Best Ssd For Raspberry Pi 4

UCTRONICS Desktop Cluster Enclosure for Raspberry Pi, Up to 4 Raspberry PIS and 2.5" SSD, Front Removable Trays, 12cm LED Cooling Fan for Raspberry Pi 4B/3B+/3B

Not only compatible with Raspberry Pi 4B and 3B, all Raspberry Pi B-type boards are compatible..
Hassle-free installation of 2.5" ssd, add your additional storage anytime, anywhere. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
With a 12cm LED fan, silent, beautiful, and able to provide sufficient cooling for 4 Raspberry Pi. Note: This fan is not a PWM fan, can not control the air speed and temperature..
Front pull-out, easy to replace one of the Raspberry Pi, easy access to the Raspberry Pi's I/O ports and SD card..
The mounting plate also has a reserved SD card slot, so you can access and replace the SD card from the front side simply by using the SD card adapter(ASIN: B09CKRDFTH)..

Check Stock

UCTRONICS Pi Rack Pro for Raspberry Pi 4B, 19\ 1U Rack Mount, Support for 4 2.5\ SSDs, Secure Shutdown, 0.96\ Color Display for Raspberry Pi

【For Raspberry Pi 4B】Designed specifically for the Raspberry Pi 4B, the Raspberry Pi rack allows you to install up to 4 RPis, making it easy to build small Raspberry Pi clusters..
【4 SATA shields】No need for SATA-to-USB cables, just plug in 4 2.5" SSDs for additional storage capabilities. The board is also reserved for a fan interface, which supports external 2.54 2pin fans to cool the Raspberry Pi. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
【Safety Shutdown】4 power buttons can be pressed to achieve a soft shutdown, and then press to power on. No longer worry about the damage caused by a hard shutdown on the Raspberry Pi..
【0.96" LCD display】graphical display of RAM/Disk/Temp usage, IP address always on, and also supports custom display content..
【19" 1U Rack Mount】19×5.72×1.75 inch(482.6×145.4×44.5mm), the pi rack can be installed into the cabinet or placed on the desktop. This solution not only beautifies your cabinet and desktop but also keeps dust out..

Check Stock

GeeekPi Retroflag NESPi 4 Case Kit with Raspberry Pi 4 4GB RAM Board, Pi 4 Case with SSD CASE, HDMI Splitter Switch & Cooling Fan & Heatsinks & USB Wired Game Controllers for Raspberry Pi 4 Model B

【Compatibility】NESPi 4 CASE specifically designed for Raspberry Pi 4 Model B (2GB, 4GB, or 8GB).
Raspberry Pi 4 Model B 4GB Motherboard is Included.
【Safe Shutdown and Reset, Functional LED power indicator】It will be more safer when shutdown and reset (Scripts are necessary). The Pi 4B indicator is visible after installation..
【SSD CASE(NOT including SSD)】This NESPi 4 Case comes with NES Cartridge style case for 2.5'' SSD, easy to install your SSD, enjoy an overall better computer experience!.

Check Stock

Geekworm X820 Metal Case + Power Control Switch + Cooling Fan Compatible with Raspberry Pi 3B+/3B & X820 V3.0 SSD&HDD SATA Storage Board & X735/Rock64

Case Size(Installation): 11.3cm x 9.1cm x 6.2cm / 4.45inch x 3.58inch x 2.44inch.
Note: the Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch)..
This is metal case with super mute cooling fan kit for X820 V3.0 SSD/HDD storage board user, very easy to install, perfectly compatible with Raspberry Pi 3 Model B+/3B/2B/B+/Rock64 & X820 V3.0 Board&X735 Board..
Note: Raspberry Pi, X820 board, SSD/HDD and power adapter is not included in the packing list..
Installation Video refer to Geekworm WiKi search X820.
Power switch with beatiful LED indicator to control the power of X820 V3.0 and the Raspberry pi.
Support super mute cooling fan, hundreds of round cooling holes on both side of the case, almost no weekeness for the bluetooth and WIFI signal..

Check Stock

UCTRONICS SSD Mounting Plate for Raspberry Pi 1U Rackmount, Compatible with All 2.5-inch SSD, with SATA Cable, USB Cable and USB Keystone Jack

You will be getting: 1 pcs SSD mounting plate, 1 pcs SATA to USB 3.0 cable, 1 pcs USB 3.0 male to male cable, 1 pcs female to female USB 3.0 keystone jack, and 1 pack of accessories..
Designed for 1U rackmount: This SSD mounting plate is specifically designed for UCTRONICS 1U rackmount ASIN B08F9X528J, compatible with any 2.5-inch SSD (Not included)..
High Speed: Come with a SATA cable and a USB 3.0 cable allows you to get significantly faster data transfers by connecting with your Raspberry Pi 4 B, 3 B/B+, and other B/B+ boards..
Expand the Storage for Your Raspberry Pi: Add a 2.5-inch SSD to your rackmount, which can make you easily add storage, perform backups, create disk images, implement data recoveries, and transfer data to your RPi..
Easy installation: 2 slots on the bottom for mounting the rack, 4 slots for fixing the SSD, each hole of the mounting plate can be perfectly aligned with the rackmount and cover the slots where no raspberry pis mounted on the rack, make your rack more manageable. Note: The thickness of the SSD cannot exceed 9mm..

Check Stock

GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B

This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).

Check Stock

GeeekPi Raspberry Pi 4 SATA Storage, Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Expansion Board X825 V2.0 USB3.0 Shield (Only for Raspberry Pi 4B)

Only For Raspberry Pi 4 Model B, supports up to 4TB 2.5 inch SATA hard disk drives (HDD) / solid-state drive (SSD), Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 board.
X825 Case,please refer to ASIN: B093WYWVRX.
Power supply request: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output , Please use high quality DC 5V 4A power supply, highly recommend to use ASIN: B07YJDS71K(With TUV,FCC,RoHS,CE Certifications). If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD or not recognize the HDD/SSD ..
OS compatiable: All Raspberry Pi operating systems.
USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller.
Package Includes:1 x X825 V2.0 Expansion Board, 1 x USB 3.1 connector ,1 x Mounting Screws Pack.
Note: The Raspberry Pi 4B board and the 2.5" SATA HDD/SSD are Not Included.

Check Stock

Geekworm Raspberry Pi 4 Dual SATA X883 V1.2 Dual 2.5 SATA HDD/SSD Expansion Board UASP Supported for Raspberry Pi 4 Model B

[Compatibility] For use with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB ONLY,compatible to use with X735(ASIN: B07R45W1LN) for power management function..
[HDD/SSD Requirements] Supports single or dual 2.5" SATA HDD/SSD working at the same time. The thickness of HDD/SSD does not exceed 11mm..
[Power Supply] Power supply: 5Vdc +/-5% , ≥4A.
Ensure use high quality PSU, recommend ASIN: B07413Q5Y4..
[Note] 1.As with all SSDs, new media must be formatted before use. 2.Not include Raspberry Pi, SSD/HDD or power adapter..
[User Manual] refer to Geekworm WiKi and search X883. Allows booting OS from your HDD/SSD for faster app opens, web server and file management..

Check Stock

GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board, 18W QC3.0 Power Supply for Raspberry Pi 4 Model B

This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
The 0.96 inch OLED screen was already mounted on the case.28x64pixels, default I2C address: 0x3C.
M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x QC 3.0 Power supply,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).

Check Stock