Best Split Bearing

M8 Stainless Steel Split Spring Lock Washers, 8mm ID, 12mm OD,18-8 (304) Stainless Steel, 150pcs (M8)

  • Package Included: 150 x Split Lock Washers. Inner Dia: 0.31" / 8mm.
  • Split Lock washers apply greater bolt tension per unit of applied torque as well as a hardened bearing surface adding to a more uniform torque control. .
  • These lock washers resist loosening caused by vibration and corrosion..
  • Washer's surface are smooth can reduces friction between the fasteners, preventing isolates, preventing loosening and dispersion pressure..
  • Ideal for electrical connections on household and commercial appliances, automotive and marine uses in which the power source has a threaded/bolt-type connection..
Check Stock

DAYUAN 12pcs Bearing Separator Puller Set, Heavy Duty 5 Ton Capacity 2\ and 3\ Bearings Splitters Puller Kit

  • Practical: Use the Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
  • Versatile: For a wide variety of pulling jobs.
  • Can remove bearings from a shaft, split bearings, and separate flywheels.
  • Can be used separately or with other pullers or tools.
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity.
  • Black oxide finish for corrosion resistance.
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization.
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw.
Check Stock

Century 2 HP Pool and Spa Pump Motor, Permanent Split Capacitor, 3450 Nameplate RPM, 230 Voltage, 56Y Frame - B855

  • SQUARE-FLANGE MOUNTING: Single-phase pump motor is a part of the Century pool and spa pump motors with Square Flange series.
  • CONTINUOUS OPERATION: Features a permanent split capacitor and a switchless design.
  • SEALED BALL BEARING: Stainless steel threaded shaft with sealed ball bearing with a 50-degree Celsius ambient temperature.
  • THERMAL PROTECTION: Motor features automatic thermal protection and non-reversible counterclockwise pump end.
  • FEATURES: Includes a 56Y frame-square flange and open drip-proof ball bearings.
Check Stock

M10 Stainless Steel Split Spring Lock Washers 10mm ID 16mm OD,18-8 304 Stainless Steel 100pcs M10

  • Package Included: 100 x Split Lock Washers. Inner Dia: 0.39" / 10mm.
  • Split Lock washers apply greater bolt tension per unit of applied torque as well as a hardened bearing surface adding to a more uniform torque control. .
  • These lock washers resist loosening caused by vibration and corrosion..
  • Washer's surface are smooth can reduces friction between the fasteners, preventing isolates, preventing loosening and dispersion pressure..
  • Ideal for electrical connections on household and commercial appliances, automotive and marine uses in which the power source has a threaded/bolt-type connection..
Check Stock

Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Bearing Removal Tool Set 16 Pieces

  • 16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
  • HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
  • the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
  • WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
  • EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
  • for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
  • BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check Stock

Lew's (LLS10066UL-2) Laser Lite Spinning Reel and Fishing Rod Combo, 6-Foot 6-Inch 2-Piece IM6 Graphite Blank, Size 100 Reel, Right or Left-Hand Retrieve, Silver

  • Speed Lube for exceptional smoothness and performance in all weather conditions.
  • Graphite reel seat with cushioned stainless steel hood.
Check Stock

ABN Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit

  • Practical: Use the ABN Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
  • Versatile: For a wide variety of pulling jobs.
  • Can remove bearings from a shaft, split bearings, and separate flywheels.
  • Can be used separately or with other pullers or tools.
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity.
  • Black oxide finish for corrosion resistance.
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization.
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw.
Check Stock

Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set 16PCS

  • 1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
  • 2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
  • the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
  • 3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
  • 4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
  • for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
  • 5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check Stock

PSI Woodworking LSR3 Wood Lathe Steady Rest

  • Fully adjustable wheels easily adapt to any position or spindle diameter down to 1/2"..
  • Mounts in the channel of any split bed or double rail lathe..
  • Compatible with Jet, Delta, and Turncrafter Pro Midi lathes with extension beds..
Check Stock