Best Spline Shaft

CTS 500K Push Pull Short Shaft Audio Taper Potentiometers - Pair 2X - Includes Wiring Diagram

High Quality CTS Push Pull Pot - brass bushing and shaft.
Short Shaft (3/8" bushing height), 24-tooth fine spline shaft.
Double Pole Double Throw allows modification including coil splits, coil taps, phase shifting.
Not intended for use with import guitars using metric components.

【Package Included】: 2* Wheels (with tire, rim, tube), 2* Pillow Block, 1* Axle Assembly, 1* T8F Chain, 1* Sprocket, 1* Brake Disc, 1* Brake Master Cylinder Caliper Assembly..
【Shaft Size】: The Shaft overall length: 740 mm (29.13 inch), Spline to Spline: 452 mm (17.79 inch), the thickest part of the shaft is 22 mm(0.86 inch), Bearing Position: 20 mm(0.78 inch)..
【Tubeless Wheel Size】:Diameter-13.0 inch , Width- 3.93 inch , come with 4.1-6 tire, 6" rim, and inner tube..
【Wide Application and Durable】: These have almost all the rear-end parts necessary needed, Suitable for DIY rebuild drift bikes, go kart quad, or trikes..
【Suitable】: fits 6 inch wheels (rim) with 3 bolt pattern and 3 inch bolt to bolt space..

Guaranteed Exact Fit for easy installation, backed by a three year, unlimited mileage warranty.
100% BRAND NEW, premium ISO/TS 16949 quality - tested to meet or exceed OEM specifications.
Engineered for superior durability, backed by a three year, unlimited-mileage warranty.
This brand new gearbox will fit and function just like OEM, with the same steering ratio as well.
Fits all 2003 and 2004 Ford F-250 and F-350 Super Duty pickups, plus 2000-2002 models with a 36-spline output shaft.
that covers most 4WD models, while 2WD trucks have either a 32-spline or 36-spline output..

TAOT CUSTOM Series Pots -High Quality Brass Bushing & Brass C-clip reinforced Shaft Part #450S500K TAOT.
Short Split Shaft (3/8" Height X 3/8" Diameter Bushing).
24 Tooth Fine Spline .236" Diameter Shaft.
Audio Taper suitable for both Volume & Tone controls.

Application: Prop fits SUZUKI/Tohatsu/BRP Johnson DF50/60/70/90/100/115/140HP with 15 spline tooth shaft. Please check your engine shaft spline tooth before purchasing. Prop comes with pressed in rubber bush as pictures showing. Please refer to product description area for Detailed Engine Application. Install the new propeller with exist thrust washer, spacer, nut of engine lower unit shaft. Prop comes with new split pin. Please feel free to contact us for installation guideline..
HIGH STRENGTH:The innovation of aerospace casting technology to marine aluminium propellers is now a reality, boasting hybrid casting of strontium, aluminium and titanium that are far stronger and durable than ever before. Performing 280MPA tensile and 220MPA yield strength which much stronger than traditional die-casting and squeeze casting props..
EXTREME ANTI-CORROSION: Props are robotic powder-coated using AkzoNobel patented anti-corrosive coating powder. More important that it is environmentally safe..
EXCELLENT PERFORMANCE: Props are designed based on OEM blade geometry, with appropriate cupping and camber added. Excellent bow lift, acceleration and top speed as well reducing slip,increasing bite..
QUALITY GURANTEE: Don't be limited by policy. We offer 12 months free repl....

✅【Fit Models】EZGO brake hub fit 1982-up electric golf cart and 1982-1993 2-cycle gas golf cart. Not fit 4 cycle gas EZGO golf cart..
✅【Product Feature】There is a 3/4-Inch center hole with a 24-tooth star spline, the hub is held in place by a castellated nut (5/8-Inch x 18tpi) and a thick (118-Inch) flat washer..
✅【Replace OEM Part】This EZGO TXT rear brake drum/hub is a replacement for the earlier hub & drum and has the star spline instead of the straight key.Replace OEM# 19186G1, 19186G1P, 17082G2, 17298G1..
✅【Note】 This EZGO TXT drum brake will NOT operate with a keyed axle/hub interface. Hub spline and Rear Axle Shaft Spline should be matched tight. When one of them is wear out, both of them should be replaced at the same time. Other wise the hub spline will strip soon..
✅【Package Content】1*EZGO rear hub with drum washer, 4* chrome lug nuts. Any problem please feel free to contact us, we are there for YOU !.

【Applicable Models】Golf cart brake drum hub assembly fits perfectly 1982-up EZGO Electric Vehicles, not suitable for gas models. This brake drum/hub assembly replaces Part# 19186G1P.
【Durable Quality】It has a 3/4-Inch center hole with a 24-tooth star spline instead of the straight key. When replacing this brake drum, check the Hub assembly as well..
【Warm Tips】Hub spline and Rear Axle Shaft Spline should be matched tightly. If one of them is wear out, both of them should be replaced at the same time, otherwise the hub spline will strip soon..
【Package Included】2X EZGO TXT drum brake, 8X chrome lug nuts, 4X flat washer and 2X bolt pin, 1X instruction.
【Customer Service】 XUANYUDG0769 is a professional manufacturer for golf cart accessories. We’re committed to providing excellent quality products for global customers. If you have any question about installation or any other questions, please contact us via amazon. We will provide 24-hours online service..

5/8" Diameter Stright Keywed Shaft 1 1/4" Long or S9 9 Tooth Spline Shaft - 2 Bolt A Mount.

Shaft Usage: 6.35mm to 6.35mm / 0.25 to 0.25 inch.
Feature: Spline shaft with coiling clamping.
Flexibility of coupling shaft removes stress between the motor and driving components..
The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty..