Best Small Stainless Steel Corner Sink

Triangle Dish Drying Rack for Sink Corner Roll Up Dish Drying Rack Folding Stainless Steel Multipurpose Over The Sink Corner Dish Drainer Mat for Kitchen (Grey)

Ergonomic Design: over the sink SUS304 stainless still triangle design multipurpose dish drying rack for sink corner. Triangle design helps to make the best use of sink corner space.
Displayed Dimensions: 16.3"L x 9.2"W X 0.31''H. 9pcs SUS304 Premium Stainless Steel Pipes. Please kindly measure your sink size firstly before purchasing this sink corner triangle Dish Drying Rack!.
This dish drainer can roll up and go in a drawer quickly when not in use. Works great and keeps the kitchen sink area looking neat, the best one of dish drainers for kitchen countertop.
Green Environmental Materials: made of SUS304 premium stainless steel pipes, this drying rack is very solid and sturdy. It can resist to constant use and rust for years. In terms of construction, the anti-slippery highest level silicone rubbery grips are firmly attached to ends of stainless steel pipes. those are our unique advantages.
Heat Resistant and Space Saver: Heat Resistant Dish Drainers Mat for Kitchen Sink Counter and Roll Up Dish Drain Rack: this kitchen dish rack is thermoresistant, and can resist up to 450°F. BPA-Free and you can run hot water over stainless steel dish rack, and even place hot pot on the dish racks without causing any damage.

Check Stock

KABCO 25 Inch Wide 12 Inch Deep Commercial Sink 18 Gauge Undermount or Topmount Drop In Single Bowl Stainless Steel Laundry Utility Sink 25 L x 22 W x 12 D Inch

Premium Quality SINK : 18 Gauge Premium Quality T304 series stainless steel with 18% chrome and 10% nickel content. No Corrosion or Rust. This super....
SINK DIMENSION: 25 inch length 22 inch width 12 Inch deep sink is perfect for laundry, mudroom, and utility room. Small Radius Corner makes this sink....
COMBO SINK PACKAGE : 25 Inch Stainless steel Undermount Sink made of 18-Gauge construction, making it very superior strength and durability. Stainless....
High TECH DRAINAGE: Using Cutting-Edge High Power Laser Technology the "X" Chanel drain technology allows for water quick and clean drainage. Rear set....
QUALITY & SERVICE: Extra thick 5mm & Extra Big sound and heat insulation pads keep the sink quiet and inside water warm. Either Undermount or Topmount....

Check Stock

MONSINTA Gold Bar Sink, Undermount Bar Sink, 15\ x 15\ Small Wet Bar Sink, RV Sink, 16 Gauge Stainless Steel Kitchen Sink with Sink Protector, Cutting Board and Sink Drain Assembly

Gold Bar Sink Dimension: 15” x 15” x 10” (381mm x 381mm x 254mm), 10” depth (Inside), deep enough to clean glasses and dishes..
Undermount Bar Sink: Gold bar sink is made of high quality stainless steel, nice and durable..
Small Bar Sink: R10 round corner is easy to clean, X-type drain line drains quickly, 16 gauge thickness is more durable and not easy to deform..
Stainless Steel Kitchen Sink: With integrated ledge bar sink, it can save space and is practical and convenient..
Wet Bar Sink: Matching with suitable cutting board, gold sink protector and gold sink drain assembly. Gold bar sink with gold kitchen sink accessories is fashionable and beautiful..

Check Stock

Bathroom Sink Wall Mount Small Sink Bar Sink Triangle Wash Basin Corner Sink Stainless Steel Sink Mini Vanity Space for Kitchen Sink (faucet not included)

【Material Size 】stainless steel. Size: 33*44*37cm/12.99*17.32*14.56inches, depth: 13.2cm/5.19inches.
【Unique Design】Wall hung small sink has a unique triangle shape. This is a wall-mounted sink that does not take up space, so it can be installed in narrow places such as balconies, bathrooms, toilets and kitchens. Small simple indoor and outdoor sink wash basin use the space effectively..
【Function Advantages】Bar sink,high-quality hand wash basin,High-quality stainless steel integrally formed sink.The wall sink is easy to clean.
safe and worry-free, convenient for cutting vegetable and cooking, washing dishes. A set of equipment for triangular sink with faucet..
【Perfect Use】Wall mount bathroom sink created so much space. And it can be mounted on a countertop or on a wall. Our sink is suitable for any place you want to use, such as restaurant, bar, cafe, kitchen,corner room and bathroom..
【Professional Service】We ship quickly from the US warehouse and receive the goods within 3-8 days. If you encounter any problems.Do not refund and complain, first contact me through Amazon to solve it for you (including replacement new goods or parts,compensation, return labels).

Check Stock

Sink Protection Grid 28-5/8' x 14-5/8', Rear Drain with Corner Radius 0 or 3/16', 304 Stainless Steel for Kitchen Sink BEHOK BH-2814 Sink Grate

FITS STANDARD SIZES SINK: This BEHOK sink grid length 28-5/8", width 14-5/8", height 1", with rear drain corner diameter 5" for bottom of sink, fit sinks corner radius R0 or 3/16". Please notice your sink's size and drain location. (Note: Please measure the inner dimension of your sink. It's VERY IMPORTANT to measure the dimension of your sink bottom at 1 inch height, DON'T from the sink bottom directly.).
HIGH-QUALITY STAINLESS STEEL: Made of food-grade 304 stainless steel, allowing direct contact with food. It’s durable, corrosion-resistant and rust-resistant. Attractive, stainless steel finish gives bottom grid a pristine look that complements all sink materials..
MULTI FUNCTION: This BEHOK sink grid can use on many purposes. You can use it as a drain rack, cooling rack, defrosting grid, drying grid, dishware drainer, etc..
PROTECT SINK BOTTOM: With protective rubber feet and bumpers to protect the bottom of your sink. Additional replaceable parts extend the service life of the product..
EASY TO CLEAN: Fits comfortably inside the dishwasher for convenient cleaning. Note: Must remove the rubber feet before placing grid in dishwasher..

Check Stock

CIPOTAL 26.8 in. x 13.2 in. Centre Drain Sink Grid with Supersoft Silicone Feet in 304 Grade Stainless Steel

Cipotal Brand Sink Grids are designed to perform heavy-duty tasks of supporting fully loaded pots without bending. It also has small grid openings, so the silverware would not slip through the grid..
The custom sized 26-3/4" X 13-1/4" (3/8" corner and Center Drain) is designed to fit the bottom of your sink. Please make sure you measure the dimensions of the sink bottom. As the gird sits around 1" above the bottom, the grids should fit the dimensions of sink at 1" up from the bottom, with some room around the grid. Their corner and drain location should also match..
The sink protector is euqiped with special silicone feet (extra spare feet aslo included). This soft feet would protect the sink perfectly without leaving any marks on the sink surface..
This product is made of 304 Stainless steel material, which provides the best protections agaist rust. It is also DISHWASHER SAFE for convenient cleaning. Please remove the feets before putting into the dishwasher..

Check Stock

Undermount Double Bowl Kitchen Sink - Lordear 32 inch Undermount Sink 16 Gauge Stainless Steel Round Corner Double Bowl 60/40 Kitchen Sink Basin

❤ 32x19 Inch Double Bowl Kitchen Sink Undermount- Sink Size: 32*19*10 inch(minimum cabinet size is 35 inch).
3.5 inch standard draining hole fits perfectly with your garbage disposal unit. What's in the box: Include a 32 inch undermount double bowl sink, 2* 304 stainless steel bottom grid, 2* 304 stainless steel drain assembly, 1* rollup drying rack, clips/template/instruction..
❤ 16 GAUGE Premium T-304 Grade Stainless Steel- Never rust or stain. Commercial grade BRUSHED FINISH - made for resisting rust and charming look. Unlike satin finish, our brushed-finish can hide scratches and matche pretty well with your kitchen appliances. Round corner design can help you clean corner stain easily..
❤ Patented Design---Lordear 32" Double Bowl sink designed with X-shaped diversion water design and a gently sloped bottom that prevents standing water inside the bowl, fast drainage, no blockage. Handmade workmanship ensures you get a leakage-free stainless steel double bowl sink..
❤ Equiped With Heavy duty SOUND PROOF UNDERCOATING and THICK RUBBER PADS to minimize noise and condensation, ensure you a quiet kitchen and protect your closet..
❤ Warranty---3 months hassle free for return and replacement+ limited lifetime warranty. Any problem or puzzlement, pl....

Check Stock

Transolid TCAB-2420-WS 24-in Laundry Cabinet Sink, Stainless Steel High Arc Faucet, and Basket, White

INCLUDES: Pre-assembled cabinet with apron-front design, a pull-out basket and transitional hardware, a stainless steel sink with center drain hole and strainer, and a flex neck faucet.
MODERN CONVENIENCE: The pre-assembled cabinet provides time-saving setup-up right out of the carton.
constructed of particle board with a white, high gloss PVC laminate finish, modern farmhouse apron-front, ample storage space, a space-saving toe-kick, and transitinoal MDF doors that include transitional brushed nickel door hardware and feature slow closing hinges for quiet, gentle operation.
POWERFUL SINK: The included sink is handmade, constructed of solid 19-gauge stainless steel, and featuring an integral backsplash, a pre-drilled faucet hole, and a central drain location, with a matching strainer.
SPACIOUS BOWL: The sink features a 9-inch depth, 13-gallon water capacity, and channeled grooves, perfect for use within a laundry room or garage, as it offers more room inside for a load of laundry, large buckets, or paint pans.
SUPERIOR FAUCET: The included faucet features stainless steel construction, a single lever handle, a flexible neck covered with white silicone, a dual function spray head with garden hose adapter, a ceramic disc cartridge, and boasts an impressive ....

Check Stock

CIPOTAL 29.5 in. x 15.5 in. Rear Drain Kitchen Sink Bottom Grid with Supersoft Silicone Feet in 304 Grade Stainless Steel

Cipotal Brand Sink Grids are designed to perform heavy-duty tasks of supporting fully loaded pots without bending. It also has small grid openings, so the silverware would not slip through the grid..
The custom sized 29-1/2" X 15-1/2" (3/8" corner and Rear Drain) is designed to fit the bottom of your sink. Please make sure you measure the dimensions of the sink bottom. As the gird sits around 1" above the bottom, the grids should fit the dimensions of sink at 1" up from the bottom, with some room around the grid. Their corner and drain location should also match..
The sink protector is euqiped with special silicone feet (extra spare feet aslo included). This soft feet would protect the sink perfectly without leaving any marks on the sink surface..
This product is made of 304 Stainless steel material, which provides the best protections agaist rust. It is also DISHWASHER SAFE for convenient cleaning. Please remove the feets before putting into the dishwasher..

Check Stock