Best Small Cnc Machine

500W CNC Router Machine, MYSWEETY 3 Axis 4540 CNC Metal Engraving Milling Machine for Carving Cutting Wood Acrylic MDF PCB Plastic, Working Area: 430*390*90mm(16.9*15.4*3.5inch)

  • 【500W Spindle & High Speed】 The upgraded 3-axis 4540 engraving machine is equipped with an 500W spindle for more power and higher efficiency, making it possible to cut stainless steel, aluminum and other metals. The maximum movement speed can reach 5000mm/min, the spindle speed range is 0-11000rpm/min.
  • 【Larger Working Area】 The cnc router machine has a larger engraving area, increased to 430*390*90 mm(16.9*15.4*3.5inch). The working table has precise scale lines, which is convenient for you to locate and measure the engraving material size.
  • 【Wide Application & Compatibility】 The CNC wood machine is compatible with GRBL software and supports systems such as Windows XP/7/8/10 and Mac OS. Suitable for engraving and carving stainless steel, wood, aluminum, brass, plexiglass, leather, PCB, MDF, acrylic, resin, nylon, carbon fiber, PCB, PVC, etc.
  • 【Easy to Assemble】 This CNC wood carving machine could be assembled in 15-30 minutes. The main components are already pre-assembled. Wires are clearly labeled for quick connection. The control board, power supply, emergency stop, and wires are integrated into a newly designed box for easy and safe operation. You just need several installation steps and wiring to start carving your projects.
Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

Face Mill Shoulder Cutter BAP400R-50-22-4T 90 Degree Square Shoulder Indexable CNC 4 Flutes Face Mill Shoulder Milling Cutter with Wrench and Box

  • GREAT TOOL FOR CNC MILLING MACHINE--This BAP400R-50-22-4T Square Shoulder Face Mill Cutter is designed for CNC milling machine.
  • HIGH GRADE ALLOY STEEL MATERIAL--This Square Shoulder Indexable Face Milling Cutter is made of high quality alloy steel, which is featured with high hardness and good durability to ensure a long term service.
  • GREAT REPLACEMENT TOOL FOR YOU--This Face Shoulder Milling Cutter is regarded as an essential mill parts for milling machine, and it is very convenient to use it to replace the broken one or the old one.
  • USEFUL BOX FOR CONVENIENT STORAGE AND PROTECTION--There comes with a plastic box for easy storage and carriage, and it can provide good protection for the tool as well.
Check Stock

Galapagoz Drill Paddle Water Cordless Kayak Canoe Boat Raft Light Weight Trolling Motor Fishing USA

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm that 10 times precision beyond normal spindle motor..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

CNCTOPBAOS Upgrade CNC 3018 Pro 3 Axis DIY Mini CNC Router Kit with GRBL Remote Control Offline Controller PVC PCB Acrylic Plastic Wood Cutting Engraving Carving Milling Machine

  • ♞【Upgrade Version 3018 Pro with Offline Controller】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers.
  • you can operate this machine without connect the computer.
  • offline controller included a SD card reader to write into the root directory G-code files or NC file.
  • Support manually adjust X, Y, Z axis location as engraving starting point,manually open or close spindle..
  • ♞【Main Feature】 Working area:30x18x4.5cm.
  • Type: USB Port Desktop cnc router/Spindle: 775 spindle motor (12-36V) 24V:10000rpm/ Stepper Motor: Nema17 stepper motor,1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module..
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copp....
Check Stock

Seamax Foldable Inflatable Boat (Hull) Storage and Carrying Bag, with Sunlitec Fabric, Reflective Handles

  • 4-sided bag with double side handles. There are 16 soft handles covered with reflective tape making it easy to grab the bag and carry the boat in any situation..
  • It’s easy to carry your boat in this bag because of all the handles. Specially developed upper and lower handles with a 4 inches gaps. Carry the boat by the lower handles if the boat packs up small or use the upper handles if the boat is large..
  • Solid design with Double reinforced handles with CNC sewing reinforcement. Full size 3x4 cross over webbing for heavy weight support. Quick release Adjustable buckles for ease of use. Commercial grade design and made..
  • Full protection for the boat from dragging it on the ground. Double storage pockets for added convenience..
  • NEW SUNLITEC FABRIC WITH WELL CNC MADE: High-performance Sunlitec outer layer, micro-poly foam middle layer, and polyester inner layer. This exclusive new material can provide more strength and better durability, better temperature, and water resistance. Sewed by CNC machine and Seamax 2 years coverage to protect your investment..
Check Stock

Fiber Cutter, Fiber Cleaver Aluminum Alloy Tungsten Steel ABS Unbreakable Portable High Accuracy for Net Installation

  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
Check Stock

Comgrow 2 in 1 ROBO CNC 3018 5000MW Laser Engraving Module Compressed Spot,GRBL Control 3 Axis CNC Router Machine Kit with Offline Controller,End Mill Bits,for Wood Glass Mirror Stainless Steel

  • 【PRE-ASSEMBLED】Comgrow ROBO CNC 5W Laser Engraving for wood stainless steel stone glass ceramics is very easy to assemble and use. JUST DO THE UNBOXING AND LOCK 6 SCREWS when receive it, then, step on your creating journey..
  • 【ULTRA-FINE COMPRESSION LASER】The laser power for this CNC laser and router machine is 5W, the high-power engraving speed is faster, and the accuracy is higher. The ultra-fine laser focus area is reduced to 0.08mm^2. The high-density laser can easily cut 4mm thick wood and black. Acrylic.
  • can directly engrave smooth stainless steel metal and ceramics..
  • 【AUTOMATIC TOOL-SETTING】Comgrow ROBO CNC router pre assembled machine can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors.
  • 【OFFLINE CONTROLLER】The Comgrow ROBO CNC router Laser machine can work without pc. ROBO supports operating without PC, THE CNC ROUTER IS EQUIPPED WITH A OFFLINE MODULE. Just transfer files to a SD card, you may begin creating and no PC needed..
  • 【COMPREHENSIVE AFTER-SALE SERVICE】 Comgrow ROBO CNC Engraving machine for metal stone wood glass Stainless Steel offer exhaustive after-sale service, you can search "Comgrow" through Facebook, Youtube, Twitter, Instagram and google and will easily find out our Comgr....
Check Stock

Comgrow ROBO Table CNC Router Machine with GRBL Offline Control,3-Axis Engraving Milling Machine 300x180x45mm Working Area for Carving Cutting Plastic Acrylic PCB PVC Wood Aluminum brass

  • 【Upgrade Comgrow CNC ROBO 】Comgrow cnc router 3 Axis 42 stepper motor are X/Y/Z Axis power, the axis moves more smoothly. 775 spindle motor up to 10000r/min. and comes with short circuit protection, no need to worry about module damage..
  • 【CUSTOMISED SETTINGS】Metal CNC machine cutter Full Aluminum Alloy tray Working area: 30x18x4.5CM. Meets most of the engraving needs.
  • 【AUTOMATIC TOOL-SETTING】CNC Router for metal aluminum copper can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors During the engraving process, there is no need to manually adjust the height of the Z axis to make the drill touch the surface of the engraved object.
  • 【 a wide range of projects and materials】the comgrow cnc router machine Capable of cutting and engraving all types of plastics, soft aluminum, Copper, woods, acrylics, PVCs, PCBs and MDF, the setting parameters of different materials can refer to the product page below middle"".
  • 【more Simply Assemble and Use】This table cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and SD Card of all the files. Please let us know if you need any help ..
Check Stock