Best Stainless Steel Cable Railing Kit

Lulultn Cable Railing Hardware, 30 Pairs Cable Railing Kit,Steel Cable Railing Kit,for 1/8 Cable Railing System, Adjustable Angle,T316 Marine Grade

  • Uses: This kit needs to be connected to the cable using a hydraulic crimping machine, it can be used for inclined stair railings or horizontal cable guardrails, deck railings and garden fences.
  • Material: The railing kit is made of high quality marine grade T316 stainless steel, which is rust-proof, more durable and beautiful and easy to maintain.
  • Features:Fit for 1/8″ stainless steel cable,This adjustable angle cable railing kit has 180° angle freedom adjustable base, suitable for outdoor or indoor use.
  • Dimensions: 1/8″ inner diameter, ideal for connecting to 1/8 inch stainless steel cable to wood post and metal post.
  • Packaging: 30 Pcs Deck Toggle Turnbuckles, 30 Pcs Deck Toggle Ends and 123 Pcs (3 spare) of stainless steel countersunk head screws and 1 pcs drill bit for wooden post, 1 pcs tightening rod,1 multifunctional small wrench ..
Check Stock

Senmit Cable Railing Post - Stainless Steel Square Fence Post for Deck Cable Railing System, Flat top 36\x 1\x 2\ Level Pre-Drilled, Matte Black

  • 【Create 36” height 1/8 cable railing systems】: Horizontal cable railing systems usually have cables attached to Stainless steel posts. This configuration creates clean lines that practically disappear into the background..
  • 【STRENGTH & ELEGANCE】: Matte black finishing - Pre-drilled holes on adjacent surface with standard 3” distance. Design for invisible cable railing system. Steel post can be installed on steps and staircases for patio, balcony, porch, garden, residential building, commercial office building, hotel, garage etc..
  • 【Made of High Quality 304 Stainless Steel】: High hardness, impact resistance, not easy to deformation. Excellent waterproof and corrosion resistance, strong anti-oxidation ability, durable for long-term exterior deck cable railing..
  • 【Easy to Install & DIY】: A flat top bracket is attached, suitable for flat bottom handrail, stable and simple. The holes on the post are 10.5 mm, Recommended Use Senmit invisible cable railing kit.
  • 【Accessories & Dimensions】: Include ① 1PCS Stainless Steel Posts - 2" × 1” × 35” (Rectangle width × Height).
  • ②1PCS Foot Cover ③4PCS M8 lag screws for wood surface.
Check Stock

WELWIK 5PCS 304 Stainless Steel Wing Nut Wire Rope Cable Wire Rope Clips Clamps Locking Device Wing Nut

  • These wire rope locking devices are made of high quality stainless steel with 3 / 32 inch and 1 / 8 inch diameter wires or cables. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
  • You will get: 5 packs of high-quality stainless steel wire rope locking devices..
  • Cable clamps are ideal for rigging ropes, wires and cables in unlimited applications, mainly for shading hardware kits and cable railing installation, rigging, temporary guardrail systems, fixed loads, ships, boats, hanging banners, flags and signs, and basically any cables involved..
  • The wire rope locking device is specially designed to clamp the wire rope on itself, which is very suitable for fixing the thimble of cables and ropes..
  • Perfect match of cable railing Kit. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
Check Stock

TooTaci Turnbuckle Wire Tensioner Kit,200ft Stainless Steel Cable Railing Kit,5mm Stainless Steel Wire Rope Vinyl Coated Cable,M6 Hook and Eye Turnbuckle Kit for Clothesline Kit,Hanging Kit

  • 【Cable Railing Kit】--comes with 200ft /5mm Aircraft Cable, 4 × M6 turnbuckle hook and eye, 8× Wire Rope Thimbles,8 × M5 wire rope cable clip, 8× Lag Screw Eye,8× M5 Aluminum Copper Swages (NOTE: Ferrules Size suitable for the 5mm cable (Don't strip off the coating prior to crimping the cables ) )..
  • 【Stainless Steel Aircraft Cable】-- vinyl coated +304 stainless steel wire rope ,7x7 Aircraft Cable, Breaking Strength 1,700 Lbs. This cable bare OD is 1/8"，coated OD is 3/16"；Not suitable for overhead lifting,Is not intended for aircraft use but is designed for industrial ,family and marine applications, suitable for clothes lines ,Tent wire , hanging outdoor lights strings, etc..
  • 【Installation Accessories】M6 Turnbuckle for Cable Tensioner made of stainless steel ,never rust,offers good corrosion resistance and rust resistance.
  • crimping loop sleeve are made of aluminum, hard and sturdy, Turnbuckle perfect for tightening up metal cable, trellis wire,clothes line tensioners,rope tightener,guy wire..
  • 【Application】-- Stainless Steel Turnbuckle and steel cable wire kits Strong and very durable for many uses, Suitable for something that requiring strong cable, such as clothes lines, traction rope, applied as sun shade ,tent hardware kit, ha....
Check Stock

Poodle Clipping and Grooming: The International Reference

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, dril....
Check Stock

Saiksa Black Cable Railing Hardware, Steel Cable Railing Kit for 1/8" Stainless Steel Cable Railing System, for Metal & Wood Post, Turnbuckle Tensioner and Fixed Terminal 10 Pairs

  • Hidden - With this cable railing hardware, it can be hidden in wooden or metal post railings to give a nice looking cable railing..
  • Cool Black - This cable railing kit is plated with a high quality black coating, which is wear-resistant and durable, will not fade, cool black beautiful..
  • Rust Resistant - These cable railing hardware are made of T316 stainless steel, which is rust resistant and durable for indoor and outdoor use..
  • For 1/8" Cable - This cable railing kit for 1/8" cable railing system, for metal and wood posts..
  • Items Include - 10pcs Turnbuckle Tensioners, 10pcs Fixed Terminals, 1 hex wrench..
Check Stock

Ingpro 80 Pack 316 Stainless Steel Left&Right Handed Thread Swage lag Screws for 1/8\ Decking Cable Railing Kit/Hardware,Wood Post Balusters (40 Pairs)

  • This cable railing kit（Single lag screw） made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • The angle of this professional Single-Screw cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence…；.
  • This cable railing hardware applies to standard 1/8" inch cable（OD）， Hydraulic crimper is required to connect this kit with the cable and the 4-6# dies is suitable.
  • The length of the screw is 2 inch, Pre-drilling screw holes is required before installation；The turnbuckle fully extended length is 10 inch and fully shortened length is 6-3/4 inch (Size details are shown in the figure).
  • This kind of cable railing fitting advantage：high quality、easy to install and looks clean..
Check Stock

TooTaci Wire Trellis Kit/Heavy Duty Picture Wire,1/16

  • Cable with Turnbuckle Kit-- Comes with 1/16 "PVC Coated Cable Wire Rope 50ft, 2pcs M5 Hook and Eye Turnbuckle, 4pcs M2 Wire Rope Thimbles, 4pcs M5 Wire Eye Straps, 8pcs M2 Aluminum Crimping Loop..
  • 1/16 Stainless Steel Cable --1/16 " Vinyl Coated Wire Rope Cable made of 304 stainless steel , This cable bare OD is 1.5mmCoated OD is 2mm.
  • Stainless Steel Cable Wire Rope offer corrosion resistance, durability and strength rather than galvanized wire.
  • cable wire with 7x7 construction consisting of 7 groups of 7 strands braided together.
  • stainless steel cable wire provide longer service time on project..
  • Turnbuckles for Cables Wire -- M5 Stainless Steel Turnbuckle Kit for 1/16" Wire Rope all made of 304 stainless steel ,Aluminum Crimping Loop Sleeve made of Aluminum ,offers good corrosion resistance and rust resistance, Turn buckles Kit for tightening up metal cable allow you to use in any weather and anywhere !.
  • Convenience for Operate:Need wire cutters for freely cut the length you want.
  • M2 Aluminum Crimping Loop just need use crimping tool to fasten and tighten wire.
  • and the stainless steel thimble prevent wire rope wears, extend the service time for project.and the turnbuckle is adjustable ,connection between the wood screw and wire.easy to install ....
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock