Best Soundboard Brace Angle Jig

Drill Jig for Angled Holes-Portable Aluminum Drill Guide for Straight Holes 30 45 90 Degrees with 4 Sizes Guide Holes Durable Drilling Jig for Cable Railing Deck Stair Handrail

Multiple Sizes: The drill jig for straight holes has four sizes for each drilling angle, which are 3/8”(9.52mm), 5/16”(7.93mm), 1/4”(6.35) mm), 3/ 16"(4.76mm), compatible with most cable railing lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling..
Accurate Three Angles: The drill jig for angled holes allows you to drill 30°, 45°, and 90° angle holes for wooden stair railings and deck posts. The angles are fixed with no deviations, and you can quickly drill accurate 30°/45°/90° angle holes with an impact drill in the posts and railings, saving you time and effort and getting the work done quickly..
Hard Metal Material: The drill guide for straight holes is set with ultra-hard chrome-plated steel sleeves, which are wear-resistant, sturdy, and durable, no need to worry about being worn when drilling. The main body of the railing drill guide is made of high-quality industrial grade aluminum alloy, hard and durable, with CNC anodized surface, wear-resistant and corrosion-resistant, and clear markings..
Scope of Application: This drill guide for angle drilling can be used with locking C clamps and F clamps to prevent the drill jig from wobbling while drilling, and al....

Check Stock

20 Pcs Stainless Steel Corner Braces, FineGood 10 Pcs 40 x 40mm 90 Degree Right Angle L-Shaped Bracket Joint and 4 Pcs Plat Braces Fastener for Wood Shelf Cabinet Chair Table, with 80 Screws

FUNCTION: The corner brace is to reinforce corner joint. Use a drill bit while drilling screws into woods..
RIGHT ANGLE BRACE: 90 degree angle bracket, can be used to build a frame, serve as a corner connected, like fastening chair, wooden table, wooden bed, windows, shelf, furniture, etc..
PLAT STRAIGHT BRACE: The flat braces can be applied in many different places to enforce flat angle joints, such as chests, screens, windows and beds..
MATERIAl: Stainless Steel. Sturdy and Durable. Heavy duty and thick design..
SIZE: 16 Pcs Right Angle Brace (40 * 40 * 16 mm / 1.55 * 1.55 * 0.65 inch). 4 Pcs Plate Straight Brace (76 x 16 x 2mm/2.99x 0.62x 0.07inch).

Check Stock

14Pcs Pocket Hole Jig Kit, 15 Degree Woodworking Inclined Hole Jig with 6/8/10mm Drive Adapter for Woodworking Angle Drilling Holes, Angle Carpentry Locator Jig

PERFECT DIY TOOLS: Made of Aluminum, not rust or break.Mini pocket hole jig set, perfect for DIY home projects or professional and general commercial use.
DUAL POCKET: Dual Pocket 15° Bit Angle, 2-ways holes for accurate screw joints.
EASY TO USE: Convenient and easy for quick drilling inclined holes to hide the screws in wooden furniture.Easily change between the multi-size drill 6/8 /10mm, used for any type of wood, position and angle..
PORTABLE DESIGN: Easy to carry, no need for bulky and expensive tools, a perfect DIY tools for home woodworking..
WHAT YOU GET: Pocket hole jig comes with pocket hole jig, 3 sizes drill (6/8/10mm) ,3 sizes stoppers (6/8/10mm), 3 sizes sleeves(6/8/10mm)..

Check Stock

Kreg Pocket-Hole Jig 720PRO with the KHC3 Face Frame Clamp KHCRA Right Angle Clamp and the SK04 Starter Pocket Hole Screw Kit

...ludes the most-commonly used Kreg Screws, from 1" Pan-Head screws for building with 1/2"-thick material, through 2 1/2" Blue-Kote screws for building bigger projects outdoors--all housed in a durable, divided case..
This bundle includes the Kreg 720PRO Pocket Hole Jig the KHC3 3 inch Face Frame Clamp the KHCRA Right Angle Clamp and the popular SK04 Pocket Hole screw starter kit..

Check Stock

Chamberlain 0.5-hp Smart Chain Drive Garage Door Opener Works with MyQ with Built-in WiFi

UNIVERSAL: This garage door opener hanging kit is universal to hang any brand of garage door opener.
PERFORATED ANGLE: Rigid 13G perforated angle sticks alow you to safely hange your new garage door opener from the ceiling.
INSTALLATION: Easily adjust placement with pre-punched hols (1" on center, 25/64 diameter) or the angle can be cut down as neded to fit.
GARAGE DOOR OPENER HANGING KIT INCLUDES: (1) 26”L ceiling brace: 1.25” x 1.25”, 13G angle, (2) 20”L vertical dropdown pieces: 1.25” x 1.25”, 13G angle, (1) 14”L cross brace: 1.25” x 1.25”, 13G angle, 13G angle, Hardware and instructions included.

Check Stock

Tormek T-4 Hand Tool Kit (Tormek T-4 Original + Tormek HTK-806 Hand Tool Kit) - sharpener that includes all the necessary jigs for knives, axes, scissors, and carving tools (US Version)

A complete sharpening system for hand tools – this bundle combines the Tormek T-4 water-cooled sharpening system with the HTK-806 hand tool sharpening jig and accessory kit.
The HTK-806 hand tool kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, and comes with its own storage case.
The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
Includes: WM-200 Angle Master, PA-70 honing compound, SP-650 stone grader, SVM-45 knife jig, SVM-00 small knife jig, SVM-140 long knife jig, SVA-170 axe jig, SVX-150 scissor jig, SVS-38 short tool jig, TC-800 storage case. It’s a sharpening shop in a box!.
Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..

Check Stock

Aluminum Alloy Door Hinge Jig ，Door Hinge Hole Woodworking Hole Opener Slotting Locator ，Hinges for Wood Cabinet Kitchen Door Lock Installation

...k body, under the aluminum positioning pressure plate and precise scale, the slot can be slotted according to the hinge you need to install..
Note: The hinge jig needs to be used with a trimmer. After grooving, all the corners are rounded. It needs to be trimmed to a right angle and then installed (with a trimmer). Only shallow grooves can be opened..

Check Stock

MoMoSun Sink Bridge Whetstone Holder Sharpening Stone Base Adjustable Expandable No-Slip (Grey)

... the grinder with a track style base and can be readily folded out of the way for freehand grinding if so desired. It can also be completely removed by loosening the large wing knob and sliding the jig from the track base..
Another great feature is that the jig can be adjusted forward and backward for just the right angle. Some aftermarket and expensive tool rests don’t move and adjust in this fashion. This can be very limiting your ability to be accurate with your angles. The platform straddles wheels up to 1" wide. The Jig also now includes internal lock washer for even more stability!.
The unique ratcheting handles lock the adjustable rest solidly in position and can be moved out of the way after locking to keep from accidentally bumping them. You can easily move the tool rest from one grinder wheel to another or quickly remove it from the bench when not needed for grinding. Some assembly required. The bench top wood mounting screws are included..

Check Stock

Adjustable Replacement Tool Rest Sharpening Jig for 6 inch or 8 inch Bench Grinders and Sanders Includes a Pivoting Miter Slide and Flat Miter Slide for Easy Tool Honing

...f the grinder with a track style base and can be readily folded out of the way for freehand grinding if so desired. It can also be completely removed by loosening the large wing knob and sliding the jig from the track base.
Another great feature is that the jig can be adjusted forward and backward for just the right angle. Some aftermarket and expensive tool rests dont move and adjust in this fashion. This can be very limiting your ability to be accurate with your angles. The platform straddles wheels up to 1" wide. The Jig also now includes internal lock washer for even more stability! The bench top wood mounting screws are included..

Check Stock