Best Stainless Fittings

Kegco 5 Gallon Ball Lock Keg - RubberHandle

  • 5 GALLON KEGS: This Kegco rubber handle home brew beer keg (also referred to as a Cornelius keg or a Pepsi keg). It can hold up to 5 gallons (19 liters). This keg is designed for use with ball lock keg couplers, and features a sanitary 304 grade stainless steel construction that makes it suitable for storing not only beer, but also wine, soda, kombucha, and cold brew coffee..
  • SANITARY STAINLESS STEEL CONSTRUCTION: This keg is constructed from sanitary 304 grade stainless steel, which is durable, easy to clean and sanitize, and highly resistant to rust and corrosion. This makes the keg suitable not just for storing and dispensing home brewed beer, but also for storing and dispensing wine, soda, kombucha, cold brewed coffee, or any other beverage that you’d like to dispense from a keg..
  • DESIGNED FOR BREWER CONVENIENCE: This keg has a permanently molded rubber bottom skirt and top handle that makes it easy to carry and stack, making it ideal for smaller breweries and home brewers with limited available storage space. The keg has a stainless steel lid that fastens tightly to the body and features an integrated pressure release valve that allows you to easily depressurize the keg..
  • BALL LOCK FITTINGS: This ball lock Cornelius Pepsi home brew beer ke....
Check Stock

SavvyCraft 4 Bow Bimini Replacement Top Canvas Cover4 Bow 96\ L 54\-60\ W Black Color

  • *Upgraded Bimini Top Parts - Casting from marine grade 316stainless steel , this external eye ends for bimini top fittings works for 7/8'' OD round tubes. Upgraded outside eye ends that stands up over time is a perfect choice to replace your plastic, nylon or broken fittings..
  • *Heavy Duty Stainless Steel - Stainless eye ends are well-built and highly polished for ultimate using. They are corrosion resistant, anti-rust, providing more durable solution for salty water environment..
  • *Easy to Install - Marine boat fittings are easy to assemble and install.Simply assemble jaw slide with eye ends to join the bimini top frame, then tighten screws to secure the inserted poles in place..
  • *Durable Design - 7/8’’ external eye end has shining polished looking and smooth touch, combining the modern design . Bringing this marine hardware for your lovely bimini will definitely surprise you for its outstanding product experience..
  • *Choose Right Size - Fits for 7/8'' OD round tube. One screw on each fitting measured 1/4''. the detail size refer to the left picture.Perfect replacement for marine hardware, widely used for boating, kayak, canoe, yacht,etc..
Check Stock

50Pcs Stainless Steel Thimble for 3/16 Steel Wire Rope Cable, M5 Rope Thimble Rigging

  • 3/16Inch THIMBLE: Package include 50Pcs M5 Wire Rope Thimble for 1/4”, 3/16” Steel Cable.
  • STAINLESS STEEL M5 THIMBLE: 3/16" thimble is made of 304 stainless steel, excellent corrosion resistance and rust resistance.
  • WIDE APPLICATIONS: Cable/Rope thimble is suitable for 1/4” and 3/16” diameter wire rope cable, widely used for lifting and connecting, wire rope fittings, marine hardware fittings and industrial rigging.
  • UNIQUE PROCESS: Polished edge and surface.
  • Stainless Steel construction can be used in indoor and outdoor applications.
  • DURABLE WIRE ROPE THIMEBLE: Every thimble is made of superior quality material with exquisite workmanship, strict craft and same Standard.
Check Stock

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...(OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconnect and push down on the correct ball lock (gas/fluid will flow once connected).
  • 5/16-inch barb connects your hose and screws/unscrews from fitting.
  • Included hose clamps tighten seal on hose and are winged for easier use.
  • PACKAGE CONTENTS: CO2 Ball Lock Disconnect Stainless Steel Keg Lock package includes (12) pieces total (6 per keg) – (2) ball lock liquid disconnect fittings, (2) ball lock gas disconnect fittings, (4) swivel nuts, and (4) hose clamps for your convenience.
Check Stock

PC4-M6 Pneumatic Fitting Push to Connect + PC4-M10 Straight Quick in Fitting for 3D Printer Bowden Extruder 20pcs

  • PC4-M6 fittings:thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M6 Fittings: made of Copper, PC4-M10 Fittings is made of stainless steel.
  • Easy to install:connecting by the outer thread of the quick fitting.
  • Compatibility: compatible with 1.75mm PLA ABS 3D printer.
Check Stock

Exchilerator Ready To Brew - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counter Flow Wort Chiller

  • EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
  • USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the Exchilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photo).
  • READY TO BREW MANIFOLD INCLUDED temp gauge, 1/2" s/steel tee, 1/2" s/steel close nipple, 1/2" s/steel ball valve,brass garden hose adapters and a roll of Teflon tape comes standard on the Maxx.( see photo of parts included).
  • 5 GALLONS 5 MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
  • COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check Stock

8FT Shark Industrial Premium PEX Tubing Ice Maker Water Connector with 1/4\ Comp by 1/4\ (8FT, White)

  • HQRP® Universal Premium Stainless Steel Refrigerator / Ice Maker Hose.
  • 1/4" FCM x 1/4" FCM stainless steel fittings.
  • Universal Fit - The 1/4" Female Compression Connections On Either End Are A Perfect Fit For Your Refrigerators / Ice Makers And Water Supply Lines.
  • CERTIFIED FOR YOUR SAFETY – These Hoses Are UPC (Universal Plumbing Code), NSF 61 (National Sanitation Foundation) Certified.
  • BURST PROOF - Designed To Last, Our Hoses Use True 304 Stainless Steel For Braided Outer Protective Cover Which Last Incredibly Long Time For Effective Protection Against Rust And Burst. Some Other Hoses May Not Use Real 304 Stainless Steel For The Braided Cover And Could Result In Rust Even Burst..
  • UNIVERSAL FIT - Our Hoses Connect To All Refrigerators / Ice Makers With Industry Standard 1/4" FCM (Female Compression) Connector Fittings. Easy Installation. Compatible with Samsung, Whirlpool, GE, Frigidaire, Eastman, Kenmore and all major brands..
Check Stock

MTM Hydro 28 Special Foam Cannon and Spray Gun with Large Reservoir and Adjustable Nozzle - High-Pressure Foam Washer for Cars Boats Roofs & More

  • This Kit includes: MTM Hydro Fittings and Components, only. Now includes 14mm & 15mm M22 Plug adaptors converted to 3/8” QC Couplers so it is....
  • ¼” Stainless Plug for PF22 Cannon Inlet.
  • Teflon tape for Installation of fittings.
Check Stock