Best Skidproof Heat Shrink Tubing

Wirefy 1/4\ Heat Shrink Tubing - 3:1 Ratio - Adhesive Lined - Industrial Marine Heat Shrink Tubing Roll - Black - 50 Feet Roll

  • 3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds..
  • DUAL WALL TUBING - Provides enhanced protection from wear and tear. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 1/4 INCH (6.4mm) SHRINK TUBING DIAMETER - Get the exact diameter you need. 50 Feet of shrink tubing will last through many projects..
Check Stock

650pcs Heat Shrink Tubing Black innhom Heat Shrink Tube Wire Shrink Wrap UL Approved Ratio 2:1 Electrical Cable Wire Kit Set Long Lasting Insulation Protection, Safe and Easy, Eco-Friendly Material

  • Safe and Environmental Friendly Material Shrink Wrap: Conform to UL224, CSA C22.2, RoHS standard. Electrical heat shrink tubing material composition does not contain heavy metal and other environmentally hazardous substances. No slowly or long-term virulence. No need to worry about your health when using innhom heat shrink wrap..
  • Premium Quality Heat Shrink Tubing Set: Excellent flame retardant (UL 224, VW-1) and insulation performance. Soft and flexible wire shrink wrap, low shrinkage temperature-minimum shrinkage temp: +158℉(+70°C), fast shrinkage, easy and convenient to use with a heat gun..
  • Effective and Long Lasting Protection: innhom heat tube shrink has the advantages of good tightness, acid and alkali resistance, durable and anti-aging. Shrink wrap wire tensile strength: 14 Mpa. Dielectric strength: 003e20kV/mm. Elongation at break: 003e400%. Volume resistivity: 003e1.0× 10^14Ω.cm. Cold-resistant bending -22℉(-30 °C) × 1h without cracking. Use innhom heat shrink tubes instead of ugly and short-lived electric tape..
  • Functional Wire Shrink Wrap Tubing: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. innhom heat shrink tubing assortment is mainly used in wire connection, rust prevention and cor....
Check Stock

Industrial Heat Shrink Tubing Kit,AIRIC 300pcs 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat Shrink Tubing Black, 7 Sizes(Diameter): 3/4, 1/2, 3/8, 1/4, 3/16, 1/8, 3/32 inch

  • 7 Sizes: Industrial heat shrink tubing kit includes 7 most commonly used diameters ranging from 3/32" to 3/4". The length of heat shrink tube is precut to 45mm..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

2 Pcs 1/2 inch (Diameter) Heat Shrink Tubing, 3:1 Adhesive-Lined Large Heat Wire Shrinkable Tube by MILAPEAK (4 Feet, Black & Red)

  • ★ Premium Wire Protector: Our heat shrink tubes are perfect for appliance/auto electric wire cable harness wrapping, which will be exposed to harsh environments. They can be also used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your family. Round diameter: 1/2'', Length: 1.22M(4Ft)..
  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY..
  • ★ Fast & Easy Use: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and wi....
Check Stock

MILAPEAK 180 PCS Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, Marine Grade Shrink Wrap - Industrial Heat-Shrink Tubing - Black

  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Multiple Sizes: 180pcs black high-quality marine heat shrink tubing for your choose, various sizes can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc..
  • ★ Tidy Connection: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are both UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your famaily from toxins..
  • ★ Fast & Easy Use: Our heat shrink tubing was pre-cut to 3.5 inches, it is 3:1 heat shrink ratio, and will shrink up to 1/3 of or....
Check Stock

10 pcs 8 AWG 8 Gauge Butt Splice Connector Pure Copper Tin Coated Marine Grade Uninsulated - by WindyNation

  • Includes AWG splice butt connectors (use selection tabs to choose gauge size and quantity desired) + black dual wall adhesive lined heat shrink tubing (2 inches of heat shrink tubing per connector).
  • Butt connectors are made of pure copper with excellent electrical conductivity. Tin plated for corrosion resistance. Perfect for marine environments and outdoor use..
  • Dual wall polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 2 inches of heat shrink tubing per connector..
  • Designed to fit solid or stranded wire. Easily connect spliced cables to connectors for a non-insulated seamless connection. Connectors can be crimped or soldered. .
Check Stock

650pcs Heat Shrink Tubing innhom Heat Shrink Tube Wire Shrink Wrap UL Approved Ratio 2 1 Electrical Cable Wire Kit Set Long Lasting Insulation Protection Safe and Easy Eco-Friendly Material

  • Safe and Environmental Friendly Material Shrink Wrap: Conform to UL224, CSA C22.2, RoHS standard. Electrical heat shrink tubing material composition....
  • Premium Quality Heat Shrink Tubing Set: Excellent flame retardant (UL 224, VW-1) and insulation performance. Soft and flexible wire shrink wrap, low....
  • Effective and Long Lasting Protection: innhom heat tube shrink has the advantages of good tightness, acid and alkali resistance, durable and....
  • Functional Wire Shrink Wrap Tubing: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. innhom heat shrink....
  • What You Get: Total 650pcs ratio 2:1 heat shrink tubes, 6 colors (Black, White, Yellow, Blue, Green, Red), 8 sizes. Supplied internal diameter, 1/24",....
Check Stock

180 PCS Heat Shrink Tubing Kit - 3 1 Dual Wall Adhesive Tube - Industrial Marine Shrink Wrap -Waterproof Electrical Cable Wire Kit Set Insulation Sealing Glue inside

  • 【THE WELDING PROCESS IS SIMPLE】: In the process of welding with the industrial heat-shrink tubing, no other crimping tools or welding machines are....
  • 【EXCELLENT WATERPROOF AND SEALING PERFORMANCE】: Shrinking ratio: 3:1. Each shrink tube has glue inside. When you heat it up, the adhesive comes....
  • 【TRANSPARENT PACKAGING AND ORDERLY ARRANGEMENT】: These heat shrink tubing will be arranged in the storage box in an orderly manner, which is very....
  • 【WIDE RANGE OF APPLICATIONS】: The dual wall heat shrink tubing have a wide range of applications. They are all certified electrical connectors.....
  • 【VARIOUS SIZES】: Our shrink tubing for wires contains seven different commonly used sizes, ranging from 3/32" to 3/4", and a comprehensive size....
Check Stock

Wirefy Heat Shrink Tubing Kit - 3 1 Ratio Adhesive Lined Marine Grade Shrink Wrap - Automotive Industrial Heat-Shrink Tubing - Black Red 200 PCS

  • 3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation..
  • VARIETY OF SIZES - We have included larger diameter heat shrink tubing ranging from 1/8" to 1". Shrink tubing is precut to 1.75 inches..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Professional connections made in seconds..
  • DUAL WALL TUBING - Outer wall provides abrasion resistance. Inner wall creates waterproof seal and strain relief..
Check Stock