Best Spool Hydraulic Valve

Chief G Series P80 Hydraulic Directional Control Valves - Hydraulic Speed Control Valve - 3 Spool, 21 GPM, 4 Way 3 Pos Spring Center, SAE 10 Inlet and Work Ports, SAE 12 Outlet Ports, 3625 PSI

Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
5 Spool Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
Double Acting - This control valve comes with 5 spools and SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
High Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM.
Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, log splitters, and more.

... provides the engine with valve timing optimized for both low and high RPM operations. The VTEC solenoid actually allows oil to flow to the internal galleries of the overhead camshaft. This means that the housing of the solenoid is holding back full engine oil pressure. A spool solenoid valve can direct the flow of hydraulic fluid. The valve is made up of spools that rotate or slide to block and open channels in a hydraulic system..
This VTEC Solenoid Spool Valve Fits for 2003 - 2011 Honda Element 2.4L, 2002 - 2009 Honda CR-V 2.4L, 2003 - 2007 Honda Accord 2.4L, 2002 - 2006 Acura RSX 2.0L, 2002 - 2005 Honda Civic 2.0L..
Customers can find the product you need accurately according to the OE number. OE part number: 917-224, 15810RAAA03, 15810RAAA02, 15810-RAA-A01, 15810PPAA01, 15810PNEG01, 15810-RAA-A03, 917224, 15810-PNE-G01, 15810-RAA-A02..
While a VTEC solenoid rarely goes bad, problems with VTEC not engaging properly are extremely common. Most of the time incorrect wiring is to blame, but occasionally something even smaller is the culprit. When a solenoid is bad, may mean the solenoid's plunger is either mechanically stuck in a closed position and therefore always making contact which may eventually cause the starter motor to burn its windings..

SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..

Durable Quality: Come with 2 spool and #8 SAE O-ring in/out ports, with cast iron construction for long-time use..
Double Acting: Hydraulic control valve for operating double acting cylinders..
Spring Return: All spools standard come with spring return, which can return to the neutral position..
High-Efficiency: The relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM..
Widely Used: Fit for small tractors, tractors loaders, log splitters, and etc..

Double Acting - 2 Spools monoblock for double acting cylinders..
Durable Quality - This hydraulic directional control valve comes with 2 spool, with cast iron construction for long-time use..
Features - Open Center 4-way 3 position Tandem Spring Center..
High-Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM(50L)..
Wide Application - Fit for small tractors, tractors loaders, log splitters, and etc..

Widely Used: Comes with 2 spool and #8 BSPP in/out ports, with cast iron construction for long-time use.
Double Acting: Hydraulic control valve for operating double acting cylinders..
Spring Return: All spools standard come with spring return, which can return to the neutral position..
High-Efficiency: The relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM..
Widely Used: Fit for small tractors, tractors loaders, log splitters, and etc..

Medical grade PVDF material, safe and nontoxic.
Normal performance under -30 ℃ to 150 ℃, excellent chemical and hydrolysis resistance, outstanding ozone, UV and weather resistance..
Size Reference:These Check valves measures approx. 4 mm in diameter and 38 mm/ 1.41 inches in full length, please make sure of our size when you buy it..
Perfect for the hydraulic system to prevent reverse flow of material, or compressed air for pneumatic system to prevent.
Flow smoothly, small fluid resistance, good sealing performance, short spool stroke, small off valve impact force, attractive appearance and high reliability..

Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
2 Spools Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
Double Acting - This control valve comes with 2 spools and #8 SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, and more.
Max Pressure: 3600 PSI, Inlet Port: SAE 10, Outlet Port: SAE 12, Working Ports: SAE 10, Fluid Temperature: 5 to 176℉, Valve Type: 4 way 3 positions, Mounting: 3 bolts m8 needed.