Best Sight Glass Flow Meter Gauge

Antstone HVAC Digital Manifold Gauge Set AC Dual Pressure Gauge Refrigeration Repair Tool with 3 Hoses 90 Kinds Refrigeration Data

... [Multifunction] - 3 working modes: refrigerant pressure mode, vacuum percentage mode, leak detection mode. 5 pressure unit conversions: KPa, Bar, PSI, InHg, KgF/cm². 2 temperature unit conversions: ℃ & ℉..
[Explosion-proof Sight Glass] - Through the high-definition glass window, the flow of refrigerant can be clearly observed, so problems can be found in time, so that problems can be detected in time..

【PROFESSIONAL AIR FLOW METER】Protmex PT6252B anemometer is a portable wind speed gauge that can accurately measure airspeed in 5 units: m/s, km/h, ft/min, knots, ft. Users can work under the dim surrounding with your anemometer via the bright backlit LCD screen..
【USB DATA LOGGING AND DATA SYNC ON COMPUTER】The Protmex air flow meter cfm comes with a USB cable and PC software support can connect the wind meter to the computer via a USB port. For wind data logging, analyzing, and monitoring..
【MULTI-FUNCTIONAL ANEMOMETER】The digital handheld anemometer can monitor and record wind speed, air volume, temperature, humidity, dew point temperature, wet bulb temperature, CFM airflow, and RH, perfect for balancing airflow in HVAC tasks such as duct vents, AC air output testing..
【SWITCHABLE READING】The Protmex wind gauge has the functions of reading holding, maximum value, minimum value, etc. With a large-screen LCD and backlight, the multi-unit switching function..
【ACCURATE AIR VELOCITY METER】Our Protmex wind speed meter for measuring wind speed range 0.5~30 m/s(+/- 2% of readings).
Wind temperature -20~60℃, -4℉-140℉(+/-0.2℃,32.56℉).
2 temp sensors and 8 vanes make the meter is very sensitive to....

Max. Supply Pressure: 250 PSI / Max. Operating Pressure: 0-150 PSI.
SAF: 10 Micron Particulate Element, SAFM: 0.1 Micron Coalescing Element / Flow Rate: 37 SCFM @ 90 PSI.
Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 3/4" NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.

...bine system, intake manifold, vacuum line, etc..
[High performance and high-quality metal structure] Compared to other simple smoke leak diagnostic testers, the ANCEL S3000 smoke machine not only has a built-in air pump, but also has a pressure gauge and an adjustable flow meter. The compressor generates air pressure from 0.8 to 14.5 psi, allowing smoke to be easily introduced into the tested sealing system, speeding up the leak detection process..
[Pressure gauge+adjustable flow meter] You can judge whether the tested system has a leak by the pressure change of the pressure gauge. By adjusting the size of the flow meter, you can also better control the amount of visible smoke to locate specific leaks. There are separate air mode and smoke modes to meet your different needs..
[Easy operation] A few simple steps can help you detect leaks in the vehicle system. (1) Add tobacco oil (USP mineral oil/baby oil), you need to buy it separately. (2) Check the power cord (12V DC car battery). (3) Connect the system and test for leaks..

【EVAP SMOKE MACHINE】VXSCAN V3 is a professional vacuum machine for car fuel pipe system leak detection. Supports EVAP system test, tightness test,....
【EASY TO USE】By heating USP mineral oil or baby oil, the automotive smoke machine can be outputs lots of smoke within 30 seconds, to improve....
【SMOKE FLOW METER & PRESSURE GAUGE】Equipped with pressure gauge and adjustable flow meter which helps you control the smoke effect easily. When....
【Air Mode & Smoke Mode】The V3 smoke leak tester adopts an independent switch control design, the air mode independently controls the built-in air....
【WIDELY COMPATIBILITY】Our package includes all accessories (Oil not included), it supports detect the leaks of multi pipe systems on cars,....

HIGH PERFORMANCE: All kinds of gas measurement accuracy is high, suitable for a variety of occasions, you can avoid the trouble caused by the reading error when you measure..
PRECISE: The air flow meter is simple, practical and easy to use. The transparent panel type makes the reading simple, convenient and clear..
CONVENIENT: Gas flow meter is an instrument for measuring gas rate of flow, which is installed in the pipeline to record the gas flow..
Texture of Material: The gauge consists of acrylic, plastic and metal. Lightweight and durable, suitable for long-term use..

HEAVY DUTY 3/4" FEMALE NPT IN LINE COMPRESSED AIR FILTER REGULATOR PIGGY BACK.
250 PSI MAX INPUT PRESSURE, 215 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED.
5 OUNCE METAL BOWL WITH VISIBLE SIGHT GLASS, 140 SCFM FLOW RATE.
ADJUSTS 7 PSI TO 215 PSI, HIGH IMPACT LOCKING COMPOSITE KNOB, 5 MICRON FILTER ELEMENT.
/4" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.05"..

Max. Supply Pressure: 250 PSI / Max. Operating Pressure: 0-150 PSI.
10 Micron Particulate Element / Flow Rate: 176 SCFM @ 90 PSI.
Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 1/2" NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.

➤【Pro Air Flow CFM Anemometer 】Accurately measures wind velocity in 5 units: m/s, km/h, ft/min, knots, mph. wind temp in ℃/℉ , air flow in....
➤【Higher Range Wind Speed Meter 】Higher Wind Speed Range: 0.001~100 mph (Accuracy: +/- 3% +/- 0.2 reading), Resolution: 0.001. Air temperature....
➤【Airflow CFM Meter】BT-846A wind speed gauge measures Wind flow range: CFM 0-999900 ft3/min, Resolution: 0.001-100, Air flow area : 0.001-9999....
➤【Separated Extendable Wind Sensor】Built with user-friendly extendable wind sensor vane, so you can still look at the readings easily while you....
➤【Must Have for Air Balancing】 Designed for HVAC trouble-shooting, air flow balancing. The separated wind speed sensor can be replaced if it’s....