Best Sfp 1000base

NEW Sealed Cisco GLC-TE GBIC 1000BASE-T SFP Transceiver Module 30-1475-01 Copper RJ45

RJ-45 Transceiver, 1.25Gb/s date rate Copper SFP, 1000Base-T SFP, RJ45 SFP, reach 100m distance.

Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice.
PCIe GbE Fiber Network Card with Open SFP Slot.
Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.
No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.
Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design.
Compatible with most Gigabit SFP modules.
Supports Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX.
Includes low-profile/half-height installation bracket.
Compliant with IEEE802.3z 1000Base-SX/LX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x full duplex flow control, RFC 1157 SNMP v1.

【Convert Fiber to Ethernet】Designed to convert 1000BASE-SX/LX fiber to 1000Base-T copper media or vice versa..
【Versatile Compatibility】Works with both single-mode and multi-mode fiber SFP modules and is fully compatible with 10/100/1000 Base-T Ethernet connections..
【Easy to Use】Plug and play with no software installation or configuration needed..
【Auto-Negotiation Gigabit Connection】Auto-negotiation RJ45 port supports Half-Duplex/Full-Duplex transfer mode and auto-MDI/MDIX..
【Long-Range Transmission】When used with different types of SFP modules, the Hot-Swappable FX Port extends fiber distance up to 12.4miles (20km) for Single-Mode transmission and 1,800 feet (550m) for Multi-Mode transmission..

Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis.
Open SFP slot supports MSA-Compliant Single / Multi-Mode Gigabit SFPs at varying distances.
Advanced features include Link-loss forwarding, remote monitor status, two frame lengths.
Convert and extend a Gigabit Ethernet connection over fiber using the Gigabit SFP of your choice.
Compatible with NETGEAR ProSAFE JGS524NA / Comparable to ET91000LC2.
Fiber to Ethernet Converter w/ Open SFP Slot / Multi / Single-Mode Fiber Converter.
1000 Mbps Gigabit Ethernet Media Converter / Fiber Optic Converter / Ethernet Over Fiber-1000Base-SX.
Extend/Bridge networks over to fiber another building.

Web Smart Switch with 24 10/100Mbps Ports, 2 10/100/1000BASE-T and 2 combo 10/100/1000BASE-T/SFP.
Security Features: Access Control List, D-Link Safeguard Engine and Port Security.
Intuitive Management: SmartConsole or Web-Based GUI, Built-in MIB Browser for SNMP, D-View 6.0 Module Support and Compact CLI through Telnet.
Supports Auto Voice VLAN and DSCP QoS for VoIP Application.
PoE support for 802.3af and 802.3at up to 193W total budget.24-Port Fast Ethernet PoE Smart Managed Switch with 4 Gigabit Ethernet ports (including 2 Combo SFP) (24 x PoE ports, smart fans).

WIDE COMPATIBILITY:This 10G Copper SFP+ Transceiver is 100% compatible for Cisco SFP-10G-T-X, Ubiquiti, D-link, TP-LINK, Supermicro, Netgear, Mikrotik, Unifi and Other Open Switches, connecting 10g ethernet Switch, Edge Router, media converter.
CABLE DISTANCE:10GBase-T SFP Module supports Links up to 30m using Cat 6a/7 or Better Cable , works for 5GBase-T, 2.5GBase-T using Cat 6a/7, and 1000Base-T using Cat 5e cable or better(10G SFP+ Ports).
PROTOCOLS: 10Gb RJ45 SFP Compatible SFF-8431 and SFF-8432 MSA , IEEE 802.3az.
Each Module is individually 100% tested on the 10G RJ45 Ethernet Switch before delivery.
HOT SWAPPABLE:Hot-swappable transceivers that plugs into an 10Gb SFP+ port,plug and play,no need to power down if installing or replacing.
SUPPORT: 30 Days Free-returned, 3-year Product Quality Assurance, Free Lifelong Technology Support..

Device Type: Ethernet Switch, Form Factor: Rack-mountable.
Includes eight Power over Ethernet Plus (PoE+) RJ45 10/100/1000BASE-T autosensing ports, two dual-personality ports (either Small Form-factor Pluggable (SFP) or RJ45 10/100/1000BASE-T autosensing ports), and DC power connector.

100% Compatible-Independently Compatible for Cisco Brand 1.25 Gigabit Ethernet 1000BASE-SX standards, EEPROM data coding and writing to Cisco GLC-SX-MMD, Cisco GLC-SX-MM SFP-GE-S,GLC-SX-MM-RGD.
Wide Compatible-Dependently for Open Sources brand,including Ubiquiti, Netgear, Brocade E1MG-SX-OM, Unifi, Finisar FTLF8519F2XCL, Mikrotik, Trendnet, TP-link and Dlink DEM-311GT, Zyxel, Trendnet, Supermicro, Qnap, Linksys etc.
1G SFP SX-1000BASE-SX 1.25Gbps SFP Mini-GBIC, multi-mode, mm, 850nm, [email protected], full duplex LC Hot pluggle, auto-negotiation, low power consumption, operation temperature range for 0 to 70°C (23 to 158°F). Support DDM , MSA compliant.
Easy to install-It supports real-time configuration, plug and play, hot pluggable sfp footprint. It doesn't require any setup or installation for either device. It greens up immediately and connects right away..
Reliable Assurance-All of our products have gained TUV, UL, CE, FCC, RoHS, REACH, FDA professional certifications.
tested by different projects,such as Temperature Cycling,Mechanical Vibration,ESD HBM,EMC,Cyclic Moisture Resistance and Fit&MTBF etc..
and programmed by various brands of the latest and advanced networking switches or other equipments to ensure the reliability..

【SFP to RJ45 1000Base-T Copper SFP】Transmit data seamlessly up to 100 meters between your SFP interface and the copper gigabit port..
【Wide Compatibility】Compatible with most fiber switches, media converters, routers or other fiber optic equipments with SFP ports, TL-SM331T provides additional copper cable connections for peace of mind..
【Easy for deployment】Plug and Play with no software installation or configuration/technician needed..
【Durable Metal Casing】Ensures strength and reliability for a long time, maintaining a stable connection in a wide range of environments..
【Hot Pluggable】Plug in or remove your SFP module without needing to shutdown your network. Hot swap-ability ensures your network always stays up..