Best Smd3528 Led Flexible Strip

40 Pieces LED Strip Lights Connectors 2 Pin RGB Strip Lights Connector T Shape Solderless LED Adapter Light Connectors L Shape RGB LED Connector for SMD 3528 2835 LED Strip Light (8 mm)

  • What you will get: the package comes with 10 pieces L shape RGB connectors, 20 pieces gapless 2 pins connectors and 10 pieces T shape LED adapters light connectors, the sufficient quantity could meet your various demand in daily life.
  • Reliable material: this LED light strip connector is made of quality PBT material, flame proof and heat resistant, and the plastic is thick enough to ensure its safety and durability.
  • Installation guide: please power off before installation to ensure safe operation, and these LED light strip connectors are suitable for 0 - 4 A current and 0 - 24 voltage.
  • Moreover, these LED connectors are suitable for LED light strip SMD 3528 2835, and the maximum power is 72 W.
  • Easy to use: first of all, you need to open the wire clip, then install the ribbon light into the connector.
  • When installing, you should make sure the side of the light strip is in accordance with the site of + symbol in the connector.
  • Lastly, close the wire clip, you will find that there are no other tools needed, the operation is easy and fast, you can enjoy your bright and beautiful lighting.
  • Wide application: these strip light connectors can be applied for SMD 3528 2835 LED strip light, and they also fit for most light strips in the market.
Check Stock

Vbakor 6 Pcs 12'' Boat Interior Lights 12V Marine Courtesy Light Strip, Super Bright 18 LEDs Boat Deck Transom Cockpit Navigation Light, Waterproof Marine Lights for Pontoon Yacht (White)

  • ✅【Product Details】: 6 Pcs 12’’ 30cm White led strip lights with each 18 Pcs super bright 5050 chips, which is 3 times brighter than other 2835/3528 car lights on market, IP67 waterproof tube for any 12v boat interior and exterior use..
  • ✅【IP67 Waterproof】: The LED strip is put in silicone tube, which protects it very well from water & dust and makes it easy to clean. It will work well on exterior lights, even in extreme weather such as rainstorms..
  • ✅【Super Bright Lights】: Most of boat lights are SMD3528/2835 lights on market, not bright and only 6 normally led chips, But our lights are SMD5050 lights with 12 super bright led chips, which is 3 times brighter than other 2835/3528, this brightness is very safe for driving at night,. Touchable to children..
  • ✅【Widely Application】: The lights are widely used for boat interior light, cockpit light, deck light, transom light, step light, cabin light, courtesy light, navigation light, stern light, side light, accent atmosphere light, etc..
  • ✅【Easy to Install】 : These led strip light works on 12-volt only, 2 wires connection: The Black wire is Negative and the Red wire is Positive. The lights backing with stronger 3M VHB double-side adhesive, just peel off the paper and stick to sur....
Check Stock

Vbakor 12V Marine Boat Ultra Violet UV Black Light LED Lights Strip, Night Fishing Lights, 5050 LED IP67 Waterproof UV Led Strip for Fishing Pontoon Kayak Yacht Sailboat (4 Pcs 20'')

  • ✅【Product Details】: 4 Pcs 20’’ 50cm led strip lights with each 30 Pcs super bright 5050 chips, which is 3 times brighter than other 2835/3528 car lights on market, IP67 waterproof tube for any 12v boat interior and exterior use..
  • ✅【IP67 Waterproof】: The LED strip is put in silicone tube, which protects it very well from water & dust and makes it easy to clean. It will work well on exterior lights, even in extreme weather such as rainstorms..
  • ✅【Super Bright Lights】: Most of boat lights are SMD3528/2835 lights on market, not bright and only 6 normally led chips, But our lights are SMD5050 lights with 12 super bright led chips, which is 3 times brighter than other 2835/3528, this brightness is very safe for driving at night,. Touchable to children..
  • ✅【Easy to Install】 : These led strip light works on 12-volt only, 2 wires connection: The Black wire is Negative and the Red wire is Positive. The lights backing with stronger 3M VHB double-side adhesive, just peel off the paper and stick to surface, the adhesive surface must be clean and dry, It’d better to clean the surface with alcohol, Please test the lights before stick to surface, Please check polarity before wiring..
  • ✅【Widely Application】: The lights are widely used for....
Check Stock

LED Strip Lights Clips Light Mounting Clips One Side LED Light Clips with Screws for 10 mm Wide Waterproof LED Strip Lights (Transparent,100 Pack)

  • Practical and artistic: our LED light strip fixing clip is made of plastic material, light weight but not easy to break, flexible to protect your LED strip from thermal expansion.
  • In addition, its useful design allows you to fix the light strip firmly without worrying about affecting the overall aesthetics.
  • East to use: these LED strip clips are easy to ix by one screw for each clip, and the other side is firm under fixing, while the unfixed side is convenient to take down the LED strip light when replace or maintain it.
  • Wide applications: the one side LED strip light mounting brackets are suitable for SMD 3528 / 3014 / 5050 / 5630 waterproof strip lights and wires within 10 mm wide.
  • Recommend to use 3-6 pieces clips for 1 meter strip lights.
  • Ideal for LED strip mounting: the LED strip clips adopted single side shape of the light bar design, can keep your LED lights in one place without affecting LED's illumination, keeping the whole clean and beautiful.
  • Christmas decorations: during the Christmas season, our Christmas LED strip lights clips can help you hold the decorative lights in place, creating a great festive atmosphere.
Check Stock

Vbakor Boat Led Strip Lights, 4 Pcs 24'' Marine Boat Interior Courtesy Deck Navigation Lights, Super Bright Waterproof Marine Led Lights Strip for 12V Pontoon Fishing Boat Yacht Kayak Sailboat (Blue)

  • ✅【Product Details】: 4 Pcs 24’’ 60cm led strip lights with each 36 Pcs super bright 5050 chips, which is 3 times brighter than other 2835/3528 car lights on market, IP67 waterproof tube for any 12v boat interior and exterior use..
  • ✅【IP67 Waterproof】: The LED strip is put in silicone tube, which protects it very well from water & dust and makes it easy to clean. It will work well on exterior lights, even in extreme weather such as rainstorms..
  • ✅【Super Bright Lights】: Most of boat lights are SMD3528/2835 lights on market, not bright and only 6 normally led chips, But our lights are SMD5050 lights with 12 super bright led chips, which is 3 times brighter than other 2835/3528, this brightness is very safe for driving at night,. Touchable to children..
  • ✅【Easy to Install】 : These led strip light works on 12-volt only, 2 wires connection: The Black wire is Negative and the Red wire is Positive. The lights backing with stronger 3M VHB double-side adhesive, just peel off the paper and stick to surface, the adhesive surface must be clean and dry, It’d better to clean the surface with alcohol, Please t....
Check Stock

3528 2835 2 Pin 8mm LED Strip Connector Biantie La Unwired Clips - DIY Strip to Wire Quick Solderless Connection for 12v 24v Single Color Led Strip Lights (Pack of 10)

  • CONNECT TAPE TO WIRE - No soldering, quick and flexible connection. The 2 pin Led Strip Connector suitable for 8mm width SMD 3528 2835 3014 5630 single color LED light strip. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with COB led strips, rgb led strip..
  • NOT PICKY ABOUT WIRES - Work for 24awg, 22awg, 20awg, 18awg solid wire, stranded wire and fused wire etc. Only need to press the stripped wire into the slot to firmly connect and conduct. It avoids the dilemma that other connectors can't pierce the wires or can't be turned on or difficult to reuse..
  • SUPPORT UP TO 6A CURRENT CARRYING - Compatible with 5v, 12v, 24v led strips, allow you to connect longer LED strips by one LED connector. DIY led strip to wire connection length you want, no mater strip-to-wire extension or strip-to-strip jumper, free from the limit of terminal position.
  • COMPATIBLE WITH WATERPROOF STRIPS - Should peel off covered silicon on the surface around soldering line area, if you want to connect WATERPROOF LED strip light..
  • PACKAGE - Include 10pcs of unwired connectors. Not contain wires or strip lights..
Check Stock

ACTOO 4 Pin RGB Splitter Extension 1 to 2 Led Strip Connector Splitter Cable for 5050 3528 2835 RGB LED Strip Light 2 PCS

  • Multi-purpose: This LED connector kit comes with detachable T sheets and straight couplers, perfect for both 3 way connection and extension along a....
  • All 4 pin light strips covered: Work with any 4-pin 10mm (0.39in) wide SMD 3528/5050 multicolor LED flexible strip lights, whether it is a waterproof....
  • Solderless solution: Create a quick shunt, solid connection without the hassles of soldering. Just slide the light strip under the connector's pins....
  • Fireproof material: JACKYLED RGB connectors are made from PBT material, which is heat resistant, fireproof and no Fire Hazard. 72W max wattage, which....
  • You get extra: The LED strip light connector kit comes 10 pcs T boards and 32 pcs connector clips, as well as detailed instructions in both paper and....
Check Stock

LAFULIT 8 PCS Under Cabinet Lighting Kit, Stick on Lights, Flexible Led Strip Lights with RF Remote and Power Adapter, for Kitchen Cabinet Shelf Desk Counter Corner, 4000K Neutral White, 13ft

  • Durable and artistic: our LED light strip fixing clip is made of plastic material, light weight but not easy to break, durable and flexible to protect your LED strip from thermal expansion and other damage.
  • In addition, its transparent design allows you to fix the light strip firmly without worrying about affecting the overall aesthetics.
  • East to use: these transparent LED strip clips are easy to ix by one screw for each clip, and the other side is firm under fixing, while the unfixed side is convenient to take down the LED strip light when replace or maintain it.
  • Wide applications: the one side LED strip light mounting brackets are suitable for SMD 3528 / 3014 / 5050 / 5630 waterproof strip lights and wires within 10 mm wide.
  • Recommend to use 3-6 pieces clips for 1 meter strip lights.
  • Ideal for LED strip mounting: the LED strip clips adopted single side shape of the light bar design with transparent color, can keep your LED lights in one place without affecting LED's illumination, keeping the whole clean and beautiful.
  • Christmas decorations: during the Christmas season, our Christmas LED strip lights clips can help you hold the decorative lights in place, creating a great festive atmosphere.
Check Stock

LightingWill 10pcs/Pack Strip Wire Solderless Snap Down 2Conductor LED Strip Connector for 10mm Wide 5050 5630 Single Color Flex LED Strips

  • 2 pin connector for 10mm wide SMD5050 5630 single color LED strip.
  • Working Condition: Can be able to stand up to 4A current and 0-24V voltage.
  • Heat resistance level from -20 ~ 100 degree C..
  • One end with clip to strip, the other with wires as lead.
  • Compatible with both waterproof and non-waterproof light strips (Please peel off silicon on the surface around soldering line area when install waterproof strips ).
  • Package includes: 10x 2 pin connectors for 10mm SMD5050 5630 single color LED strip lights. Please search B01DM7GXIA on Amazon for 4 pin 10mm 5050 RGB strip connectors.
  • Search B01DM7F052 for 8mm 3528 2835 LED strips..
Check Stock