Best Side Mount Battery Terminal

WARN 22680 Quick Connect Winch Power Cable Connector Plugs, 1 Pair

  • {INSULATED FLAME-RETARDANT SHELL}: The shell of the battery quick connect/disconnect is made of high-quality PC flame-retardant material, with a fire rating of UL94 v-0, safe, wear-resistant, and compression-resistant, ensuring stability in use in complex and harsh environments.
  • {SILVER COPPER PLATED TERMINAL}: The thicker copper-plated silver of the battery quick connect disconnect set greatly enhances the electrical conductivity, which helps prevent ignition when large current passes, and ensures stable current transmission.
  • the copper terminal of battery quick disconnect kit is convenient for cold pressing, welding, and faster and firmer wiring.
  • {SPECIFICATIONS AND PACKAGING of the BATTERY QUICK CONNECTOR SET } Voltage: 12-36 volts DC.
  • the package contains 6 groups of 6 to 10 battery quick connectors, including 6 connectors, 12 terminal pins, 6 caps, the quantity is enough to meet your different Demand or replacement.
  • {EASY TO INSTALL}: You can quickly install the plugs of these battery quick disconnect connectors, insert the wires into the terminal pins, and then perform welding or crimping. The ends of the connectors are the same, so both ends are suitable for connecting to the power or load side.
Check Stock

Ampper Side Post Battery Disconnect Switch Battery Master Switch Isolator for Power Disconnect Cut Off with Long Bolt

  • Compatible: with a long bolt, used for side post terminal, battery negative post 3/8" hole only, DC 12 V system, rated current: 125 A, On/Off 2....
  • Convenience: knob type, easy to install & simple to use. Loose / twist of the knob, then power will cut..
  • Heavy Duty: solid made, rust and corrosion resistant, durable made for safety use..
  • Purpose: used for battery to isolate and secure the electrical system, eliminate any power draw from the battery when vehicle or boat is not in use,....
  • Used for GM side post batteries or other batteries which have a 3/8" side post terminal, also used for electrical equipment..
Check Stock

Jamgoer 300A Bus Bar Heavy Duty Module Design Power Distribution Block 12V 24V 48V DC Busbar Box with 4X M8(5/16') Terminal Studs for Battery Marine Automotive RV Car Truck (Red)

  • →[Dimensions}: The bus bar is measured (L x W x H): 138 x 69 x 44.5mm (5.433"x2.72"x1.75"). Stud size: M8 (5/16")..
  • →[High Quality]: Bus Material: The battery distribution block is made of brass and nickel plated, which has good electric conduct performance and sturdy rust-resistant. The base is made of nylon - glass fiber reinforced to protect your safety, ensures great mechanical strength and durability..
  • →[Waterproof & Dustproof]: The power distribution block With four removable side plates, a insulated rear cover, that's designed to withstand rain and dust,resist the air and seawater erosion..
  • →[Unique Design]: The battery terminals base has non-slip sponge, increased Stability. And the blank write-on space on the top allows easy labeling for each branch..
  • →[Easy to Mount]: RV terminal blocks surface screw fixed installation, four mounting holes make this terminal block easier to be mounted in any orientation.Removable windows for unobstructed wiring..
Check Stock

Top Post Battery Disconnect Switch for Auto Car RV Marine Boat Truck Vehicle, 12V 24V Doctor Knife Switch for Negative Post, Battery Cutoff Shut Off Switch, Battery Saver (Horizontal and Vertical)

  • 【COMPATIBLE】This knife blade battery disconnect switch works well for RVs, marine, cars, boats or UTV- all standard car electric system as long as the battery has 15-17mm cone/tapering battery negative post. Only mount on NEGATIVE POST.
  • 【TOP MOUNT】Fit for top post terminal with 15-17mm cone, DC 12V-24V system, 250A continuous and 750A crank at DC 12V, on/off 2 position, operate vertically.
  • 【HIGH-QUALITY】Our battery kill switch is made of solid brass and copper. It features superior performance and good conductivity. It also can be used in marine and corrosive environments and keeps your battery far away from rust and corrosion.
  • 【EASY TO USE】Knife blade type, easy to install & simple to use. When you are not using the car or it is stored for long periods, just simply raise the lever to disconnect the battery from the car. You can adjust this battery switch through the bottom of the screw, into a vertical knife switch or a horizontal knife switch.
  • 【INSTALLATION】 Firstly, disconnect the battery cables from the battery, always disconnect the negative cable first followed by the positive cable. Attach the battery disconnect to the negative battery terminal and tighten but do not overtighten. With the lever on the switch continuously open, ....
Check Stock

CZC AUTO 1-2-Both-Off Battery Disconnect Switch 12V 24V 48V Master Isolator Cut Off Switch Battery Selector Switch for Marine Boat Car Truck Camper Trailer RV Vehicles

  • SOLID BATTERY TERMINAL: made of durable brass and electroplated with copper, which is rust and corrosion resistant, for safety use. With bright metallic color for easy daily check. With a long bolt for convenience.
  • WIDELY APPLICATION: apply to the battery has side post terminal with 3/8’’ hole. Also used for electrical equipment. DC 12V-24V system, 250A continuous and 750A momentary at DC 12V. CZC AUTO blade switch is suitable for car, boat, truck, vehicle, RV, ATV and etc..
  • EASY TO INSTALL & USE: assemble the battery shut off switch to the negative cable. Turns power on and off by just lifting the lever up or down, on/off 2 position.
  • NO MORE DRAINED BATTERY: batteries that are empty and not charged for a long time will shorten the life causing you to replace it. This battery cutoff blade type switch allows you to eliminate any unwanted parasitic power draw from the battery.
  • WARRANTY: CZC AUTO offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PlEASE NOTE: Any problem in using our side post battery terminal negative disconnect switch, simply contact us, your problem will be solved within 24 HOURS.
Check Stock

Andmon MINI160 10 Miles Portable Solar Electric Fence Charger with DayNight Mode, Black, 8.66x11.02x6.69 inches

  • Powerful Energizer: Electric Fence Charger is compact and easy to install and move, making it the ideal solution for strip grazing. Energizes up to 2 miles of electric fencing.
  • Portable and Tough Solar Electric Fence Charger: Mini160 solar fence charger is a portable, super tough unit that’s quick and easy to install, and comes with built-in solar panels and an internal super quality GEL acid battery, Simply mount on a suitable steel rod and connect to your fence..
  • Peace of Mind of a Reliable Solar Fence Charger: Super panel, GEL battery and super battery management guarantee reliable power in harsh low light conditions. Set and forget for reliable power 24 Hours /21 Days..
  • 360 degree rotation allows charger to rotate on T-post to face sunlight. Quality Guaranteed: 1 year warranty.
  • Note: The internal battery is not connected for safety purpose, please open the battery cover and connect the battery before using(Red cable connects to thered postive(+) battery terminal, black cable connects to the black nagative(-) battery terminal)).
Check Stock

Biaungdo One Pair Zinc Alloy Battery Side Terminal Charging Posts Fit 8mm Positive + or Negative - Battery Cable terminals

  • Converts side terminal battery to top post,each Charging Posts features a hex nut ring for tightening with a wrench..
  • remark positive (+) or negative (-) at the bottom.
  • These battery side charging posts are made to fit the threads on automobile batteries only. They do not fit any type of power sport batteries..
  • These terminal charging posts are used for charging side post batteries on automobile as well as converting side batteries to top post batteries on....
  • NO RISK PURCHASE-Just try our products and we believe that you will love them as we do,if you don’t absolutely love them let us know and we will we....
Check Stock

Power Wheels Adapter for 20V DeWalt Battery 18V Dock Power Connector Battery Adapter with 14 Gauge Robotics, Yellow

  • ...84, DCB204 and DCB205, DCB200, DCB203, DCB606, etc..
  • 【Easy to Use】Just move the power mount connector to the inside of the groove gently, then install the battery into the connector. Adapter has 14 gauge wire installed, The red wire is connected to the positive battery terminal, and the black wire is connected to the negative battery terminal..
  • 【Perfect Fit】Battery dock adapter locks on you battery very well. Meanwhile, battery adapter has compact size and light weight, which is easy to use and carry, will not bring you any burden. The battery adapter is equipped with fixing screw holes for easy fixing with screws.Premium material make it safe..
  • 【Wide Usages】Adapter has 14 gauge wire installed, which is suitable for DIY high power applications. Upgrade your power wheels, RC toys, robotics, electric bicycle, bluetooth speaker and portable welder, etc..
  • 【Best Service】If you have any problems, please do not hesitate to contact us, VRBFF Customer service will get back to you with completely satisfying reply within 24 hours.  'We are Best Friends Forever'..
Check Stock

ORCISH Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer (White)

  • Wide applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
  • Package comes with 6 sets 6-10 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
  • Quality material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
  • Easily installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
  • Stable working environment: there are 12 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.
Check Stock