Best Square Carbide Insert

8PCS Carbide Cutters Inserts Set for Wood Lathe Turning Tools - Include 12mm, 15mm and 8.9mm Round, 11mm, 14mm and 15mm Square, 30mm and 28mm Diamond with Sharp Point, Supplied with Screws

• Replaceable Handle：Match 2pcs black aluminum alloy handle. Of course, you can also DIY the handle you like.
• Material: aluminum alloy, STAINLESS STEEL, Tungsten Carbide.
• Mid Size Tool Details: CNC machined from square STAINLESS STEEL, making them stronger, stiffer and less likely to roll than round shaft tools, Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
• Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life.
• Easy to use: greatly simplified learning curving when turning, No complicated angles to learn and remember, For all skill levels woodworking enthusiast or DIY.

Wood Turning tool Carbide Tipped Working Lathe Tools Combo Set Include Finisher Rougher Detailer For Pen Bowl Making,Set Of 3

• Combo Set Include: 3 Pieces Wood Turning Tools(Mid Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key.
• Dimension：Length of Tool Bar 5.91″(150mm) ，Length of wood handle：9.84″（250mm ），Overall length 15.75″(400mm).
• Indexable Replacement carbide insert design:matched with Carbide Cutter (Square15×15 × 2.5mm-R50-30°，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point).
• Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening，for wood hobbyist or DIY or carpenter.
• Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.

GBJ SRDPN2020K10 (20mm*125mm) + RPMT10T3 45° Lathe Turning Holders Lathe Turning & Profiling Tool Holder for Round Carbide Inserts RPMT10 RPMT08 (SRDPN2020K10 + R5 Inserts)

• OSCARBIDE Turning Insert Holder TSDNN 2020K 12, Square Shank,Rigid Clamp, 125mm Length,10.3 Width.
• TSDNN 2020K 12 is a new T-type double style tool holder,it can be accurately, strongly clamp the carbide insert,which is the upgraded style of DSDNN 2020K 12 turning holder.
• Turning holder is made of Nikel Coated HSS,carbide insert is made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
• Our External Turning Holder which using the newly developed new double clamping structure, The clamping plate is designed with positioning, anti-turning function and high clamp Tight and rigid, high positioning accuracy, high stability, reliable Now the blade is fast, strong, accurate clamping, is straight The best choice for hole negative Angle blade clamping..
• Used for external turning, roughing to finishing, but also for internal turning when chip evacuation is good..

Pack of 5 Wood Turning carbide Cutter inserts Combination Set,For YUFUTOL Or Other Popular Wood Turning Tools(Include Square, Square With Radius,Diamond,Round Shape Cutters) Supplied with Screw

• This Combination Carbide Inserts Set Will Give The Best Selection For Your Wood Turning Job,It Fits YUFUTOL Brand Wood Turning Tools Or Other Similiar Brand Tools..
• Size And Shape Included: Square(14mm 15mm),Square With Radius (15mm-2″ Radius),Round(16mm), Diamond Shape With Radius Point..
• 90* Square and 2″ Radius Fix Full Size Rougher, Round Cutter Fix Full Size Finisher or Hollower, Diamond Cutter Fix Detailer.
• All The Carbide Insert Cutters Supplied With Screws, All You Need Is Find The Matched Wood Turning Tools Before Start Your Turning Job.
• Advantages：Significantly Improved Efficiency And Turning Results, Save Time and Cost.

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

• APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
• Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
• Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
• Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
• These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.

Shars 3/8\ x 6\ SCLCL Left Hand Indexable Boring Bar with CCMT Insert 404-2478 P]

Carbide Tipped Woodturning Tools DW-9 Carbide Wood Lathe Tools 6pcs Hollower Rougher Detailer Finisher Sander Made of Stainless Steel and 3pcs aluminium alloy Handle and Carbide Cutters and Sandpapers

• CNC machined 12mm solid stainless steel，Not easy to rust.
• Indexable Replacement carbide insert design，Indexable give you fresh edge for maximum cutter life, And You can find matching carbide tipped insert(DW-9) in my Amazon store.
• Replaceable Handle：Match 3pcs aluminum alloy handle.
• Tool is designed with a square shaft making it easy to keep tools flat on the tool rest.
• Total Length：22 Inches，Tool Length：10 Inches，Handle Length：14 Inches.

PVC Pipe Reamer PVC Fitting Saver PVC Socket Saver with 0.315 Hex Shaft 1-½-Inch and 2 Inch Head Aluminum for Water Lines Drain Lines Vent Lines

• Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC....
• Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..
• High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
• Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
• Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
• It is recommended to use a variable-speed electric drill....

Accusize Industrial Tools 4 Pc 90 Deg Indexable End Mill Set with Apkt11t3 Inserts, Cutter Diameter Includes 1/2'', 5/8'', 3/4'' and 1'', 0028-8416

• 90Degree Cutting angle Nickel Plated. Screw down insert.
• All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
• Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
• with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
• Uses APKT / APHW / APKR_APht / APMT insert (sold separately).