Best Single phase Brush Generator

1600W Windmill Generator 5 Blade Small Wind Turbines Kit Industrial Energy Equipment (Black 48V)

  • 【STABLE OPERATION】: The durable parts of this windmill generator adopt a three-phase AC permanent magnet synchronous generator, which has stable operation, low noise and long service life..
  • 【ADJUSTING VOLTAGE AND CURRENT】: The windmill generator can effectively adjust current and voltage and improve wind energy utilization..
  • 【WIDE APPLICATION】: This windmill generator is widely used for charging boats, terraces, cabins or mobile homes, etc..
  • 【EASY TO INSTALL】: The windmill generator is well made and the wind turbine is easy to install, maintain and repair..
  • 【MATERIALS】: The windmill generator is made of high-quality materials, resistant to high temperatures, and guarantees the speed of power generation..
Check Stock

Rigol DG1022Z 25 MHz Arbitrary Function Generator with Second Channel

  • 25MHz Function Generator, 2 Channel, 125MSa/sec, 16Bit Resolution, 2M Memory.
  • 2 Mpts memory depth (upgradeable to 8 Mpts).
  • Built-in high-order harmonic generator (at most 8-order harmonics).
Check Stock

Generac 6852 Home Link Upgradeable Transfer Switch Kit, 30 Amp

  • 100-Amp 120/240 volt single phase Smart transfer switch is housed in a Steel NEMA/UL type 3R enclosure.
  • Transfer switch connects through the utility meter for easy installation.
  • smaller fuses integrated into the control board.
  • Heavy duty Generac contactor is a UL recognized Device designed for years of service.
  • The controller at the generator handles all the timing, sensing, exercising functions and transfer commands.
  • Can be used in Tandem with Generac's Smart Management modules, up to 8 more loads can be managed as well, providing the most installation efficient power Management options available.
Check Stock

Sigineer Power 48V 5000W Single Phase 240V Off-Grid Solar Inverter Charger,48V DC to 240V AC Pure Sine Wave Inverter,100A MPPT Solar Charge Controller,450V Max PV Input,Parallel Operation

  • ...mmunication port support RS485/CAN protocol, multi-stage smart charging, utility charging timer function, parallel operation, support operation without battery connected.
  • AUTOMATIC: Auto-wakeup MPPT charge controller, automatic over-load bypass, auto-recovery from over-load/over-temperature/low-battery cut-off, auto-generator start, auto-sensing frequency (50Hz or 60Hz).
  • MULTI-MODE: 4 charging modes, 3 output power priorities, configurable parameters set through LCD menu, remote monitoring and control, protections against overload, short circuit, over-temperature, under & over voltage, over-discharge, and battery reverse polarity protection.
  • BUY WITH CONFIDENCE: Trust Sigineer Power, a dedicated inverter brand and professional manufacturer in business for over 10 years, offering 12 months warranty and lifetime tech support.
  • REMINDER: This is NOT a SPLIT PHASE inverter, it CAN NOT output 120Vac. It ouputs 240Vac SINGLE PHASE ONLY. Please keep this in mind when you place an order..
Check Stock

Generac RXSW200A3 200 AMP Smart Transfer Switch

  • 150-Amp 120/240 volt single phase Smart transfer switch with service disconnect which is housed in an aluminum NEMA/UL type 3R enclosure with electrostatically applied and baked powder paint.
  • Transfer switch connects through the utility meter for easy installation.
  • Heavy duty Generac contactor is a UL recognized Device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands.
  • Can be used in Tandem with Generac Smart Management modules, up to 8 more loads can be managed as well, providing the most installation efficient power Management options available.
Check Stock

SMARTGEN MGC100 Manual/Remote Start Generator Controller Module

  • Low cost controller designed to start/stop a generator manually and remotely.
  • Suitable for 1-3 phase gasoline and diesel gensets.
  • Generator protection, built-in alarms and warnings.
Check Stock

310A Pro/Tran2 30-Amp 10-Circuit 2 Manual Transfer Switch with Optional Power Inlet

  • 200-Amp 120/240 volt single phase Smart transfer switch with service disconnect which is housed in an aluminum NEMA/UL type 3R enclosure with electrostatically applied and baked powder paint.
  • Transfer switch connects through the utility meter for easy installation.
  • Heavy duty Generac contactor is a UL recognized Device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands.Maximum Wattage:48000 Watts.
  • Can be used in Tandem with Generac Smart Management modules, up to 8 more loads can be managed as well, providing the most installation efficient power Management options available.
Check Stock

2X 5-15 Plug Male to Generator Twist Lock L14-30 Receptacle Female Y Adapter Cord STW 3 Feet 120V/240V 30 Amp Generator Welder Dryer Power Cord Adapter

  • MALE Rating: 10AWG 5-15P Double male Max 15Amp For Each 125V 3 Prong.
  • FEMALE Rating: Generator NEMA L14-30 Receptacle 4 Prong 30 AMP 125V / 250V..
  • If you connect it to two outlets on different phases of the panel, you will have a total of 30 amps of capacity at 240v. If you connect it to two outlets on the same phase of the panel, you will have two 15 or 20 amp, 120v circuits on one cord..
  • Molded plug, copper wiring coated wire, heavy-duty flame retardant, UV-resistant, STW indoor/outdoor water-resistant PVC jacket..
  • Tips: According to existing user and customer reports, it does not work with the Predator 4000 generator.
Check Stock

PRINCE CASTLE Drive Motor Assembly 87-028AS

  • ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
  • 【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
  • 【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
  • 【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
  • 【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock