Best Socket Tray Holder

ABN Flexible Tool Tray - Silicone Rubber Tools Organizer, Non Slip Tool Holder Tray for Organizing Parts, 10in x 9in

[Organize Your Tools]: Whether you are performing maintenance on your vehicle or crafting a DIY project, use the ABN Orange Rubber Tool Tray Flexible Non Slip Tool Tray to hold parts and tools for you.
Use this silicone tool tray for your workshop and garage.
[No More Slippage]: Save time and energy using this parts tray to prevent the dropping of your parts and tools.
Non-slip smooth backing of tool tray holder allows you to place holder on curved or slanted surfaces.
Ridges in center compartment keep tools in place.
[Sections for Your Tools]: Keep your tools and small parts on hand while you work on your vehicle or are woodworking.
Flexible nonslip tool holder has space to hold your wrenches, nails, sockets, screws, and more in the included 4 notches, 2 large pockets, 3 small pockets, 5 socket holes.
[Flexible Silicone Rubber]: No need to worry about this non slip flexible tool organizer falling apart after extended, repeated use.
Silicone parts tray allows for the easy cleanup of grime, dirt, and oil.
[Perfect Size]: Silicone tool tray measures 10 x 9 x 1 inches (26 x 22 x 2cm).
Set rubber work tray in your toolbox, your car's engine compartment, or even the wing of your plane.
Package includes 1 flexible non slip tool holder for your workshop.

Check Stock

ABN Black Aluminum SAE Socket Holder Rail 3-Piece Set – 1/4, 3/8, 1/2 Inch Socket Rails and 16 Clips Tool Organizer

STAY ORGANIZED: Use the ABN Black Aluminum Socket Rail Tool Socket Organizer Tray SAE 3-Piece Set – 1/4″, 3/8”, 1/2″ Inch Socket Holders Organizers and 16 Socket Clips to better organize your tool parts.
This socket set organizer accepts both shallow and deep sockets.
USE ANYWHERe: Use the 17-inch x 0.82-inch (43cm x 2cm) rails as socket organizers for toolboxes drawer to organize your toolbox, wall socket organizer as you mount on a wall vertically or horizontally, socket tray as you set it on your workbench, or tool drawer organizer as you store it in a drawer.
1-inch x 0.2-inch (25mm x 5mm) keyhole slots to mount on any surface (hardware not included).
SAE standard 1/4-inch, 3/8-inch, 1/2-inch socket drives.
BUILT TO LAST: Tool socket holder rail constructed from aluminum with black finish for strength and longevity.
Socket clips constructed from heavy-duty plastic.
End caps constructed from soft plastic (caps removable).
Set holds up to 48 sockets (16 sockets per rail).
SECURE YOUR TOOLS: Spring-loaded ball bearings on each clip offer a firm and secure hold.
Your sockets attach to plastic clips which are friction fit to the aluminum rail.
The clips are held in place by soft plastic end caps that are also friction fit to the rail.

Check Stock

Gripty (Duo-Pack) | PREMIUM Silicone Tool Tray | Flexible | Multi Purpose Mat | Portable Tool Box Organizer | No Magnets | Easy Clean Up | (ORIGINAL Green) (One Pack)

[PREMIUM SOCKET ORGANIZER] Mayouko Heavy duty durable drive socket holder is made of premium quality material (ABS rails and clips, steel tray), enables the long term usage..
[SPRING LOADED CLIPS] The socket clips on these rails are built with spring loaded ball bearings to hold your sockets firmly and securely..
[HIGH CAPACITY] This organizer for sockets is equipped with 52 x 1/4" clips, 60x 3/8" clips, 48 x 1/2" clips which holds up to 160 sockets: ..
[QUICK AND EASY SOCKET ORGANIZATIONA] Quick and easy way to organize cluttered toolboxes and work areas with this hassle-free holder for sockets..
[High Compatibility] Works With All Brands Of Sockets Like Snap-On, Craftsman, Mac, And CASOMAN Just To Name A Few, hold all shallow or deep, Metric or SAE (Inch) Drive sockets..

Check Stock

OEMTOOLS 22383 4 Piece Black Aluminum Socket Tray Set, Trays for 1/4”, 3/8”, and 1/2” Drive Size Sockets, SAE Socket Tray, Socket Organizers for Toolboxes

MODULAR DESIGN: Organize your sockets however you want in trays and rearrange whenever needed.
Quickly identify the right tool every time with this tool socket organizer.
Additional 1/2 inch socket organizer tray to accommodate any socket collection.
FORM WITH FUNCTION: Rubber feet protect your workspace from scratches.
Non-magnetic OEMTOOLS socket tray designed to prevent metal dust buildup.
Anodized black finish creates a sleek toolbox appearance.
NEVER MISS A BEAT: Adjustable socket organization studs slide easily from either direction.
The socket tray SAE system guarantees your sockets stay secure while allowing for one-handed removal.
Our socket set organizer is designed to meet your needs.
INTUITIVELY CRAFTED: The billet aluminum sockets organizer construction is lightweight and long lasting.
Subtle socket set tray organizer design means they fit easily in any storage drawer.
TRAY DETAILS: 1/4” socket organizer tray set measures 9” x 3”.
(2) 1/2” socket holders organizers for tool box measure 12” x 3”.
The socket organizer for tool box drawer has adjustable studs.

Check Stock

Lisle 40120 1/4" Magnetic Socket Holder

Twenty-six socket compartments allow you to keep your 1/4" standard and deep sockets in one convenient holder.
Holds sockets up to 5/8" or 15 millimeter.
Design of holders leaves sockets exposed for easy identification.
Powerful magnets securely hold sockets in tray, and tray to any steel surface.

Check Stock

240pc SOCKET STORAGE TRAY RAIL RACK HOLDER SET 1/4 3/8 1/2 RED BLACK BLUE 17-1/2" LONG 3 TOTAL TRAYS 6" WIDE

【BEST CHOICE OF SOCKET ORGANIZER】 - The WXTOOLS socket holder is at the forefront of socket storage innovation. Easily organize all your sockets.
【HIGH CAPACITY】 - This organizer for sockets is equipped with 26 x 1/4", 30 x 3/8", 24 x 1/2" drive ball bearing clips that will hold and secure your sockets under heavy conditions.
【PREMIUM QUALITY】 - Engineered with high grade annodized aluminum rails and impact resistant ABS clips with steel ball bearings, built with durability for your long-term use.
【WIDE USAGE】- Works With All Brands Of Sockets Like Snap-On, Craftsman, Mac, Matco, etc. A great gift for man with this hassle-free holder for sockets.
【WHAT YOU GET】- The socket tray with 26 x 1/4", 30 x 3/8", 24 x 1/2" drive ball bearing clips. Makes your tools easy to find, easy to remove for use, and easy to replace.

Check Stock

OEMTOOLS 23127 Portable Magnetic Socket Organizer 3 Pack, 1/4 Inch, 3/8 Inch, And 1/2 Inch Drive Socket Organizer, Magnetic Socket Tray Set of 3

Your Socket Solution: House up to 76 sockets with this magnetic and portable socket organizer 3 pack.
Always have the sockets you need at your fingertips.
Secure Grip: Powerful rare earth magnets in each socket organizer tray holds components securely in place.
Never worry about small tools falling out or getting lost.
Durable Construction: This magnetic socket storage set works as hard as you do.
Each portable socket organizer is designed with high impact plastic and has an integrated handle.
Always Accessible: Take your sockets anywhere the job takes you with this magnetic tool organizer set.
Fit them in your drawer, toolbox, truck, or even hang them on the walls of your garage.
Specifications: Magnetic socket holder 3 pack.
Compatible with 1/4 inch, 1/2 inch, and 3/8 inch drive standard, impact, deep, or shallow sockets in both metric or SAE.

Check Stock

OEMTOOLS 22487 3 Piece Metric Magnetic Socket Organizers, Socket Organizers for Toolboxes, Socket Organizer, Magnetic Socket Holder, Black Tool Box Organizer

MOBILE ORGANIZER: Moving sockets about the garage or shop with our metric magnetic socket organizer set is easy.
Attach our metric socket organizer tray to metallic lifts, rolling carts, and more.
Works upside down on tricky jobs without spills.
QUICK SORT STORAGE: Identify sockets easily with the magnetic socket holders.
Our magnetic tool organizer is numbered for ease-of-use.
This 3-piece metric set comes with 75 slots, in 1/4 inch, 3/8 inch, and 1/2 inch sizes for deep and shallow sockets.
EFFICIANCY ENHANCMENT: OEM TOOLS magnetic tray's sizing system makes your shop or garage extra efficient.
Find the right socket for your pneumatic ratchet or power tools immediately with our metric socket set organizer.
STRONG MAGNETIC HOLD: Get creative with our magnetic socket tray on ferrous surfaces.
Sticks to tool chests, rolling carts, lifts, you name it.
Our magnetic socket tray holds sockets firmly.
Handy tool box socket tray/tool chest organizer.
DURABLE SURFACE PRESERVER: No one likes damaged surfaces.
Our metric socket organizer magnetic rubberized backing keeps your metallic surfaces scratch free.
OEM socket organizers are made with high-impact plastic to survive your hectic garage or shop.

Check Stock

WORKPRO 3/8-inch Magnetic Socket Organizer Set 2-Piece SAE & Metric Socket Holders Holds 52 Standard and Deep Sockets for Tool Box Tool Carts Sockets Not Included

Powerful Magnetic to Store Sockets Anywhere: Magnetic socket organizer keeps your sockets neatly stored in drawers or mounted on the side of a tool cart. The sturdy ferrite magnet base has a strong magnetic force to keep your socket in the tray and secure the tray to any ferromagnetic surface..
High Capacity & Clear Specifications: The WORKPRO Magnetic Socket Organizers accommodate both SAE and metric sockets, and can store up to 52 metric and SAE sockets (6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"). Bring all the sockets together in one organizer for efficient and orderly work..
Scratch-Free Mounting: Choose this magnetic socket organizer to protect other items in your garage or tool room from fraying with the storage sleeve. The material of PP+PVC soft magnet can avoid scratches to the greatest extent, and the magnetic base with rubber at the bottom will not scratch any of your tool surfaces..
Fit for Standard & Deep Sockets: Each magnetic socket holder is designed to securely store deep and standard metric&SAE sockets. Multiple size options allow your sockets to take their place and keep your work environment....

Check Stock