Best Shore C Scale

Silver Adhesive Electrically Conductive Epoxy Bonding Heat Cure 1 Part AA-Duct 2979, 2.5gm Syringe

  • Viscosity At 25 °C cps 350,000, Shelf Life 4 months At 25 °C, 6 months refrigerated.
  • Mechanical Properties Hardness, Shore D 84 Adhesive.
  • Volume Resistivity ohm-cm 3 x 10-4, Appearance Silver, Cure Type Heat cure.
  • cure time 15 min At 150 °C, or 1 hour At 125 °C.
Check Stock

Epoxy Adhesive Optically Clear High Impact,Two Part Low Viscosity AA-Bond F113 5gm Pouch

  • Spec. Gravity 1.23 g/cc Mixed Viscosity 175 cP At 25°C, Thixotropic Index 1.0.
  • Mechanical Properties Hardness, Shore D 86, Pot Life 1.5 hours, Refractive Index 1.51.
  • Glass Transition Temp (Tg), ultimate 102°C.
  • cure time 24 hrs At 25°C, 1-2 hrs At 65°C.
Check Stock

Electrically Conductive Adhesive, Silver Filled Epoxy, Long Pot Life AA-Duct 902LP, 5gm kit

  • Spec. Gravity 2.79 g/cc Mixed Viscosity Paste At 25°C Reactive solids contents, % 100,Pot Life 3 hrs.
  • Volume Resistivity 003e 0.0001,Shrinkage linear in/in 0.003 Lap shear strength, psi 9600.
  • Operating Temperature --50 to +170 °C,Appearance Silver.
  • Cure Time 2 minutes At 120°C,5 minutes At 100°C,12 hours At 25°C.
Check Stock

Electrically Conductive Epoxy, Carbon Filled Adhesive, Room Temperature Cure, AA-CARB 61, 10gm kit

  • Spec. Gravity 1.35 g/cc Compressive Strength, psi 13,000 Pot Life 30 minutes Appearance Black.
  • Mechanical Properties Hardness, Shore D 85.
  • Vol Resistivity ohm. cm 003c 40 Operating Temp -50 to 145 °C Mix Ratio/weight 100:10 / Resin:Hardener.
  • Cure Time 24hrs At 25°C, 1 hr At 60°C , 15 minutes At 100°C.
Check Stock

Silver Epoxy, Electrically Conductive Adhesive, Highly Flexible Non-Bleeding AA-Duct 2919, 2.5gm kit

  • Spec. Gravity 2.32 g/cc Mixed Viscosity 995000 cP at temp 25.0 °C.
  • Mechanical Properties Hardness, Shore D 80 Adhesive Bond Strength 90 psi Lap shear 2 hrs At 65°C.
  • Electrical Properties Volume Resistivity 0.00011 ohm-cm,Dielectric Constant 4.8 At Frequency 1000 Hz.
  • Cure time 4 hrs At 65°C, 24.0 hour At 25°C.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 50gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 2.5gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

Low Cost, 1 Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive AA-DUCT AD1, 2.5gm Syringe

  • Mixed Viscosity 6800 cP, Density gm/cc 2.35, Silver percentage 65-75.
  • Mechanical Properties Hardness, Shore D 83, Pot Life 6 months At 25 °C 9 months refrigerated.
  • Sheet Resistivity 10-12 m?/sq, Lap shear strength 2000 Lb/in2.
  • Cure Time 0.7 hours At 200 °C, 1.5 hours At 180 °C, 2.5 hours At 160 °C.
Check Stock

Electrically Conductive Epoxy, Silver Adhesive, Room Temperature Cure, Air Dry AA-Duct 907, 5 gm kit

  • Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100.
  • Mechanical Properties Hardness, Shore D 83 Adhesive.
  • Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002.
  • cure time 2 minutes AT 120°C,5 minutes At 100°C,12 hours At 25°C.
  • Mix Ratio, parts by weight 100/100 Resin/Hardener.
Check Stock