Best Stainless Steel Polishers

Rocaris 72 Pack Wire Wheel Brushes Set, Brass and Steel Wire Brush Set 1/8\ Shank for Rotary Tools Accessories Polish Clean Tools

  • ☑️Value Abrasive buffing wheels Pack - 60 pieces abrasive wheel with 1/8" shank and 6 grits, 10 pieces for each grit.
  • Brown 120Grit, Green 180Grit, Red 240Grit, Black 400Grit, Thin white wool felt buff wheel 1000Grit, Thick white cotton buff wheel 3000Grit..
  • ☑️Widely Usage - Used for DIY engraving, buffing, polishing. Ideal for removing rust/corrosion from any metal surfaces, easily achieve a smooth, uniform finish and conformability to irregular surfaces. Widely used in derusting, grinding, sanding, deburring, and stripping residue..
  • ☑️Broad Applicability - Fit for detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel, molds, medical equipment, jewelry, plastics, stone, rivets..
  • ☑️Warm Tips For Usage - It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
  • ☑️Universal Compatibility - Buffing wheels diameter:1 inch(25mm). shanks are 1/8 inch (3mm). Polishing wheels mounted 3mm mandrel fits most rotary tools, polishers, hand drill, etc..
Check Stock

Buffing Polishing Wheels 6in x 1/2in Arbor Soft (30Ply) / Fine (50Ply) / Medium (42Ply) / Coarse (50Ply) / Rough (5Ply) for Bench Grinder - 5pcs

  • 3 pcs 6" x 1/2" buffing polishing wheels with Shellac Leather(yellow only) Center Hole Reinforcement..
  • The 6 inch polishing wheel with 1/2" center hole fits most of the bench grinders and polishers. The polishing/buffing wheels will make your work easy and effortless.
  • The Buffing Wheels with High grade cloth is durable, extra long life ..
  • Buffing/Polishing Wheels are ideal for brass, aluminum, bronze, stainless steel, chrome, cast iron etc ,work with buffing compound.
  • [DIAMETER]: 6" Face, 1/2" Arbor Hole. H: 1" white cotton buffing whell 60 ply, yellow treated polishing wheel 42 ply.6" loose cotton buffing wheel, Material: 100% Cotton..
Check Stock

Buffing Wheels for Bench Grinder 6' Polishing wheels White (60 Ply) & Yellow (42 Ply) Buffing Wheel for Bench Buffer Polisher with 1/2' Arbor Hole 2 PCS

  • ⭐⭐ Two 6" x 1/2" buffing and polishing wheels with Shellac Leather Center Hole Reinforcement..
  • ⭐⭐ [Easy to install]:1/2" center hole fits most of the bench grinders and polishers. The Buffing/Polishing Wheels will make your work easy and effortless, improve work efficiency as well..
  • ⭐⭐ [Spiral Sewn Design]: The Spiral Sewn Buffing Wheels are sewn spirally from the center of the buffing wheels to the edge, the stitching style makes these polishing wheels tough and great for cutting and course buffing..
  • ⭐⭐ [Usage] Buffing/Polishing Wheels are ideal for brass, aluminum, bronze, stainless steel, chrome, cast iron and other metals. Rotating speed should be control below 3600n/min..
  • ⭐⭐ [DIAMETER]: 6" Face, 1/2" Arbor Hole. H: 1" (60 ply) Material: 100% Cotton..
Check Stock

Gyros Stainless Steel Mandrel, 1/8" Shank, Fits 1/4" Arbor Hole Size Strong and Vibration-Free. Used to Mount Accessories like Miniature Circular Saw Blades, Cut-Off Wheels, etc. onto Rotary Hand Tools.80-18105

  • High-Quality Stainless Steel --- this Gyros Professional Mandrel is made of high-quality stainless steel which is resistant to corrosion and staining, which increases mechanical strength Making it practically strong and durable..
  • Essential and Sturdy Accessory --- Compatible with most rotary tools, this mandrel provides a supportive and sturdy mounting base for sanding, buffing, or cut-off wheels and discs, saw blades, cutting blades, and mini rubber grinding wheels..
  • 1 Mandrel and 2 Washers Included --- Package Includes 4 Pieces - 1 mandrel shank 1 screw head and 2 washers. Fits a ¼” center hole, with a ⅛” straight shank that is compatible with most power rotary tools like the Gyros PowerPro Rotary Tools..
  • Wide range of Uses --- This is the ideal wheel mandrel for use with rotary tool attachments and accessories, Gyros is the preferred brand by many polishers, metal workers, jewelers, hobbyists, craftsmen, and professionals..
  • Proudly made in the USA, for your safety, Make sure that Mandrel is seated correctly with the rotary tool and tightened before use, and always use Gyros Mandrel with proper protective clothing, safety glasses, or face shield..
Check Stock

FPPO 50PCS Abrasive Buffing Polishing Wheel Set for Rotary Tools,Removal of Rust Deburring on Metal Surface with 3mm Shank,Mini scouring pad Brush Polishing kit(grit 320 red 50pcs)

  • These polisher abrasive buffing wheel are used for Dremel DIY engraving, grinding, polishing.Ideal for Removing Rust/Corrosions from Any Metal Surfaces,fit for detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel..
  • Buffing wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces.Widely used in derusting, grinding, sanding, deburring and stripping residue..
  • Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost,good wear resistance, durable and practical..
  • Note- The speed of the tool should not be too fast. It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
  • Buffing wheels diameter:1 inch(25mm).Shanks are 3mm（approximately 1/8" ).Polishing Wheels mounted 3mm Mandrel fits most Rotary Tools, Polishers, Hand Drill etc..
Check Stock

POWERTEC 71645 Assorted 8 Inch Buffing Wheels Set w/White 70 ply and Yellow 42 ply with 5/8 inch Arbor Hole 2 PK

  • INCLUDES: Yellow and White Buffing Wheels for bench grinder, 8 inch 5/8 arbor hole.
  • FUNCTION: Primarily used in combination to buff and shine metals, hardwoods and other materials using polishing compounds or rouges, offering reliably smooth and professional looking results.
  • FEATURES: A combination of grit types (fine and medium) offer you project versatility, along with an extra thick configuration for durability and added polishing surface - PLUS flaunts a spiral sewn design which firmly holds the ply formation together for balanced compound distribution pressure.
  • VERSATILE: Works exceptionally well for post sanding, metal and jewelry polishing, residue etching, blade/ custom knife making and other applications that require buffed or polished aluminum, brass, stainless steel, chrome and acrylic.
  • SPECIFICATIONS: White Cotton 8 inch Wheel Face (70 ply) with 5/8” Arbor Hole | Yellow 8 Inch Wheel Face (42 ply) with 5/8” Arbor Hole to accommodate most bench grinders, buffers and polishers.
Check Stock

Koblenz 45-0105-2 Replacement Pads & Brushes, Brown

  • Pack of two 6" replacement cleaning/polishing pads.
  • For use on all bare floor finishes to clean or polish.
  • Compatible with all Koblenz shampooers/polishers & with Kenmore & Regina shampooers/polishers using 6" attachments.
  • Includes 2 replacement plastic retainer clips.
Check Stock

TCP Global Superbuff 5/8

  • Extender bolt adapter has the standard rotary polisher 5/8" thread size.
  • Pad adapter is required to use with double sided pads and rotary polishers.
  • Use to extend spindle on polishers when using double-sided buffing pads.
Check Stock

Maxshine Machine Polisher Wall Holder/Rack - Single

  • Finest Polisher Holder gives you a holder on your polisher, provides space for all types of polishers.
  • Due to the use of rubber ring, polishers in the bracket to maintain soft and comfortable, will not damage the surface paint.
  • Just put your polisher on the holder, it's very convenient and can save some space for you.
  • Black finish coated with powder can resist rust and/or corrosion.
  • Iron, firm construction provides a safe place for your polisher.
Check Stock