Best Single Phase Kwh Meters

Prowinch 1 Ton Electric Chain Hoist with Wireless Remote Control System Single Phase 2000Lbs Load Capacity 20ft Lift Height Hook Mount Chain Hoist G80 Electric Hoist Double Chain

Voltage 110V at 60Hz Single Phase Motor Capacity 1 ton or 2200 pounds lifting height 20 ft Lifting speed 2.5 meters per min or 8 feet per min Power 0.65 kw Wired remote control 15 feet long with Up and Down and Emergency Stop.
Different from the standard Hoist equipped with Zinc Plated Steel Wire. This hoist is equipped with a G80 steel chain and a built in chain bag that keeps chain out of the way during operation.
Key safety features such as all-way limit switches emergency stop and automatic brake system to prevent over-travel.
The single phase motor provides the power to meet your operational requirements.
3 Year Warranty Customer Support and Service in the USA.

Utilizes revenue-grade 0.3% accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements.
Up to three sets of CTs per phase can be paralleled per meter without the need for a meter multiplier.
Available in indoor flush mount enclosure.

ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

Certified to all applicable standards of ANSI C12.1.
Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
Up to three sets of CTs per phase can be paralleled per meter.

Certified to all applicable standards of ANSI C12.1.
Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
Up to three sets of CTs per phase can be paralleled per meter.

Data logging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings).
Flexible clamp probes can be used for wrapping around bus bars and wire bundles.
Large backlighting LCD displays up to 35 parameters in one screen.
Clamp-on True RMS power measurements with on-screen Harmonics display.
Simultaneous display of Harmonics and Waveform.

ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

Certified to all applicable standards of ANSI C12.1.
Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
Up to three sets of CTs per phase can be paralleled per meter.

☞ Model: MDQ-100A is designed for single phase Full wave rectification, which has four diodes connected in a one phase bridge configuration..
☞ Max. Average Forward Rectified Current : 100A.
Production Size: 80 x 40 x 32mm/ 3.1" x 1.6" x 1.2" (L*W*T).
package content: 1 x rectifier bridge 1 net weight: 130g.
package content: 1 x rectifier bridge radiator.
☞ Applications: DC power supply for instrument equipment , Input of PWM frequence converter rectifying power supply , Excitation power supply for DC motor, Input of switch power supply and auxiliary current Inverter current..