Best Spiral Point Taps For Copper

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.

【6 Different Sizes】 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements, can use for tapping various threads.
【Designed with Drilling Function】 They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
【Spiral Flutes Design】 These taps are designed with spiral flutes and the chip clearing process would be better.
【High Hardness & Rust Resistance】 These taps are made by high speed steel and surface finished by nitriding for high hardness and rust resistance.
【Widely Application】 Suitable for drilling and tapping on wood, plank, plastic, soft metal like aluminum, iron, etc. Ideal for hole drilling, tapping and deburring/countersinking applications.

★ 【HIGH QUALITY】 These valves are made of high speed steel and present a finish of surface by nitriding for a duration and a resistance is elevated to the rust for a prolonged service life..
★ 【DIFFERENT SIZES】 There are total of 6 pieces of taps in different sizes from M3 to M10 which you can use to tap various files.
★ 【SPECIAL DESIGN】 The taps are designed with spiral splines and the chip reteying process would be better.
★ 【FUNCTION】 These are taps with drilling function, used to drill hole and cut new threads at the same time, you will get smooth tapping experience with them.
★ 【WIDE APPLICATION】 These taps are used on a machine to perform tapping, usually more precise because human error is eliminated. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron and so on..

Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....

There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
Taps are designed with spiral flutes and the chip clearing process would be better.
These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.

Practical Function: There are a total of two taps to facilitate the alignment of the tap and the tapping hole to ensure that the tap and the hole are perpendicular to each other and tapping smoothly. It also has a smoothing effect on the thread (removes burrs). Suitable for thick steel, rubber, aluminum, copper, and wood..
Good Helper: Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Can make new threads or re‑thread damaged or jammed threads.Number Of Threads: 3. Thread Tolerance Grade: 0.014. Through Hole/Blind Hole: Through Hole. Material: High speed steel. Tap Style: Straight groove. Thread Code: Standard thread..
Suitable for: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc. Appropriate addition of coolant (e.g. water) can extend the service life when tapping..
Replacement for: The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing. Mainly used for hand use, tapping the vast majority of materials in through holed conditions..

This tap and drill bit set produces a thread that is strong and easy to tap.
High-carbon steel plug taps are great for general-purpose threading.
135° split-point drill bits give fast, precise drilling.
Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.

- These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance..
- There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads..
- Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap..
- They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them..
- These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair..

Tap shoots chips ahead of the cutting action reducing loading and clogging in the flutes.
They are recommended for use in through or blind holes.
Allow for chip accumulation in the bottom of the hole.
Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics.