Best Split phase Motors

Single Phase to 3 Phase Converter My-PS-7.5 Model Suitable for 5HP 3.7Kw 15 Amp 200-240V 3 Phase Motor DPS Must Be Used for One Motor Only Input/Output 200V-240V Digital Type

  • Drive 3 phase motor(220V) with 1 phase (Rated Voltage:3 phase 220V ± 10%).
  • The failure rate was even lower frequency operation.
  • Excellent start-up torque / The size is small & easy to install.
Check Stock

CBB60 Motor Capacitor,AC 250V 120uF 50/60Hz,1pc

  • Metallized polypropylene film roller structure improves performance of the product and makes it durable..
  • Reliable insulation performance, excellent electrical properties and safe explosion-proof devices..
  • Heat resisting, low leakage, low loss and low impedance..
  • Current with good impact resistance, strong overload ability..
  • Suitable for the start-up of single-phase motors with frequency of 50Hz and 60Hz, such as air conditioners, compressors and motors..
Check Stock

6Pcs L298N Motor Drive Controller Board DC Dual H-Bridge Stepper Motor Control and Drives Module for Arduino Micro:bit Smart Car Robot UNO MEGA R3 Mega2560

  • ★L298N as main driver chip makes strong driving ability and strong anti-interference,dual-channel h-bridge driver working mode creates higher working efficiency,,drive stepper dc motors to work.to avoid damage the voltage stabilizing chip, please use an external 5v logic supply when using more than 12v.
  • ★Dual-channel H-bridge driver working mode creates higher working efficiency..
  • ★To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • ★Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • ★L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

Room Air Conditioner Replacement Parts TitanPro TOCF7.5 HVAC Motor Run Oval Capacitor. 7.5 MFD/UF 440/370 Volts

  • Product Name:Air Conditioner Starting capacitor.
  • This operating capacitor is suitable for start-up of single-phase motors with frequencies of 50 Hz and 60 Hz, such as air conditioners, compressors and motors..
  • Package Content: 1 Pcs x 30uF CBB65 Capacitor.
Check Stock

ACEIRMC 8pcs L298N Motor Driver Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power MEGA R3 Mega2560

  • When you are driving voltage (above logo for the 12 v input, can actually accept input range is 7 to 12 v) for 7 v to 12 v, can make to onboard power supply 5 v logic, when using the onboard after 5 v power supply, interface of + 5 v The power supply does not input voltage, but can yield 5V voltage for external use..
  • The chip manual proposes to support 35V, but according to the book When the maximum voltage is applied to the maximum voltage of 298 conservative applications to 24V, for example, the motor with a rated voltage of 18V shall be driven.
  • Great for for Arduino DIY Smart Car Robot Power MEGA R3 Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits.
  • No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
Check Stock

POWERTEC 71443 Single-Phase Magnetic Switch Box 220/240V 3 HP 18-26 Amp Heavy Duty CSA Certified Multi Color

  • INCLUDES: 1-Phase Power Switch Box (magnetic starter) with wiring diagrams and printed instructions.
  • FUNCTION: Commonly used with textile machinery, drilling, table saws and other mechanical equipment, this electrical switch box directly controls your....
  • RATING: Single Phase, 220-240 volt, 18-26 amps, rated for 3 horsepower motors, CSA Certified.
  • COMPATIBILITY: Magnetic starter mounts directly to the equipment and works with popular brands such as the Delta Unisaw, Grizzly Shaper, and many....
  • EASY TO USE: Features color coded ON/OFF push button control.
Check Stock

Usmile GX140 140mm Drone Frame Designed for Rumcam Split Mini 2 Caddx Turtle V2 1080P HD FPV Camera Micro 3 inch Quadcopter Frame Carbon Fiber FPV Racing Drone Frame (GX140)

  • ★Durable: This 3 inch drone frame is made of high-quality 3K Carbon Fiber, 4mm bottom plate,2mm upper plate designed to sustain multiple crashes and abuses.
  • ★Creative: Twin Tower design allows it accommodate two flight towers, one in the front and another in the rear end of the frame, 25mm aluminum standoffs provide plenty of space to comfortably put all the components inside..
  • ★Powerful: Perfect combination with 13** 14** 15** 16** brushless motors with 12*12mm mounting holes including 1306 1407 1507 1608 motors, please note it doesn't support 11** series motors. Make no mistake, it can pump out huge energy In a split second..
  • ★Specially designed for Rumcam split mini 2 Caddx Turtle V2 1080P HD FPV camera , capturing great FPV footage with no props in the view.
  • Package Includes: GX140 frame *1, camera mount, four motor protectors, and 3-in-1 holder for antenna and power cord.
Check Stock

CBB65A-1 Motor Capacitor,Cylindrical Shaped Run Capacitor AC 450V 30uF 50 / 60HZ for Motor Pump Air Conditioner Motors Refrigerator

  • Metallized polypropylene film non-inductive roller structure improves performance of the product and makes it durable..
  • Reliable insulation performance, excellent electrical properties and safe explosion-proof devices..
  • Heat resisting, small size, large capacity, low loss and good stability of capacitance..
  • Current with good impact resistance, strong overload ability..
  • Suitable for the start-up and operation of single-phase motors with frequency of 50HZ and 60Hz, such as air conditioners, compressors and motors..
Check Stock