Best Socket Pipe Fitting

Ultimate Washer 18709 3/8-Inch Stainless Steel Quick Connect Pressure Washer Adapter Set, Max Pressure 5000 PSI Rating

  • STAINLESS STEEL 3/8” Female Pipe Thread x 3/8” Female Quick Connect Plug.
  • STAINLESS STEEL 3/8” Female Pipe Thread x 3/8” Female Quick Connect Socket.
  • Withstands MAXIMUM PRESSURE up to 5000 PSI.
  • UNIVERSAL Fitting for most Gas Power Washers.
Check Stock

CIRCOPACK Screw Tab Caps for Schedule 40 PVC Pipes Furniture Grade (2 pieces) (1-1/2 inch)

  • Three tabs with screw holes come out from the caps. These are strong when pulling straight out from the attached surface but they are weaker when side to side pressure is applied..
  • Some people use them for mounting a small table to the end of PVC pipe..
  • The Screw Tab Cap or table cap PVC fitting is useful any place you want to secure pipe to a surface..
  • The outlet is a non-threaded socket and is compatible with furniture grade PVC pipe or standard PVC pipe from a hardware store..
  • This is a CIRCOPACK value bundle comprising 2 pieces of Screw Tab Caps for use with 1-1/2 inch Standard PVC (Schedule 40). Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product..
Check Stock

Supply Giant 3942x10 Flexible Pvc Pipe Cap with Stainless Steel Clamps, 2 Inch Black (pack of 10), 2'

  • This is a CIRCOPACK value bundle comprising 2 pieces of Screw Tab Caps for use with 2 inch Standard PVC (Schedule 40). Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product..
  • The Screw Tab Cap or table cap PVC fitting is useful any place you want to secure pipe to a surface..
  • Three tabs with screw holes come out from the caps. These are strong when pulling straight out from the attached surface but they are weaker when side to side pressure is applied..
  • Some people use them for mounting a small table to the end of PVC pipe..
  • The outlet is a non-threaded socket and is compatible with furniture grade PVC pipe or standard PVC pipe from a hardware store..
Check Stock

Hayward BFA1040SES Series BFA Standard Flange Bulkhead Fitting, Socket x Socket End, PVC with EPDM Seals, 4" Size

  • Bulkhead fitting to connect two tubes or pipes through a panel.
  • Socket ends for connecting to a male pipe or fitting.
  • CPVC for better resistance to high pressures, corrosion, and temperatures than PVC, and an EPDM gasket for resistance to weathering, ozone, UV, electricity, oils, water, steam and some solvents.
  • Withstands temperatures from 40 to 190 degrees F.
Check Stock

ANPTGHT 3/4“ Tee PVC Fitting 3 Way Elbow Connector, Furniture Grade 90 Degree Elbow Side Outlet, PVC Corner Fittings for Building Furniture Greenhouse Shed Pipe Fittings Tent Connection（Pack of 8）

  • Material-Made of furniture-grade high-quality PVC material with a high-gloss finish. It will not change color, crack or degrade after years of use. Suitable for DIY construction.
  • Installation-Side-out elbows can connect at a 90-degree angle to each socket.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • Design-This PVC fitting connector has glossy surface and tapered edges.
  • Application- for building any type of structure out of PVC pipe, such as cat enclosure, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock

Ultimate Washer UW16-PWD3C8 Female Quick Coupler by Male Threads, 1/4-Inch, 4000 PSI Rated

  • Brass 1/4-Inch Female Coupler Fitting x 1/4-Inch Male Pipe Thread.
  • Used Anywhere High Pressure Connections are Frequently Assembled and Disassembled.
  • Solid Grip on the Socket Sleeve Allows for Easy Use.
  • The Ball Lock Design Insures a Tight Seal Connection Every Time.
Check Stock

24 Pack 4 Way 1/2 Inch PVC Fittings, Dveda PVC Elbow Fittings PVC Pipe Connectors for Furniture Build, Greenhouse Shed Pipe and Tent Connection

  • 1.High-Quality Material: The plastic fitting rack made of high-grade PVC material has a more precise manufacturing process than ordinary drainage pipe fittings. Not only can it withstand the impact or fall of a heavy object, but it will not show any cracks or breaks..
  • 2.Size and Design: This beautiful and practical 4 Way PVC Fitting is suitable for 1/2 inch pipes. The precise size can be connected to other objects such as water pipes. The white surface and tapered socket structure design can reduce friction and Can let water circulate smoothly..
  • 3.Features: PVC fittings are resistant to acid and alkali, low temperature, ultraviolet rays and impact resistance. The inside and surface of the pipe wall are smooth, and the installation is convenient without scratching your hands. The materials used are environmentally friendly and have a long service life..
  • 4.Application: Furniture parts are suitable for tent connections, chairs, desks, storage racks, greenhouse, DIY PVC structures & projects etc. It is ideal for edge, corner and center connection. It is perfect to use these PVC accessories to build the required DIY projects..
  • 5.Satisfaction After-sale Service: If you are not satisfied with your purchase for any reason, please feel free to reach our friendly ....
Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock