Best Soft Solder

3 Pcs Solder Sucker Desoldering Vacuum Pump Solder Removal Tool

【High Quality and Powerful Sunction】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively and you can use your thumb to reset and suck..
【One-Handed Use Design】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
【 Sturdy and Perfect Tool】Worke good to remove existing solder from a circuit board, heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering..
【Great Solder Removal Tool】 The solder sucker can be used for broad place, a must have excellent solder sucker which fits nicely in your tool box..
【Lifetime Satisfaction Guarantee】If you're not happy we're not happy! If we can't make it right and you are not satisfied for any reason, we will gladly and promptly refund your purchase price. We promise! Click "Add to Cart" now..

Check Stock

yzc Rosin core solder-Solder wire 63-37 Solder flux, Electronic solder, diameter 1MM, net weight 20G, portable storage tube, suitable for electronics, circuit boards, ICs, etc. DIY(Rosin core solder)

【rosin core solder wire:】Solder flux solder wire with special formula of high-quality tin ingots from Yunnan, China and high-quality rosin..
【Tin wire parameters:】 rosin solder wire Tin 63%- Lead 37% (Sn63-Pb37)..
【Soldering wire specifications:】rosin flux content 1.8%, rosin solder wire 1.0mm (0.0394inch), 20 gm (0.044lbs), gross weight 28 gm (0.0617lbs),Tin pen is suitable for carrying in a pocket..
【Low melting point:】 361F/183C. Easy to solder, smooth flow, fast soldering speed and firm solder joints..
【Electronic solder Application:】Rosin core solder wire for-solder for electronics Have Very good soldering ability, especially the repair of electrical equipment such as circuit boards,electronics，IC, home improvement, cable TV, radio/sterro,toys etc DIY..

Check Stock

TurboTorch 0386-0150 T-2 Tip Lp No. 2

Copper tubing size capacity, propane Gas (soft solder, Silver solder): 1⁄8-1⁄4.

Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
Please check the size carefully before purchasing.
Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....

Check Stock

Stahl Tools SSVT Variable Temperature Soldering Station

[HIGH PRECISION & LARGE POWER]: The solder station has large power and high precision. Power: 60 watts, temperature adjustment range: 194°F 896°F / 90°C 480°C, temperature stability: ±2°F / ±1°C. It’s fast heating up and takes only 6 seconds to reach the melting point of 392°F solder wire. It’s perfect welding equipment..
[FEATURES]: Anti-static design & ESD safe, LED display, PID temperature control technology, fast heating, sleep mode & wake function, °C/°F conversion function, indicator for tracking temperature and temperature compensation, digital temperature correction, reusable ceramic core. Ergonomic solder iron handle..
[LONG WORKING LIFE]: Protective cord shield, silicone heat shield, and reusable soldering iron extend the service life. Internal 60 watts thermal ceramic soldering iron heater, welded firmly, long service life, easy to replace and purchase. Stainless steel soldering iron prevents accelerate aging of materials for high temperature work, improve heat dissipation and prolong heater life..
[SOLDERING KIT INCLUDED]:60-watt digital soldering station with side-mounted solder roller holder (removable), built-in soldering iron holder to ensure soldering iron safety, cleaning Sponge to remove solder residue for future use, 2....

Check Stock

Ultra-Thin Solder Wire 0.01in (0.3mm) Rosin Core Flux 2.5, Lead Free Solder Wire Sn99 Ag0.3 Cu0.7 Flow 50g Electronics Soldering Electric Solder

ULTRA-THIN- the solder wire diameter is just 0.01inch, designed to solder the tiny component, just enough to add enough solder on those small MSD pads.
LOW MELTING POINT- solder fast melting at 419F ( 217 Deg.C), suitable all soldering tools.
IMPROVED SOLDER- this 0.3mm solder wire content high quality allow Sn99 Ag0.3 Cu0.7, provides excellent conductivity, eliminate soldering issue, reduce labor cost.
APPLICATION- good for fine solder work, soldering for electronics equipment.
LEAD FREE- Unlead solder, excellent performance for electric soldering project.

Check Stock

VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1

Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!.
Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily.
The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free.
Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up.
The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!.

Check Stock

Hakko CHP TR-30-58 Medium Soft Wire Cutter, Chamfered Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 8mm Jaw Length, 14 Gauge Max Cutting Capacity

Product 1: Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire.
Product 1: 2.5mm heat-treated carbon steel construction provides durability and long life.
Product 1: Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.
Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.
Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
Product 2: Available with standard or anti-static bobbins.

Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..

Check Stock