Best Special High Pressure Melt

Lace The Front Wigs: The Ultimate Guide On Achieving Perfect Hair Everyday And All You Must Know About Front Wigs

  • A Must-Have Bands for wigs!! This elastic bands are used to melt your lace, Lays Down Edges and keeping baby hair in place so your wigs can look as natural as possible..
  • Features a velcro strap which makes it easy to adjust the tightness,No need to tie knots, super easy and comfortable to Use.
  • You can also wear our melting band when sleep, work out or take a shower to prevent wig from slip off and lace from moisture..
  • Made of ultra-fine polyester fiber and high elastic latex, so it is super soft and stretchy to use.Allows enough pressure to press the lace into the scalp. It is effective on both glued and glue-less installs/wigs..
  • Easy to Apply: You can simply apply the lace melt band after glue your wig down, wait for it to set in your style for 5-10 minutes and then remove the band slowly from the hairline.
  • ❤Tip for a perfect lace melt: To avoid the glue, lace spray or gel turning white and sticking to the band, please wait for your glue to dry majority of the way and then apply the lace melting band, you will get a perfect install and the lace will melt into the scalp..
  • Size: width: 3.5 cm, Length: 22.5 inch. 4 PCS for each pack.
Check Stock

Premium Quality Fabric Iron-on Patches Inside & Outside Repair Decorating Kit 12 Pieces Size 4.8' by 3.7' (9.5 cm x 12.4 cm) (White 2)

  • rear side is covered with the strongest hot-melt adhesive film. Patches made in EU using high quality materials..
  • It will take only a few minutes to repair or decorate your outfit, as only an iron is required. Preheat your iron to the maximum, then place the patch on the desired spot and iron over the patch with pressure for 60 seconds. You don’t have to sew patch on or use further fabric glue, hot-melt adhesive film on each patch is very durable by itself. CAUTION: Do not apply patches using hair straighteners or other heating objects, only use an iron..
  • You can place the patches on the outside of a garment. Use scissors or die-cut machine to cut the patches to the size or shape you want.
  • package includes several templates to help you decorate your favorite clothes. You can also apply patches from the inside of a garment, this way the shiny rear side of the patch shows through the hole. After a couple of washes, the shiny glue will disappear and it will look like normal fabric..
  • Applied patches are washable at high temperature.
  • they can also be tumble dried on a high temperature setting. Even if applied patch starts to peel off after some time, simply re-iron the patch again. One patch can be re-ironed at least 3 times, even after washing. To prevent....
Check Stock

Manelord Glue Gun - 100W Hot Glue Gun with 10Pcs High Adhesion Hot Glue Sticks for Car Dent Repair, Home Improvement, Quick Daily Repair and DIY Small Craft Projects

  • Quick Heating System: 100W hot melt glue gun, Featured with premium thermal heating system, high quality ceramic PTC heating chip, only takes 3 minutes to preheat and release glue..
  • Improved Process: Glue gun has independent power switch, status indicator, anti-drip/anti-back glue, Protective Nozzle Cover, stable stand, vent design, etc..
  • Safe and Efficient: Ergonomic design and suitable size make it comfortable to handle. Made with high quality plastic engineered to sustain high pressure and temperature without deforming. Heavy duty glue gun has inbuilt safety features and fuse that prevent overheating to make it extremely safe to use..
  • Universal Tool - Hot melt glue gun is perfect for home and office, also can be used with metal, wood, plastic, glass, paper and more. Included quite strong adhesive 10 hot melt glue sticks (Diameter: 11mm/0.43").
  • Customer Service - Please read the product description and manual carefully before use. Contact us through Amazon for any questions, We will help you solve your issues. (Note: Please do not trust any third-party information to avoid being deceived, We only service through Amazon.).
Check Stock

Shell Rotella (SD) Special Duty Grease (550049926)

  • Non-melt grease that will not melt at any temperature.
  • Contains the technical fine grade Molybdenum Disulfide (Moly Powder).
  • Optimum performance range is -30°F to 500°F (-34°C to 260°C).
  • Withstands up to 500,000 pounds per square inch of pressure.
  • Contains SWEPCO's proprietary anti-friction and anti-wear additive, LUBIUM.
Check Stock

CV-2 Synthetic Grease Cartridge Case/6-14oz

  • Non-melt grease that will not melt at any temperature.
  • Contains the technical fine grade Molybdenum Disulfide (Moly Powder).
  • Optimum performance range is -30°F to 500°F (-34°C to 260°C).
  • Withstands up to 500,000 pounds per square inch of pressure.
  • Contains SWEPCO's proprietary anti-friction and anti-wear additive, LUBIUM.
Check Stock

Ultra Lube 10314 Moly EP Biobased Grease- 14 oz. Cartridge

  • Non-melt grease that will not melt at any temperature.
  • Contains the technical fine grade Molybdenum Disulfide (Moly Powder).
  • Optimum performance range is -30°F to 500°F (-34°C to 260°C).
  • Withstands up to 500,000 pounds per square inch of pressure.
  • Contains SWEPCO's proprietary anti-friction and anti-wear additive, LUBIUM.
Check Stock

20 Kg Propane Melting Furnace Precious Metal Melting Gold Silver Copper Brass Bronze Light Duty Forge

  • 【UNIQUE TO THE WHOLE NETWORK】 LSMIITTH -F15KB The air chock on this burner can control the air and flame at different gas pressure,each burner is around 100,000 BTU ,fast melting can save 50% time and 20% gas cost.
  • Unlike other single burner furnace , the flame can only heat one side of crucible strongly , the flame can only reach to 1/2 wall of the crucible, the opposite side has no flame. It means you need longer time and more gas to melt whole pot of metal, LSMIITTH dual burner solved this problem by heating 2 sides of crucible at the same time.Unlike other burners, LSMIITTH uses a replaceable bell burner head, because it is connected by threads, You can replace the parts yourself..
  • 【Durable AND EFFICIENT INSULATION Materials】Furnace body is made of steel( 1.5mm thick), superior strength and durability..Outside Dimensions : 12" diameter x 15" height (30cm x 37cm).
  • Inner Dimensions: 8" diameter x 10"Height (20cm x 24cm).
  • Furnace body and lid are fully lined with 2 inch of ceramic fiber insulation. Furnace floor lined with 3 inch of ceramic insulation and firebrick . (which can withstand high temperatures of 2600F (1425° C) , and is a replaceable inner wall material..
  • 【READY TO GO MELTING KIT】Propane melting furnace can be heated up to 2....
Check Stock

ROADGIVE 97PCS Auto Body Dent Repair Tool Kit, Paintless Dent Repair Kit with Golden Lifter, Slide Hammer T-bar Dent Puller, Bridge Puller, Suction Cup and Glue Gun for Car Dent Remove Tools Kit

  • 【Premium Dent Removal Kit】The material of car dent puller is made of high quality alloy+plastic.They won’t break when taking a normal range of pressure. Each paintless dent repair kit is made of a special hardened material, is robust and durable and has a lifespan of several years..
  • 【Efficent Dent Repair】All dents are easily removed with our innovative auto body repair tools ! It contains all the tools needed to repair dents of all sizes and shapes.T-Bar puller for large dents, bridge puller for medium dents and gold dent puller for small dents..
  • 【EASY OPERATION】Our car dent repair tools are very easy to understand and manipulate, helping you save a lot of money compared with the auto repair shops. Our pullers pass mechanics test and they are easy to handle..
  • 【PHYSICS DESIGN】Using the principle of leverage to design the dent puller is ergonomic, the bridge dent puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, efficiently and labor-saving..
  • 【Dent Puller Kit】1xBridge Dent Puller(with 8xaccessory), 1xT-Bar P....
Check Stock

Glue Dots Low Profile Super High Tack Glue Dot, 1/4\ Diameter x 1/64\ Thick, Case of 4000 (GD112)

  • Includes: 4 1500-count rolls of Dot Shot Pro adhesive.
  • Glue Dot: A safe and easy adhesive solution, our sticky dots are double-sided instant-bonding adhesives perfect for home, office and school projects.
  • Multipurpose Patterns: Our invisible, instant-bonding Glue Dots can be used to secure product orientation, attach samples or business cards, create multi-packs, repair hot melt failures,secure labels, outserts/inserts.
  • Pressure Sensitive: No special solvents, water, or heat are required to activate our clear Glue Dots.
  • Increase productivity by eliminating drying and curing time.
  • Portable Packaging: Dot Shot Pro dispenser is lightweight, portable, and easily integrates into any work environment.
Check Stock