Best St Blade Fuse Blockss

MUYI 2 Set Mini Blade Fuse Holder 14 Gauge Waterproof Pigtail Inline Fuse Holder with 15A ATM Fuses

Material:copper+rubber, Fuse holder dimension:38x25x13mm.
In-line fuse holder for mini blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A, ideal for car truck atv boat.
14 AWG thick red pigtail wire allow you to cut and splice it into any project, Wire length:30cm/12inches, Wire range:14 AWG.
Waterproof design, the rubber cap fits on tightly to protect any mini blade fuse inside.NOT easy to fall off or let water in..
Package Included: 2 X Mini Blade Fuse Holder and 2 X 15A Mini Blade Fuse.

Heavy duty 10AWG wire, better protection to the circuit..
Wire length: 6 inches 10 gauge wire, Fuse holder dimension: 41x35x15mm.
Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A ATC/ATO blade fuse..
Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside..
Package included 3 x 10 gauge fuse holder & 3 x 40A blade fuse..

Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits.
Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer.
Positive distribution bus with #10-32 stud.
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open.
Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels.

Standard Blade Fuse: 0. 75 x0. 74 x0. 3 Inch. Fuse Type: Blade. Material: Zn alloy/Plastic. Protect your car and your electrical device from short circuit, overload etc.Material:plastic.
10 Pack In-Line Fuse Holder: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit..
Safety Protection: Unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is an inline fuse holder extremely safe and reliable. Easy to use: Turn one fuse slot into two while providing protection for both circuits.
Suitable Fuses: Fits for 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19. 1 × 18. 5 × 5. 1 mm.
Package Include: 10 x 14AWG ATC/ATO Inline Fuse Holder and 120 PCs standard blade fuse+Puller.

ZOOKOTO Fuse block Automotive Blade 6Way fuse box ATC/ATO Blade Fuse Box 4 Fuses (5A/10A/15A/20A) Included.
Can be secured via 2 pre molded holes, each fuse holder is numbered to make fuse installation and identification as easy as possible.
Plastic and Metal Material, ZOOKOTO fuse box is made by tin-plating copper components, non-toxic and tasteless layer, good hardness and conductivity, durable construction, quality assurance.
Sturdy and robust construction,with transparent cover for dust and moisture protection,suitable for middle-sized blade fuses.
Cable connection via side, plated 6.3mm (standard) blade terminals. Convenient for examination and repair, easy to troubleshoot in outdoor.
widely used in airplane, subway, bus, ship, tanker, modified car, eco-car, etc.

10 AWG thick red pigtail wire allow you to splice it into any project..
Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm.
Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in..
Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine.
Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.

Dual-slot Fuse Holder: Provides 1 fuse holder to protect existing circuits and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise.
Easy to Use: No need to cut or splice wires to install your electronic accessories, convenient and easy to add an extra power or connection to the fuse box..
Superior Quality: All of them are made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity, durable and practical for your DIY application.
Multipurpose: You can use this dual-slot fuse holder when adding LED strips, radar detectors, dash cams, or any other electronic that requires direct wiring into the fuse box without cutting or splicing.
Wide Compatibility: 3pcs low profile mini fuses adapter with 5 Amp low profile mini blade fuse fits for Korean Cars.
4pcs mini fuse adapter with 15 Amp mini blade fuse fits for Japan and US Cars.
3pcs standard fuse adapter with 5 Amp standard blade fuse fits for European Cars.

♪ Premium Quality---Inline blade fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity.Protecting circuits and electrical equipment..
♪ Waterproof Protection---Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust proof..
♪ Heavy Duty 18 AWG Fuse Holders, Protecting circuits and electrical equipment. Easy to add additional circuits for cars, CD players, fax machines and etc..
♪ Easy Installation: Insert your fuse to the holder or you can change different votage fause,close the cover and then connect the fuse holder to the circut.
♪ Package Included: 2 X Mini Blade Fuse Holder and 2 X 5A Mini Blade Fuse.

140pcs mini fuse in total, 20pcs for each values blade fuse: 5A 7.5A 10A 15A 20A 25A 30A. Different AMP in different color and AMP numbers carved on the fuse for easy recognition..
Blade Group: APM, ATM. This mini fuse assortment can protect your car and your electrical device from overload or short circuit..
These mini fuse widely used in car, truck, SUV, camper, motorcycles, boat, home general digital camera applications etc..
Comes with a carrying box and a helpful photographic diagram of the fuses locations on the back of the cover..
Two blade fuses pullers are included to help you easily and safely replace the fuse.***Please confirm the /Size/Voltage/Current/ before order***.