Best Sheet Rod Coil

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

Misfit (Prep)

  • Constant rate front coil springs can help improve stability and maintain ride height.
  • Variable rate rear coil springs provide 500 lbs (per pair) of load capacity. [Not to exceed vehicle GVWR (Gross Vehicle Weight Rating). Product does not increase payload.].
  • Seamless Drawn-Over-Mandrel (DOM) tubing decreases internal component wear, resulting in longer service life. Greater heat dissipation, improved cooling and reduction in fade for continued performance.
  • Super finished, chromed, piston rod provides anti-corrosion properties, a more consistent wear surface, proper seal lubrication, and longer product life.
  • Real-world tested to ensure that the shocks will fit intended vehicles and applications.
Check Stock

Gabriel 43163 Rear Load Carrier 2 Pack

  • Constant rate front coil springs can help improve stability and maintain ride height.
  • Variable rate rear coil springs provide 500 lbs (per pair) of load capacity. [not to exceed vehicle gvwr (gross vehicle weight rating). product does....
  • Seamless drawn-over-mandrel (dom) tubing decreases internal component wear, resulting in longer service life.
  • Super finished, chromed, piston rod provides anti-corrosion properties, a more consistent wear surface, proper seal lubrication, and longer product....
  • Real-world tested to ensure that the shocks will fit intended vehicles and applications.
Check Stock

OMT Spring Compressor 11-1/2 Macpherson Strut Spring Compressor 13/16 Socket 1/2 Drive to Compress The Coil Spring Set of 2

  • Heavy Duty 11-1/2” Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring.
  • For repairs on bent struts, strut tubes, and damaged pieces.
  • Attach the brackets completely onto the spring, tighten, and remove the strut.
  • Lubricate threads with anti-seize compound for prolonged life..
  • Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression.
  • Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools..
  • Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs)..
  • Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ....
Check Stock

Rancho RS66118BR5 Suspension Kit

  • COMPATIBILITY -- Designed for 2-door Jeep Wrangler JK.
  • BUILT FOR THE TRAIL -- Designed to fit up to 33-in. tires, get 2-in. of additional ground clearance needed for trail riding or on-road driving (can accommodate 35-in. tires with trimming.
  • bumpers, sliders, winches, etc. affect lift height).
  • COMPLETE SOLUTION -- Kit includes four Rancho RS5000X shocks, front and rear progressive rate coil springs, front bump stops, rear brake line relocation brackets and mounting hardware.
  • ENHANCED CONTROL -- Rancho RS5000X shocks provide additional control, reduces body roll and prevents rod overextension inside the shock.
  • SUPERIOR PERFORMANCE -- Front and rear progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance.
Check Stock

ACDelco Specialty 519-32 Front Spring Assisted Shock Absorber

  • Constant rate front coil springs can help improve stability and maintain ride height.
  • Variable rate rear coil springs provide 500 lbs (per pair) of load capacity. Not to exceed vehicle gvwr (gross vehicle weight rating). The product does not increase payload.
  • Seamless drawn-over-mandrel (dom) tubing decreases internal component wear, resulting in longer service life. Compressed length: 8.67 inch.
  • Super finished, chromed, piston rod provides anti-corrosion properties, a more consistent wear surface, proper seal lubrication, and longer product life.
  • Real-world tested to ensure that the shocks will fit intended vehicles and applications. Compressed Length-8.67 inch. Extended Length-13.28 inch. Stroke Length-4.61 inch.
Check Stock

Ticon Industries - CP1 (Grade 1) Titanium Welding Filler Rod 39” Length - 1mm/.039' (1/4lb)

  • CP1 grade Titanium Filler Rod offers the the best weldable characteristics of any grade of Titanium for manufacturing exhaust systems or other applications.
  • High Grade Commercially Pure Grade 1 CP1 Titanium offering the highest corrosion resistance and formability of any grade of titanium.
  • 1mm /.039" Titanium Filler is designed for lighter duty use such as thin walled tube welds, sheet to sheet welds, and light duty bracket welds..
  • The 1mm filler rod comes packaged by the quarter pound which usually equals approx. 27 rods in a 39" length.*.
Check Stock

LORADAR 6.5Feet 200lb Fishing Coiled Lanyard Stainless Steel Inside Heavy Duty Fishing Safety Rope Extension Cord Tether for Deep Sea Fishing Tools Rod Kayak Paddles (Orange, 6.5ft)

  • Safety retractable lanyard, tool lanyards safety,coiled lanyard fishing, Maximum tensile length 6.5ft (2m) diameter 5.0mm (built-in steel wire diameter 2.0mm) can withstand 200lb. Steel wires covered with TPU, heavy duty and recovers well after stretching.Fishing safety rope wire is applicable for outdoor recreation, not only fishing, but also hiking, camping and hunting..
  • Fly fishing retractable lanyard, kayak fishing pliers, kayak lanyard, pliers with lanyard, rod tether, rope tools,bungee paddle leash. Stainless steel Locking Carabiners,which are Anti-rust, anti-corrosion,and it is rotatble within 360°.this Heavy Duty Coil Lanyard are wrapped in thigh quality TPU material,sof and flexible,which is more elastic and tougher than PVC,do not hurt your hand,and more durable.
  • Fishing line tool, fishing pliers lanyard, fishing retractable lanyard, lanyards for fishing, fishing rod leash kayak.the aluminum carabiner with spring-loaded and interlocking wire gate allows for easy single-handed use, more convenient and sturdy enough,and very easy to replace.It is ideal for fishing rods, fishing pliers, fishing grips..
  • Boating lanyard, boating tools, carabiner tether, coil tether,fishing pliers, coiled tether, paddle leash safety rod,kayak paddle tether. Fishing....
Check Stock

Meccano by Erector, Ducati Monster 1200 S Model Building Kit

  • Hit the road at top speed with the real engineering of Meccano and the unique styling of the Ducati Monster 1200 S!.
  • With real steering, multi-piece wheels and coil-spring suspension this bike is ready to handle even the toughest tracks..
  • Ducati Monster 1200 S measures 9.5″ long X 3″ wide X 4.75″ tall..
  • Ducati Monster 1200 S is for ages 10 and up. No batteries required..
  • Includes: 292 Parts, 2 Real Tools, 1 Sticker Sheet, 1 Instruction Sheet.
Check Stock