
  • CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Pliers ....
Check Stock

IDL Packaging S-290 Steel Strapping Tensioner for 3/8' to 3/4' Width Strapping — Heavy Duty Banding Tool for High Tensile Packaging — Feed Wheel Strapping Tool with Long Service Life

  • VERIFIED HEAVY DUTY STEEL STRAPPING TENSIONER S-290 is a manual steel banding tool ideal for flat packages. Has stronger and longer handle. It supports a range of steel (metal) strapping from 3/8 to 3/4 inches wide and up to 0.035 inches thick. This feed wheel strap tightener is made of durable steel and weighs 4.30 pounds.
  • HIGH TIGHTENING FORCE: The Steel Strapping Tensioner (also known as Steel or Metal Banding Tensioner) is used to strap heavy packages during storage or shipping. Perfect for banding individual goods into a single cargo unit, strapping pallets, etc.
  • SAVES TIME AND EFFORT: This manual banding tool works perfectly with packaging steel coils and does not require an external power source or attachments. Simplifies and accelerates operator's work, applies tension with little effort.
  • SIMPLE YET RELIABLE: The steel strapping tool has an ergonomic design, simple hand operation, and long service life. It is a reliable, simple to use, and convenient invention with an easy-to-turn handle for fast tension of the steel band. A pawl provided to a quick handle reposition to the base and easy steel strapping release.
  • ABOUT IDL PACKAGING: Responsible and considerate approach to all customer needs is the key principle of our service. We value our custom....
Check Stock